linde h 35 used for sale

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis CLOOS QIROX QRC-350-E was manufactured in 2020. It features a maximum reach of 1550 mm and a payload capacity of 6 kN, making it suitable for various robotic welding applications. The system includes a welding positioner and a laser system for enhanced functionality. If you are looking to get high-quality robotic welding capabilities, consider the CLOOS QIROX QRC-350-E automation system we have for sale. Contact us for further details.

Manufacturer : REHM Thermal Systems Model: VXS air 3500 (Type 734) Type: Convection Reflow Soldering Oven Quantity available: 2 units Operating hours : 2,500 hours Condition: Used Key Specifications - Heating zones: 7 pre-heating zones / 3 peak zones / 4 cooling zones - Fan control: 1x top heating fan regulation - PCB width: 55 to 460 mm (with centre support from 65 mm), optional 508 mm - Chain pins: nickel-plated, 5 mm bolt length standard - Transport system width adjustment: manual (electric touchpad operation) - Heating: top and bottom heating - Display: flat screen and three-colour signal lamp - Control system: industrial PC with Ethernet network interface - Software: Vicon with Windows 10 Enterprise LTSC - Certification: CE compliant - Standby mode: Yes Find more here - .ucymachines/ Contact us at - sales@ucymachines

8 Pieces Diesel Power Generator Engine Type: Caterpillar 3516 Power: 1825 kVA each Year: 2011 2024/2025 newly built and tested machine sets, no operating hours after that! Cooling: Water with radiator cooler Speed: 1500 1/min Generator: Caterpillar SR5 Voltage: 400/231 V, 50 Hz With EMCP 3.2 controller Subject to prior sale - errors possible! Internal reference number: E-1004-110

Manufacturer: KraussMaffei Model: KM 350-2700 C2 Year of Manufacture: 1998 Type of Machine : Injection Moulding Machine Machine Weight: 16,000 kg CE Certified: Yes Find more here - .ucymachines/ Contact us at - sales@ucymachines

Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

CONTROLS   CNC controls MOULD CLAMPING UNIT   locking force: 350 to   die opening stroke max.: 350 mm EJECTOR (TABLE EJECTOR)   stroke: 150 mm INJECTION UNIT   stroke of screw: 80 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3700 mm   space requirements -front/back-: 1300 mm   total height: 2100 mm   total weight approx.: 2300 kg Features: - Includes pellet dryer: Labotek DDM 60 ALB 3 units available

This 4-axis +GF+ AgieCharmilles FO 350SP die-sinking EDM machine was manufactured in 2013. It features a stable EDM generator, a fully operational 360° C-axis with a rotational speed of 100 rpm, and a substantial work area of 800 × 550 × 370 mm. Well-maintained and operational until its last day, consider the opportunity to buy this +GF+ AgieCharmilles FO 350SP die-sinking EDM machine. Contact us for more information about this machine.

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - .ucymachines/ Contact us at - sales@ucymachines

Puller Cloths 3550x580mm NEWProductor Dimensions : W: 3550mm D: 580mm7 EyeletsWe have various large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase an exchange or return is excluded it is only for tradespeople.

Puller Cloths 3500x560mm NEWProductor Dimensions : W: 3500mm D: 560mm7 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded, it is only for tradespeople.

Professional rolling pin, rolling pin, dough roll 35cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 35 cm• Total length: 62 cmDetails see pictures

Dough roller corrugated woodâ€" Rolling pin - rolling pin with wooden handles 350 mm( 2 pieces )Solid beech wood heavy-duty professional qualityRoller width: 350 mmDiameter: 90 mmWeight: 1840 gWith smooth-running stainless steel ball bearingsDetails see picture

Baking gloves 2Â pair up to 200ËšC- max. 350ËšCProfessional gloves for the bakerBaking gloves made of plush handlesOperating temperature 200ËšC -max. 350ËšC (short-term)Weight 348g325x150mm, short cuffDetails see picture

Shovel Aluminium ALU Weighing scoop Flour scoop 350 mm ( 2 pieces )Aluminium die-cast polishedTotal length approx. 350 mm800mlWeight approx. 334 gATTENTION: Aluminium is not dishwasher safe! Details see picture

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

ITEM NO.: EM354-VA-WA - Flow rate 7 500 / 15 000 ltr./h - Speed 350 / 700 min-1 - Stainless steel housing - Connections suction side Garolla NW 120 - Connections can be customized on request - Pressure spout NW 65 - with new stator - 1 year functional warranty

Inv. Num. : 9039 Type: QIROX QRC 350 Producer: CLOOS Created: 2017 Parameters: Control System: V6-9 Advanced Maximum arm reach: 3400 mm Maximum load capacity: 15 kg The workstation consists of 3 stations and the following components: CLOOS QIROX QRC 350 robot Track Optical barrier Workpiece Positioner

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 350 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 580 mm -Total length extended: 930 mm -End position cushioning: adjustable on both sides -Number: 2x available -Price: per piece -Dimensions: 52/H580 mm -Weight: 4.3 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -with adjustable baffle -2x laterally movable arms extendable 600 mm to center the material to be conveyed -Roll width: 920 mm -Conveying length: 3500 mm -Diameter roller: 85 mm -Center distance: 150 mm -Height: mm -driven: via gearbox -Geared motor: kW -Speed: m/min -Dimensions: 3700/1280/H1020 mm -Weight: 820 kg

PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module, function module, central module -Manufacturer: Siemens, Simatic S7 function module FM 353 Stepper Motor Ovp -Type: 6ES7 353-1AHO1-OAEO -Number: 1x module available -Price per piece -Cardboard dimensions: 150/130/H85 mm -Weight: 0.6 kg/pc.

Refrigeration Compressor, Chiller, Refrigeration Compressor, Refrigeration Unit, Refrigeration Compressor, Compressor, Filter Dryer Housing, Filter Dryer, Compressor Protector -Manufacturer: Alco, Compressor Protector, unused original packaging -Type: ASD 35S5-VV -Pressure: up to 500 PSIG / 31 bar -Dimensions: Ø 93 x 180 mm -Weight: 1 kg

Single-phase isolation transformer, isolating transformer, solid rubber distributor -Manufacturer: Gifas, isolating transformer solid rubber distributor -Type: 35T2KVA01ETAESB11103 -Primary/Secondary: 230V 50-60Hz -Power: 2.0kVA -Protection class: IP 54 -Number: 2x transformer available -Price per piece -Dimension.: 360/360/H250 mm -Weight: 26 kg/pc.

Safety relay, safety control unit, undervoltage relay, switching device, servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter, control module, safety controller -Manufacturer: Reis Robotics, Safety Controller -Type: SCR2 -Identification number: 3522448 -Operating voltage: 24 VDC -Number: 2x safety controllers available Price: per piece -Dimensions: 385/210/H80 mm -Weight: 2.1 kg/pc.

Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, centrifugal fan -Manufacturer: Alko-Therm, centrifugal fan type RZR 11-355 -Motor: Siemens 0.9/3 kW -Speed: 980/1450 rpm -Connection input: Ø 300 mm -Connection output: 460 x 300 mm -Dimensions: 1200/640/H670 mm -Weight: 89 kg

Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, radial fan, medium-pressure fan -Manufacturer: Karl Klein, medium-pressure fan type DMV 350 -Motor: away 1.1 kW/ 2765 rpm Voltage: 380 volts -Volume flow: 1260 m³/h -Pressure: 2380 Pa -Connection input: Ø 150 mm -Connection output: 60 x 100 mm -Quantity: 1x piece available -Transport dimensions: 500/485H340 mm -Weight: 30 kg/piece

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side rail set -Type: 7607/350/2S-RER-SET/9006/1 -Item no.: 45859-01 -Length 350 mm -Quantity: 7x set available -Price: per set / minimum order 2 sets -Transport dimensions: 350/100/H40 mm -Weight: 0.3 kg/set

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

Rotary union, rotary union, rotary distributor, rotor-borne rotary union -Condition: the rotary union is unused -Design: Brass housing and stainless steel rotor -External thread: 1 inch left -Internal thread: 1 inch -Passage: Ø 22 mm -Number: 2x rotary unions available -Price: piece -Dimensions: 83/83/H160 mm -Weight: 3 kg

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley -Type: 350 -Outer pulley diameter: 346 mm -Mounting: Ø38 x 195 mm -Dimensions: Ø346 x 195 mm -Weight: 13.5 kg

Flat gear motor, gearbox, spur gear, angle gear, worm gear, Movigear, flat gear, flat gear -Gearbox: Parallel shaft gear box, without type designation SEW EURODRIVE Parallel shaft gear motor series F..DR.. -Drive: without electric motor -Part No.: 06420249/03M17 GH 3 250613 -Translation: i= 38 -Hollow shaft: Ø 90 mm -Recess for motor: Ø 250 mm -Bolt circle for engine: Ø 300 mm -Dimensions: 720/350/460 mm -Weight: 226 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower for air conditioning -Type: l2HO2294D AMR075E1 -Voltage: 220-240 V -Fan wheel: Ø 350/215 mm -Total dimensions: Ø 350 x 370 mm -Weight: 5.0 kg

Rope protection cage, for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope multi-shell grapple, polyp grapple, mechanical multi-shell grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple -Rope protection cage: intermediate size 590 mm -Art.No.: 1031 4142 -Type: ETL915-35b P.04 MCranes -Number: 2x rope protection basket available -Price: per piece -Dimensions total: 685/345/H350 mm -Weight: 25 kg/piece

Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø810 x 200 mm -Dimensions total: 1220/785/H1500 mm -Weight: 396 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/40 -Elbe Art.No.: 9.990.000.0354 -Flange Ø 90 mm -Bolt circle: Ø 75 x 8 mm -Quantity: 10x cardan shafts available -Price: per piece -Dimensions: Ø 90 x 400 mm -Weight: 5.1 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available - Price: per piece -Dimensions: Ø 75 x 360 mm -Weight: 2.8 kg/pc.

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Pneumatic cylinders -Stroke travel: 350 mm -Piston diameter: 80 mm -Piston rod: 20 mm -Connection: 16 x 1.5 mm -Total length when retracted: 480 mm -Total length extended: 830 mm -Air inlet and outlet: adjustable -Quantity: 7 pieces available

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table -Model: AWH 355 -can be opened on one side -without hydraulic unit -with hydraulic valves -without control -controlled via cam switches -supported by clamping brackets for heavy machining -Clamping surface: Ø 350 mm -Peak height: 350 mm -braked: hydraulically -driven: hydraulically -Hydraulic motor speed: 10-1500 rpm -Swallowing volume: 20 cm³/rev -Dimensions: 680/360/H620 mm -Empty weight: 290 kg

The Dorst TPA 350 is a robust used powder compaction press, offering a maximum pressing force of 3500 kN. It is designed to handle demanding applications with efficiency, providing a maximum withdrawal force of 2500 kN and supporting force in pressing position up to 2000 kN. The die return force reaches a maximum of 80 kN. It features an upper punch stroke of 220 mm, with an adjusting travel of 200 mm, ensuring precision in operations. This press operates at a rate of 5-18 strokes per minute, catering to various production speeds. It accommodates a maximum filling height of 180 mm and allows a pressing travel and withdrawal travel both up to 90 mm. The top pressing travel is capped at 18 mm, with an upper punch pneumatic preload maximum of 60 mm, demonstrating versatility in its functioning. It operates with a compressed air supply consuming approximately 140 l/min, backed by a total con ...

• Non-EX version • For coating and coating tablets using the film coating process • Drum fully perforated with mixing paddles Smooth SU 4.12, hole diam. 3 mm • Drum material AISI 316L • Drum usable volume 331 litres, drum Ø 1. 450 mm, opening diam. 550 mm • Batch size 79-265 kg (filling volume 30-100%, density 0.8 kg/dm3) • Spray nozzle Glatt GCSD 3.1 with multi-head peristaltic spray pump with pump trolley • Filling chute • SmartScoop discharge with discharge hopper • Supply air system Glatt M6/F9 with temperature and volume flow measurement • Supply air fan • Supply air filter 3. H13 • measuring device for DEHS filter test • Frost protection heating (steam) • Dehumidification 32°C/40% rH, independently controlled • Humidification with preheater • Electric pure steam generator Defensor Mk5 • Bypass shut-off damper during sugar coating • Exhaust air ...

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Key data: 900 KW

Make: Caterpillar Model: 3516E Mfg year: 2021 Condition: Unused Serial Number: ND900120 Arrangement Number: 5593393 Power: 900 kW Located in the USA

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor