linde h 35 used for sale

Control unit for electric forklifts, control system, control unit, interface, motor control, motor controller, control, drive control, drive current control -Handover: in its current condition as inspected -Connector plug: Damaged, see photos -Manufacturer: Linde, control unit from electric forklift E15Z-02 -Type: LDC-20/15-FE02 -Mat-No.: 390 360 53 97 -Dimensions: 185/120/H65 mm -Weight: 0.6 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Toyota, forklift mast, unobstructed view mast from front forklift type E15Z-02 -Load capacity: 1500 kg -Lift height: mm -Dimensions: see photos / technical drawing -Transport dimensions: 2480/1040/H330 mm -Weight: 504 kg

Content: 150 litres Double jacket for cooling/heating Max Temperature: 160°C Drive motor: 15 KW Hydraulic power unit: 1.5 KW Tilting mixing trough for easy emptying Product contact area in stainless steel (all internal parts with product contact)

weight max.: 3000 kg speed: max. 10.0 km/h Number of working hours: 10.015 h weight of the machine ca.: ca. 1000 kg Tugs were used by BOSCH (DE) Battery was boosted” in 04/2024 Maneuver and transport agilely and safely in narrow aisles The P30 electric tractor and platform truck from Linde Material Handling is suitable for flexible and safe transport processes on small and medium-sized businesses Distances – even and especially when there is little space available. The Vehicle has precise and self-centering power steering that the driver safely controlled with an ergonomic two-handed handle. Also relieved The compact design of the P30 allows you to maneuver in narrow aisles. The powerful three-phase motor accelerates quickly to the maximum Speed. Ensure a comfortable and secure stand while driving the adjustable backrest and the fully suspended standing platform non-slip floor cove ...

Double Z, screw mixer Laboratory Mixing Machines for approx. 60l usable capacity Stainless steel boilers and mixers 1 speed, Boiler tilt function for emptying with lockable lid

weight max. in kg: 8000 kg fork length: 2400 mm stroke: 4800 mm fork arm (length x width x thickness): 2400 150 70 mm Fork Side Shift: Kaup 6 T 151 P2 total power requirement: ? kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: ? m Forklift Weight 12,5 to. Working Hours 10.500. Workspace: Stroke 4800 Control: Capacity 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

Fluid mixer for tempered mixing with double sheath, 350 l. content (usable volume: 100 l. - 280 l.), outlet sideways, pressure-resistant up to 10 bar, product-contacted parts made of V2A 1.4541; without tools.

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h

Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: AL A6VM 355 HD2D / 63W 2-VZH157D B-S0167 Condition : New

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Willmann, hydraulic cylinder type 50/35x350 -Stroke: 350 mm -Piston rod: Ø 35 mm -Hole diameter: 120 x 10 mm -Dimensions: Ø 145 x 545 mm -Weight: 11.1 kg

Heidenhain RON 705 18000 02S09-04 355 879-01

Technical data: Condition: New device Working pressure: adjustable from 170 to 350 bar Flow rate: 17–21 l/min Pump: Ceramic Triplex Plunger Pump Pump speed: max. 1,450 rpm Hydraulic power: 14 kW / 19 hp Engine: Honda 2-cylinder 4-stroke petrol engine Engine power: 16.4 kW / 22 hp Motor speed: max. 3,150 rpm Electric starter with engine oil pressure monitoring Fuel consumption: approx. 5.5 l/h Tank capacity: approx. 20 litres Water connection: GEKA High pressure connection: M22 × 1.5 Maximum water temperature: 40 °C Required water inlet pressure: 1.8–6 bar Dimensions: 79 × 79 × 99 cm Weight: 130 kg Chassis: Two-wheeler trolley with pneumatic tyres Item number: 1487050 Standard equipment includes a 10 m high-pressure hose, a high-pressure gun with an approx. 800 mm long spray lance, nozzle holder, 15° flat spray nozzle, pressure gauge, infinitely adjustab ...

The new Holzprofi Maker lifting work table supports the ergonomic loading and unloading of goods on pallets or similar means of transport. The diverse functionality increases productivity in the long term and optimizes work processes in your company. Heavy and stable design. Hydraulic lift for easy foot operation. Advantages and features: - The work table is characterized by high stability and easy mobility - Easy height adjustment using a hydraulic foot pedal - Robust construction and yet mobile thanks to maneuverable castors - The robust castors, the smooth-running foot hydraulics and the extremely durable worktop ensure stability, maneuverability and a comfortable working height. - Versatile, storage aid, stacking trolley and additional work table in one - MDF perforated grid plate as standard with 20mm hole size and 80 x 80mm grid - The HUB-350MDF-Schwenk model is also available with ...

It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system.

This 4-axis HELLER MCH 350 was manufactured in 2006, featuring a Siemens 840D PL control system and a robust spindle capable of 7,000 rpm. It includes a HSK 100 tool clamping system and a large magazine with 234 slots. The machine offers a substantial working area of 1250 x 1000 x 1000 mm and a pallet size of 800 x 800 mm. For more information about this machining centre, please reach out to us.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with 2-axle turntable steering -Platform: 3500/1450/H645 mm, dimensions see photo technical drawing -Load capacity: 4 t -Tires: Solid rubber -Number: 2x transport trolleys available Price: per piece -Transport dimensions: 5030/1690/H1460 mmm -Weight: 1100 kg/unit

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, excavator cylinders -Manufacturer: O&K, hydraulic cylinder with control valve stroke 470 mm -Type designation: 1 713 351 1554 541 -Piston rod: Ø 70 mm -Hole diameter 120/60 mm, hole spacing 970/1440 mm -Dimensions: 1160/390/H230 mm -Weight: 99 kg

x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm Control: Siemens 840 C total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Höcker Polytechnik Type L 350 radial fan for extracting swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: Motor power: 11 kW Inlet: 350 mm Outlet: 350 mm Air flow rate: 9,770 m³/h Condition: Gebraucht Location: Tauberbischofsheim, Germany

x-travel:1800 mm y-travel:1600 mm z-travel:1400 mm B-axis (table):360° size of pallet:1000 x 1250 mm workpiece swing dia.:2100 mm workpiece weight:3500 kg spindle taper ISO:50 spindle drive motor:37 kW spindle turning speed range:25 - 10000 U/min feed range:40/50 m/min rapid power traverse circular:10 U/min total power requirement:90 kVA weight of the machine ca.:43 t dimensions of the machine ca.:11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

table length: 910 mm table width: 500 mm table height: 350 - 1300 mm weight max. in kg: 350 kg : 950 mm stroke height: 1300 mm weight of the machine ca.: 110 Kg dimensions of the machine ca.: 100 x 550 x 400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The reverse osmosis system is used for the desalination of softened water with a salt content of up to 1,000 mg/l. It is equipped with a high-quality centrifugal pump with frequency converter (FU). Frequency control reduces electricity costs by 30 - 50 %, extends the life of the system and keeps permeate production constant regardless of operating pressure. The RO digital microprocessor control enables fully automatic operation with logging of all relevant operating data and freely adjustable limit values. The system can be connected to the central control system via optional interfaces. Advantages : Equipping with FU saves 30 - 50 % on electricity costs, keeps permeate production constant and enables longer service life and particularly quiet operation Versatile RO digital control with storage, operating data and many setting options Optional equipment with PLC Siemens S7-1200  ...

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

cutting diameter: 355 mm dimensions of saw-band: 3770 x 34 x 1,1 mm cutting speed: 20 - 80 m/min cutting width: 490 x 280 mm : 290 mm Impact energy: 250 mm : 230 mm : 180 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions: 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PLC control, supply unit, converter, power module, U/E module, digital power amplifier -Manufacturer: Hydraulik Ring, digital power amplifier -Type: VRD 350 -Voltage: 24 V -Dimensions: 220/80/H130 mm -Weight: 0.8 kg

Guide track, guides, tool slide, cross table, cross slide, bed guide track, machine bed -Guide track: from Meuselwitz lathe -Measures: see drawing in the photos -Dimensions: 780/355 / H390 mm -Weight: 135 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 353 mm -Piston rod: 25 mm -Dimensions: 575/95/H95 mm -Weight: 7.65 kg

Qty. 1 Second-hand paper coating machine Mfc.: SBL Model: HCUV-350 automatic coating machine Built: 2003 Max. sheet size: 1060 x 740 mm. Min sheet size: 450 x 360 mm. Max. coating area: 1050 x 730 mm Spot coating Speed: 7200 sh/h Automatic feeder with vacuum IR dryer for better varnish heating UV dryer with 3 lamps and cooling system delivery stacker

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm -Weight: 132 kg

Fire extinguisher cabinet for fire extinguishers, powder extinguisher -Fire extinguisher cabinet -Number: 2x cabinets available -Price: per piece -Dimensions: 350/250/H930 mm -Weight: 11.3 kg

Clamping angle for workpiece clamping -Dimensions: W/H/L 355/345/550 mm -Thickness: 33 mm -Long hole: 34 x 350 mm -Surface: milled -Weight: 74 kg

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

1 Continuous Block Caster Mfc.: Fata Hunter Built: 1999 Capacity: 9 T/h Block size: 350-480 x 26 mm – W x T Flat bed / solidify length: 1.3 m

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3510/H950 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T slot: 18 mm -with: detachable stop -Weight: 2600 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 1320 mm -Length: 3530 mm -Height: 830 mm -Plate thickness: 75 mm -Plate: with support ribs -Groove width: 23 mm -Weight: approx. 3500 kg