138,006 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 14000; Engine: Caterpillar 3512; Accessories: Control Panel, Including: Coolant heater 9kW
Key data: 2250 KW, 2812 kVA
This genset was purchased for a project, but never used. Manufactured 10/2022 - It is in new condition. Genset 2022 CATERPILLAR 2250KW 3516C GENSET ASCO 4000 AMP Automatic Transfer Switch Genset Drop Over Enclosure Containment Solutions Gen Cube 3500 Gallon Fuel Tank SCR Support Equipment and Controls Container Submittals. Factory Tests Reports, O&M Manuals, Owners Manuals
METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...
Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T
engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1.300 – 1.800 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sheeter for foil / sleeve Manufacturer: Sandmann Working range width = 16 -350 mm, Length = 10 -1000 mm, Speed up to 50 m/min
saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Jasa 350 vertical bagging machine, The Jasa 350FV is a versatile, capable and reliable vertical packaging machine, Robust design, ideal for medium to large production volumes., Specifications, - Maximum Speed: 35 to 40 packages per minute, depending on the product and film settings., - Wrapping Film: Suitable for various types of films, such as PP, with the option for both barrier films and regular films., - Dimensions: The machine has a compact design, but the exact dimensions may vary depending on the specific configuration., - Cutting Mechanism: Automatic cutting mechanisms for precise sealing of the packages., - Settings: Digital settings for speed, temperature, and product configurations., - Temperature Control: To ensure optimal sealing, the temperature of the film machine is automatically regulated, providing reliable packaging., - Packaging Size: Various formats supplied from sto ...
Brazing line manufactured in 2018. This SCAME BRAZING LINE 50-20-350-GI-DR features a maximum temperature of 1150 °C and operates with an electric power source of 85 kW. The continuous longitudinal conveyor system efficiently moves parts along a passage chamber measuring 50 x 20 x 350 cm. If you are looking to get high-quality brazing capabilities, consider the SCAME BRAZING LINE 50-20-350-GI-DR machine we have for sale. Contact us for further details.
: rechts Ausklink / links S fence: elektronisch ja /nein foot pedal: mechanisch weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 3500 mm width: 1000 mm depth: 1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting ...
dimensions of saw-blade: 350 x 32 x 3,4 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 1,5/2,2 kw weight: 280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 x 32 x 2,5 mm 2 speeds: 30/60 UpM vice: 130 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 130x80 mm : 100 mm : 85 mm : 90x80 mm : 75 mm : 75 mm : 90x65 mm total power requirement: 1,1/2,2 kW weight: 220 kg Equipment: - including machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 375 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,22 t dimensions: 0,7 x 0,9 x 1,9 m ATTENTION: SPECIAL PRICE! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with ...
saw blade diameter: 350 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 100 x 195 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 100 x 135 mm saw blade turning speeds: 2800 U/min total power requirement: 1,5 kW weight of the machine ca.: 250 kg dimensions: 0,7 x 0,7 x 1,4 m ATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 3500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V/280AH Li-ion weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,94 x 1,23 x 2,25 m New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic include : - PC - Screen : upgrde to 22 - Backlight : upgrade to vertica ...
volume capacity: Filter 3200 connected load: 400 kVA weight of the machine ca.: 300 kg dimensions of the machine ca.: 1 x 1 x 2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 350 mm roll length: 700 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 22 kW Condition: used, overhauled Specification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers - roller diameter: 350 mm - roller length: 700 mm - Rollers: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tilting guide plates made of steel - New roller container, made of stainless steel, for holding mixture - bi-directional bars - two safety brakes for NOT stop - AC motor: 22 KW - 400 Volt - 50 Hz - New frequency converter system for va ...
Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm
Good day We offer a New 3500KVA ABB Transformer 20KV-400V
Metal Detector for food and other (e.g. medical, chemical, textile) products, stainless steel framework, touch screen, self-learning system. - Specifications: weight of the product: max. 5kg | detecting speed: 0.2-0.8m/sec | detecting accuracy: FE from ? 1.0mm, SUS from ? 2.2mm | tunnel size WxH: 350x175mm | max. passing size WxH: 300x135mm | power: 220V/0.3kW, 50Hz/60Hz, dimensions and weight: L1545xW1114xH1383mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm | length of sealing blades: horizontal = 703mm, ...
Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35XL. That system includes: Shrink Wrapper speed shrink 35XL (vertical), SHRINKtunnel-POF-XL (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: XL-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 800mm provided that H < 180mm and (W + H) max. 650mm provided that H < 180mm | max. length of sealing blades: horizontal ...
M-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-M (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) = 500mm provided that H < 180mm and (W + H) = 400mm provided that H < 180mm | length of sealing blades: horizontal = 623mm, vertical = 550mm | power: 220V/2.8kW | machine dimensions: L1850xW1350xH1300mm | weight: 800kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - U ...
L-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-L (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute | packing sizes: (L + H) = 600mm provided that H < 180mm and (W + H) = 500mm provided that H < 180mm | length of sealing blades: horizontal = 703mm, vertical = 550mm | power: 220V/3.2kW | machine dimensions: L2015xW1470xH1300mm | weight: 850kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task ...
XL-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XL (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute | packing sizes: (L + H) = 800mm provided that H < 180mm and (W + H) = 650mm provided that H < 180mm | length of sealing blades: horizontal = 903mm, vertical = 750mm | power: 220V/3.5kW | machine dimensions: L2430xW1550xH1300mm | weight: 930kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging ta ...
Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm | length of sealing blades: horizontal = 623mm, ...
Key data: 3500 , 70
SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg
Key data: 350 mm, 45 °
For sale is a professional metal cold circular saw / Miter Saw from the quality brand Pedrazzoli (type Super Brown 350/60 SA, built in 1999). Perfect for locksmithing, steel construction or tube processing. Technical data (according to nameplate & model): Manufacturer: Pedrazzoli IBP SpA (Italy) Model: SB 350/60 SA (Semi-Automatica) Year of Make: 1999 Saw blade diameter: max. 350 mm Mitre cuts: Swivelling saw head for angle cuts Equipment: Pneumatically controlled vice, pneumatic lowering cylinder for saw head, separate control panel with emergency stop & timer module as well as integrated coolant device / maintenance unit. Condition & Note: Solid base with base and drip tray. Normal signs of wear and aging from workshop use. Cabling/hoses should be professionally inspected/sorted before commissioning.
Key data: 350 mm
Device details: Manufacturer: MEP S.p.A. (Pergola, Italy) Model: TIGER 350 SX Year of manufacture: 2002 (according to nameplate) Serial Number: 135609/27N Motor: 2-stage motor with 1.84 kW / 2.6 kW (1425–1710 rpm) Sales label: Lackner & Urnitsch (precision machines and tools, Graz / Wr. Neudorf) Specifications & Features: Saw blade diameter: 350 mm Cutting range: Suitable for miter cuts (swivel head) and cutting solid material, tubes and profiles made of steel or non-ferrous metals. How it works: Semi-automatic (pneumatic workpiece clamping and pneumatic/hydraulically controlled saw feed via the vertical cylinder). Control: Integrated control unit HEAD POSITIONING SYSTEM from MEP Electronic with emergency stop, operating mode selector switch, stroke limitation and speed levels.
maximum number of results exceeded
please refine your search
