line for electric used for sale

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, 4-cylinder water-cooled Ricardo engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA never used 0 hours, The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-45833-161

COMPAL POWER VG-R50 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 50 kW-62, 5kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 1100 kg Auction-ID: A7-45834-247

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-45834-333

Code 1212197 Jenbacher gas/air mixture intercooler NEW for 312-316-320

Electric drum pumps HYDAC 3 pieces, transport trolley

Electric Desk KARKMANN Decor Light Oak, Mobile Container PALMBERG Decor Maple, Sideboard, Decor Maple 85x80 cm

Office furniture PALMBERG décor Oak electric desk Crew T approx. 200x100 cm semicircular set, desk approx. 200x80 cm w. 3/4 neckline, sideboard PALMBERG Prisma 2 approx. 100x85 cm, flipchart

Electric stacker YALE MS14AC load capacity 1,400 kg built in 2014, S/N C852T05350M, weight without battery 900 kg, 1.2 kW, battery 274 - 302 kg, 24 V, triplex mast height approx. 185 cm, lifting height 4,627 mm, 3804 discharged. Bra (18.03.25), internal No. 50

Belt conveyor belt MTF electric motor approx. 3,500x600 mm, rollable

Cast resin transformer SCHNEIDER Electric Trihal, S/N 1038653, year 2010, 630 kVA, S/N 776716-01, weight without housing 1,920 kg, transformer 5, still needs to be disconnected from the power. The customer must order the electrician for this.

Electric wire rope hoist SWF hook load 500 kg, is needed for loading basement

Auction-ID: A1-43332-2

pallet of electrical material TEHALIT + claw, end plates, duct sockets, fuses, press inserts, underfloor heating regulators and other electrical parts Auction-ID: A7-45960-40

ETON + Jung electrical material, green cavity wall sockets, fuses, cable lugs and accessories Auction-ID: A7-45960-36

Range of Hager + Jung + OBO electrical installation material, built-in appliance sockets, sockets, cavity wall sockets, cable clamps, sealing screws, seals, etc. Auction-ID: A7-45960-46

Pallet of electrical material KAISER + Hagen, screw connections, air contactor, capacitors, covers, cavity wall boxes red, etc. Auction-ID: A7-45960-37

Range of electrical installation material Hager + OBO, various CE plugs + sockets, counters, built-in sockets, frames, fans, panels, nipples, plug screws, cable clamps, etc. Auction-ID: A7-45960-47

Range of electrical material lighting technology Popp + Helios + Hager, untested various spotlights + lamps, louvre luminaires, smoke detectors Auction-ID: A7-45960-49

Pallet of electrical installation material Trinnity + Schlegel, motor control units for awnings, cable clamps blue, cable clamps Auction-ID: A7-45960-42

Range of electrical installation material Müpro + Würth, various cables + screws, Stumb clamps, wall brackets, mounting materials various Auction-ID: A7-45960-41

Pallet with electrical material Hagen + Berker, junction boxes, cable glands, CE sockets blue, junction boxes etc. Auction-ID: A7-45960-35

ABB electrical installation material range, various ABB + Hager junction boxes and other accessories Auction-ID: A7-45960-39

Pallet with electrical installation material Mennekes type flail, various CE plugs + type 13523 and sockets type 14523, controls for ceiling cranes ABUS, clamp cable connectors Auction-ID: A7-45960-43

Pallet with electrical material Stübbe + Reca + Borgh + Würth, pipe clamps, screws, duct boxes + others Auction-ID: A7-45960-34

Range of electrical appliances SIEMENS + DIMPLEX + COSMO, 1 instantaneous water heater Siemens, 2 Thermo Dimplex ACK 5 U, 1 Therme Tec LINE, 1 hygiene dispenser Multi Plum, 6 panel radiators E 11 Auction-ID: A7-45960-17

Electric motors 1 pc. LOHER 30 kW 255 kg 1 pc. GARDNER DENVER 1.3 kW, 1 pc. NASH-ELMO 5.5 kW, 1 pc. smaller, total approx. 6 pieces

Manufacturer: ABB Type: CCV (IEC 60298 compliant) Function: Protection and medium-voltage network power supply ⚡ Electrical characteristics Rated voltage (your): 12 kV Withstand voltage at power frequency (Ud): 28 kV – 1 min Lightning shock withstand voltage (Up): 95 kV peak Rated Frequency (fr): 50 Hz Rated Current (Ir): 630 A Short-term ampacity (Ik): 21 kA Short Circuit Duration (tk): 3 s Partitioning class: PM (metallic) Ingress protection: IP2X Ambient temperature: -25°C to +40°C Internal bow type: AFLR (on request)

3x Container Power Generators NEW PLANTS! Cummins QSK60-G4 LTP power: 2233 kVA PRP Power: 2030 kVA Year: 03/2026 Operating hours: None Speed: 1500 1/min Tank approx. 4000 liters Generator: Mecc Alte ECO46 1L/4 Voltage: 400/231 V, 50 Hz Generator circuit breaker 4000 A, battery charger, cooling water preheating, DEIF control AGC4-MK2 for Island and parallel operation. Warranty: 12 months or 1000 hours after delivery, whichever comes first. Individual sale possible. Subject to prior sale - errors possible! Internal Reference Number: E-1004-105

Load capacity: 2000kg; electr. lifting: yes; electr. Driving: yes;

Sell a used, fully functional Sveba Dahlen TP12 continuous pizza oven. The stove has been in operation for 2 years and has never been broken, has been regularly serviced and cleaned. Original price: 18.000€ VP: 12.000€ net plus VAT Attention: Location is Croatia. Pick-up in Zagreb is necessary. Invoice with VAT. is possible.

Keys, access cards, passwords Standard PIN: 12345# Auction-ID: A1-45975-22

Electric roller paternoster for 6 rollers of approx. 2,000 mm each

Electric cutting table/ CNC cutting system R&R Sondermaschinen GmbH Type Lynx 2F Year 2007, S/N 0003, EOT head not available, Work table approx. 3,300 x 2,000 x 900 mm, Working pressure 6-8 bar, Year 2007, PC FUJITSU Esprimo E9900E-Star5, S/N YL6X011642, Monitor FUJITSU P19-1A, S/N YEBL008252

Cutting shelf table with electric rotary cutter Table size approx. 2,100 x 1,200 x 800 mm

2 UNITS/SETS OF LON0015/I PACKED TOGETHER. A SINGLE LON0015/I CORRESPONDS TO: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16 ...

2 UNITS/SETS OF LON0004/I PACKED TOGETHER. A SINGLE LON0004/I CORRESPONDS TO: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 1200W,0-150RPM. Tap Range: ISO M6-M30 COLLET: M6-8,M10,M12 ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-156 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30,M33,M36 Machine condition:  ...

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise c ...

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise c ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-156 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30,M33,M36 Machine condition:  ...

2 UNITS/SETS OF LON0011/D PACKED TOGETHER. A SINGLE LON0011/D CORRESPONDS TO: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10 ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchecke ...

2 UNITS/SETS OF LON0013/D PACKED TOGETHER. A SINGLE LON0013/D CORRESPONDS TO: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10 ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 1200W,0-150RPM. Tap Range: DIN M6-M30 COLLET: M6-8,M10,M12,M14,M16,M18-20,M22,M24,M30 Machine condition: unchecked. Approx. Transport ...

Bench linear chamfering machine for angles from 15° to 45°. Height 0-3 mm, power 550 W, 2800 rpm. Item size 535 x 385 x 300 mm, item weight 38 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 550 x 300 mm; Approx. Weight: 38kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-331

- Compact aerial platform for indoor use - Goes straight up + small swing arm (JIB) - Ideal for narrow spaces Typical Specifications (E300 AJP) - Working height: ± 10 – 11 meters - Platform height: ± 8 – 9 meters - Load capacity: ± 200 kg - Drive: electric (battery) - Very manoeuvrable (small turning radius) ️ Usage - Warehouses - Maintenance (lighting, pipes) - Installation - Interior Auction-ID: A3-43519-11417

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-156 r/min. TAP RANGE:DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30,M33,M36 Machine condition: u ...

Battery strapping machine for polyester strap with vibration welding. Designed to apply high tensions to the strap, it has a maximum tensioning capacity of 2800 N expressly designed for polyester, PP or PET strapping, strap width from 13mm to 16mm, thickness 0.5 - 1.2 mm. It guarantees excellent performance by combining the solidity of the mechanics with the practicality and precision of digital technology. 3.0Aih12VCD lithium battery. Recharge time 90 minutes, strapping cycles for each recharge from 100 to 220. Weight about 3 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 180 x 300 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-300

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx.  ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 1200W,0-150RPM. Tap Range: ISO M6-M30 COLLET: M6-8,M10,M12,M14,M16,M18-20,M22,M24,M30 Machine condition: unchecked. Approx. Transport ...