linde h 35 used for sale

with 3 Bitzer compressors Make: BITZER Type: 6H-25.2Y Displacement: 133.3 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Composite system with 1 Bitzer compressor Make: BITZER Type: 4G-20.2-40P Displacement: 102.1 m³/h with 1 Bitzer compressor Make: BITZER Type: 4GE-23Y-40P Displacement: 102 m³/h and with 1 Green Point compressor Make: Green Point Type: 4G-20.2Y-40P Displacement: 101 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Fieldbus gateway, Canopen Fieldbus gateway: for EnDat encoders -Output signal: CANopen, DeviceNet or PROFIBUS DP protocol -to connect: from encoder to fieldbus -Signal converter: for encoders of the 600 series with EnDat interface -Protection class: IP 65 -Dimensions: 90/145/H30 mm -Weight: 0.38 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, drawbar complete with drive from electric hand pallet truck -Drive motor: Type T 12 24 V -Sale/Price: complete -Dimensions: 1200/440/H290 mm -Weight: 46 kg

Control, control unit, interface, drive control, drive current control, circuit board -Manufacturer: Linde, control unit from electric hand pallet truck -Type: 3603605020 -Mat no.: 5210175 -Number: 1x control unit available -Price per piece -Dimensions: 130/100/H45 mm -Weight: 0.1 kg/pc.

Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg

pressure: 40 t distance between columns: 450 mm stroke: 20-50 mm ram - range of adjustment: 60 mm table surface area: 370x400 mm ram surface: 250x370 mm hole in the table: 120x280 mm table height: 850 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: BxTxH 1600x1300x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg

Control panel, control unit, steering, steering unit -Manufacturer: Linde, steering unit control unit from electric tractor P 250 -Individual components: see photos -Transport dimensions: 630/470/H355 mm -Weight: 16.6 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, tiller complete with drive from electric high-lift truck L 12 -Drive motor: Type T 12 24 V -Submission/Price: complete -Transport dimensions: 1200/440/H270 mm -Weight: 44 kg

Chassis, electric motor, DC motor, traction motor, drive motor order picking forklift, drive wheel electric pallet truck -Manufacturer: Linde, chassis from electric forklift R20 -Type: R20 2503 -Wheel mount: bolt circle Ø 115 mm M14 -Individual components: see photos -Dimensions: 560/460/220 mm -Weight: 36 kg

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - /

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - / Contact us at -

Laboratory mixers, used Volume : 4 ltr. Drive : 1.5 KW --> with infinitely variable speed --> with control cabinet CE declaration of conformity possible

Laboratory mixers, used Volume : 4 ltr. Material : Areas in contact with the product in stainless steel Drive : 1.5 KW

Scrap shears and a package compactor = machines are from the 1960s Find more here - /

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Linde, Type: H 30/Diesel, Year: 1991, Drive type: Diesei, Lift mast type: Triplex, Total hight mm: ca., Fork length in mm: 1370, Lifting power kg: 3000, Lifting hight approx. mm: ca.3250, FREE TEXT: Vollgummibereifung 4-fach vorne hinten normal/verbreiterte Gabelaufnahme 1720 mm, Year :1991

Manufacturer: Linde, Type: E 30-02, Year: 2004, Drive type: elektro, Lift mast type: Duplex, Total hight mm: 2300, Fork length in mm: 1300, Operating hours: 5463,5, Lifting power kg: 3000, Lifting hight approx. mm: 3640, FREE TEXT: Kabine/Joystick steuerung/Sitzheizung/Heizung/Gabelverbreiterng/Ladegerät/Verfügbark eit, Year :2004

Linde Cryoflex CTFA4-60 Cryogenic Freezer Serial: 3002097/2 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Specifications: Nominal load capacity (max.) 6,000 kg Nominal tensile force (max.) 1,200 kg Travel speed (empty run) 10 km/h Travel speed (payload) 6 km/h Ground clearance 50 mm Wheelbase 1,032 mm Equipment/accessories: Tugger train Double U-Frame for 2x driving frames 1,200 x 1,000 mm Lift Monitoring Electric for Tractors and Trailers Trolleyhandling Trolleymover Other accessories for various chassis

- Battery: 24 V - Nominal load capacity: 1400 kg - With initial lift - Fork length: 1200mm - Service: overhauled, battery change in March 2025. - In good condition

carrying capacity: 1300 Battery Towing Tractor unused, only 1 working hour Electric powered, pedestrian controlled tow tractor for towing wheeled loads up to 1300 kg in weight Technical Details Drive Electric Tires Pneumatic Battery 24V/50Ah Service Weight 98 kg Service Brake Electric Motor 0,4 kW Drive Motor kW Driving Speed With / Without Load 4 / 4,5 km/h km/h Built-in Charger 24V5A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

Load capacity: 1600kg, lifting height: 4000mm, free lift: 1500mm, overall height: 1970mm, turning radius: 1505mm, travel speed: 16km/h, lifting speed: 0.6m/s, lowering: 0.58m/s, tires: superelastic, fork length: 1200mm, drive: electric, weight: approx. 3300kg, operating hours: 9052h. Documentation available. On-site inspection is possible.

-Lifting capacity: 1,400 kg -Mast: Triplex (lifting height approx. 4,650 mm) -Height: 2,840 mm -Drive: Electric, 24 V / 625 Ah (battery year of construction: 2017) -Attachment: Sideshift -Tyres: Solid rubber, good condition -Operating hours: 855 h-Condition: technically very good, medium signs of wear, UVV-inspected, ready for immediate use

Load capacity: at 500 mm center of gravity distance 3000 kg Stroke: 3250 mm Fork length: 1200 mm Weight: 4480 kg Space requirement: 2350 x 1300 x 2175 mm

stroke: 5 m Number of working hours: 18800 h : 55 % weight of the machine ca.: 4,84 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3000 kg speed: max. 10.0 km/h Number of working hours: 10.015 h weight of the machine ca.: ca. 1000 kg Tugs were used by BOSCH (DE) Battery was boosted” in 04/2024 Maneuver and transport agilely and safely in narrow aisles The P30 electric tractor and platform truck from Linde Material Handling is suitable for flexible and safe transport processes on small and medium-sized businesses Distances – even and especially when there is little space available. The Vehicle has precise and self-centering power steering that the driver safely controlled with an ergonomic two-handed handle. Also relieved The compact design of the P30 allows you to maneuver in narrow aisles. The powerful three-phase motor accelerates quickly to the maximum Speed. Ensure a comfortable and secure stand while driving the adjustable backrest and the fully suspended standing platform non-slip floor cove ...

2 Linde lifting forklift trucks, height up to 2 m with hand fork movement Lifting height up to 2 m high For pallet with manual stabilization

4 Linde pallet trucks with Driver's Seat Cab Driver's seat steering wheel 90° from the fork facing away from the direction of travel Transport of 1 loaded pallet

A modular narrow-aisle combination forklift Linde is available. Load capacity: 1100kg, load center: 600mm, wheelbase: 1730mm, lift height: 7200mm, overall height: 4900mm, mast: duplex, transport width/length: 1450mm/3350mm, weight: approx. 8200kg, battery weight: approx. 1600kg, operating hours: 1236h. Documentation available. An on-site inspection is possible.

Used tow tractor of the brand Linde, type P30C. 2013 Year of manufacture, nominal load capacity 3000 kg Condition GOOD At the moment, the vehicle is not ready to drive because the battery is empty. I also offer 4x transport trolley Cargo-Liner in another advertisement.

Towing capacity: 6000kg, platform load capacity: 150kg, rated tractive force: 1200N, max. tractive force: 6500N, travel speed with/without load: 20km/h/12km/h, axle load front/rear: 550kg/860kg, wheelbase: 1190mm, track width: 860mm, turning radius: 1650mm, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2100mm, weight: approx. 1800kg. Including 4 trailers. Documentation available. An on-site inspection is possible.

weight max. in kg: 3000 kg fork length: 1600 mm stroke height: 3250 mm weight of the machine ca.: 3,48 t dimensions of the machine ca.: m CE signed: Machine still in the delivery factory: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width: 1,400 mm, Height: 1,120 mm, Length: 2,450 mm, Package cross-section: 300 x 300 mm, Drive power: 2 x 90 kW, Working pressure: 290 bar, Max. working pressure: 300 bar, Year of construction: 1986, Weight: approx. 50 t

weight max. in kg: 3000 kg serial number: H2X393B03409 Number of working hours: 12550 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1400 kg stroke: 5675 mm fork length: 1150 mm Number of working hours: h weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,55 x 1,2 x 2,57 m Reach truck including charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

Nominal load 1200 kg Running time 10287 h

Electric forklifts, electric forklifts, electric forklifts -Manufacturer: Linde, electric forklift truck type E20 -Load capacity: 2000 kg -Lifting height: 3800 mm -Tine length: 1250 mm, cross section 125 x 45 mm -Operating hours: 10270 h -Battery: Type 4 PzS 620K 80V -Accessories: including charger Varta 80 V / 125 A see photos -Dimension: 555/520/H690 mm / 162 kg -Dimensions of the stacker: 2030/1150/H2300 mm / with mast height 2500 mm -Weight: 2890 kg

Incremental encoder with solid shaft, absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, rotary pulse encoder, tachogenerator, incremental encoder -Manufacturer: Leine & Linde, incremental encoder -Type: 63062 -Shaft: Ø 6 x 12 mm -Dimensions: 75/58/H72 mm -Weight: 0.2 kg