137,506 used machines on RESALE, but how to find them? Machine Search
Pressure: 13 bar Motor: 7,5 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,87 m³/min Measurement (WxHxD): 1835 x 1645 x 955 Weight: 425 kg Compressed air connection: 1/2
Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,03 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 260 kg Compressed air connection: 1
Pressure: 15 bar Motor: 3,2 kW Free air delivery: 0,297 m³/min Measurement (WxHxD): 775 x 520 x 510 Weight: 70 kg Compressed air connection: 3/4
Pressure: 10 bar Motor: 4,4 kW Free air delivery: 0,52 m³/min Measurement (WxHxD): 1895 x 1280 x 720 Weight: 290 kg Compressed air connection: 1/2
Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2
Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2
Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2
A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.
Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.
Stock# U2461 Used stainless steel planetary mixer by Grieser (DE) model VPL 350. Mixer has two spiral agitators and one side wall scrapper. Agitators are belt driven by el motor 15 kW, 1460 rpm, 400 V, 50 Hz and planetary gearbox. Rising and lowering of agitators by hydraulic device. Mixer is equipped with 9 mobile stainless steel mixing pans. Each pan has internal diameter 695 mm x 500 mm depth, total volume 365 l, working about 350 l. Two mixing pans have bottom outlets with manually operated valves. There is also included mechanical rising and tilting device for discharging pans. Mixer has local control panel and el. cabinet. Technical documentation - general manual and el. schemes available in digital form. Machine currently dismantled. Last time used in food production.
2000/2200 KVA at 50 Hz, 2500/2750 KVA at 60 Hz, Power (KVA): 2500, Working hours: 46, Frequency: 60 Hz, Voltage: 3300 V
power capacity: 4 kW feed pressure: 10 bar liter capacity: 490 Lieter / min Receiver capacity: 350 l motor speed: 1500 U/min voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m • 2 piston-compressor with tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with
MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-
Control: Cybelec DNC 600S. Inspection by appointment possible.
Mitre cold circular saw BERG & SCHMID type MKS 350Year of construction approx. 1980Saw range at 90 Around 110 mmSaw area at 90 Rectangle 160 x 90 mmSaw area at 90 Square 95 x 95 mmSaw area at 45 Round 95 mmSaw area at 45 Rectangle 120 x 90 mmSaw area at 45 Square 80 x 80 mmSaw blade diameter max. 350 mmSaw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchableMains connection 380 volts, 50 Hz- motor with 2 electrically switchable speeds- infinitely variable
Belt width 350 mm Number of straightening rollers - 11 pcs Diameter 60 mm Capacity 350 x 2.5 mm Motor 4 kW Speed adjustable by variator drive
Key data: 1257 KW, 1580 kVA, 400 V
Caterpillar 3512-B STD Serial No.: 8EM00341 1257KW 1580 kva stamford 400volt 50hz & 60hz possible scope: genset on frame and alternator control panel small accessories
Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck
ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...
Height=1.87 m, Overall length= 0.8 m, Overall width= 2.95 m, Net weight= 525 kg,
Height=1.32 m, Overall length= 0.75 m, Overall width= 1.7 m, Net weight= 155 kg,
Height=1.1 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 134 kg,
Height=1.21 m, Overall length= 0.78 m, Overall width= 1 m, Net weight= 150 kg,
Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 257 kg,
Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 257 kg,
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 x 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 125 x 95 mm capacity 60 degrees: round: 90.0 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: flat: 90 x 90 mm 0: 15 / 30 / 45 / 90 U/min total power requirement: 1.8 / 2.5 kW weight of the machine ca.: 375 kg range L-W-H: 1000 x 1100 x 1870 mm Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The larg ...
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The ...
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm links capacity 45 degrees: round: 75 mm rechts 0: 30 / 60 U/min. dimensions of saw-blade: 350 x 32 mm weight of the machine ca.: 220 kg Furnishing: - Robust cast iron structure - Gear with bronze wheel and ground / hardened - Steel screw in a special oil bath - Vice with counter-clamping device for - double workpiece clamping - Electric coolant pump for cooling and lubrication of the saw blade Scope of delivery: - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded views - Crane eyes for transport The machine is delivered without a saw blade Special accessories included: - Base cabinet with door (steel frame) The data for this ad was cr ...
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 / 110 mm capacity 45 degrees: square: 100x100 / 95x95 mm capacity 45 degrees: flat: 135 x 60 mm turning speeds: 1700 / 3400 U/min Control: MEP CNC total power requirement: 2.6 / 3.5 kW weight of the machine ca.: 605 kg range L-W-H: 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw For cuts from 45° right to 45° left In aluminum and light metal alloys - MEP microprocessor control Simple user interface with display and mechanical buttons Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Pneumatic clamping system allow ...
A robot automation cell WU Mechanische Werkstätte with a Fanuc robot for product handling for a lathe is available. Gripper system: double gripper, gripper manufacturer: Schunk, robot type: Fanuc M20iA 35M, robot axes: 6, max. payload: 35kg, robot reach: 1810mm, machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm, weight: approx. 2000kg. Lathe power-on time: approx. 34000h, servo-on time (cell): 5700h, mechanical operating hours: 615h. This is only the automation. Documentation available. An on-site inspection is possible.
PE-storage tank with centrifugal pump and UV-unit for germinating fresh water.
Flow rate: 143 m³/h Operating pressure test: 32 bar Motor: 11 kW - With connections: suction side DN 65 and pressure side: DN 80 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1020 mm Width: 520 mm Height: 1100 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.
10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, ef ...
3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...
A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...
Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling
Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 257 kg,
A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible.
formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50
Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price
Travel X/Y/Z: 2000mm/610mm/630mm, tool holder: SK40, spindle speed: 9000rpm, tool stations: 40, rapid traverse: 60m/min, table dimensions X/Y: 2100mm/720mm, max. table load: 1000kg. Control: Siemens Sinumerik 840D, operating hours: 18272h. Including conveyor and coolant system. Documentation available. An on-site inspection is possible.
Clamping Force: 350 ton // Shot Weight (Max): 694 g
maximum number of results exceeded
please refine your search
