linde h 35 used for sale

Number of motors: 1 Stück 0: 2500 mm Control: nein Single-sided glazing bead saw Hecht ES 300 A -------------------------------------- swivels from 45° to 45° to fixed stop with automatic feed pneumatic swivel over manual swivel stop with machine base, pneumatic tension Saw blade HM 300 x 3.0/2.2/30 Z 80 Neg. Touch stroke 1.5 m Support 1.5 m with support Key stroke 3 m Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2500 mm (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 107 rpm -Power: 0.75 kW -Construction: B5 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Brake: 380 V -Number: 1x motors available -Price: per piece -Dimensions: 490/240/H220 mm -Weight: 24 kg

Gear motor, electric motor -Speed: 140 rpm -Power: 0.37kw -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: -Number: 1x gear motor available -Dimensions: 360/160/H235 mm -Weight: 12kg

Inv. Num. : 7688 Type: 203 F2 Producer: HITACHI Generated: 2000 Parameters: Control System: MARK-10W Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 170 mm Feed length in U-axis (-): 20 mm Feed length in the V-axis ( -): 20 mm Maximum wire thickness: 0.25 mm Dielectric container capacity: 160 l Max. workpiece dimensions: 450 x 350 x 170 mm Max. workpiece weight: 200 kg Machine height: 1880 mm Machine length: 1525 mm Machine width: 1810 mm Machine weight: 1500 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

Gear motor, electric motor, electric gear motor -Speed: 25 rpm -Power: 1.1 kW -Construction: B3 angle -Diameter shaft: 32 mm -Protection class: -Number: 1x motors available -Dimensions: 600/410/H410 mm -Weight: 97 kg

Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V -Dimensions: 1000/550/H1200 mm -Weight: 120 kg

Sturtz welding and cleaning line Left-to-right direction SE-HSM-30/26 Compact 0.2mm 3000x2600mm P-260-WST 4AS-JC WST 25

Gear motor, electric motor -Speed: 211 rpm -Power: 0.25 kW -Construction: B5 -Diameter hollow shaft: Ø 22 mm -IP protection -Dimensions: 335/140/H190 mm -Weight: 9 kg

Electric motor, three-phase motor -Motor: unused -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Number: 27x motors available -Price: per piece -Dimensions: 450/340/H299 mm -Weight: 44 kg

Capacity: 1000 bottles/hour Bottles: 0.33 - 0.7 L Power connection / installed power 230/50Hz / 0.12 kW Air pressure: 6 bar

Folding machine good condition, ready for immediate use. For details, please refer to the nameplate

Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise

Web width 850mm Print repeat range 250-520 Reel diameter on rewinder and unwinder 600mm Core diameter 76mm Maximum mechanical speed 200m/min Electric drying Alcohol/Solvent ink system BST super Handy Scan digital 4000 web preview Electric ink pumps 10 pcs. Doctor blade chambers 10 pcs. Drip sills 10 pcs. Printing sleeves 176 pcs. Gear wheels 184 pcs. Anilox rollers 35 pcs.

Foot valve, foot pedal, 5/2 way valve, solenoid valve, hydraulic valve, oil valve, pressure valve, valve block, control block -Manufacturer: David Brown Hydraulics -Type: C9193430351 -Type: SNF05 137 -Quantity: 1x valve available -Weight: 1.1kg

Electric motor, three-phase motor with 2 speeds -Power: 0.55/0.75 kW -Speed: 945/1410 rpm -Shaft: Ø 19 mm -Brake -Construction: B5 -Protection class: IP 54 -pole changing -Dimensions: 400/200/H230 mm -Weight: 25 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 8 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 33x available -Dimensions: 265/205/H145 mm -Weight: 6 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2880 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 375/300/H250 mm -Weight: 41 kg

Stock number: 3919 CNC LATHE Manufacturer: MAZAK, Type: HQR 200 MSY Year of manufacture: 2018 Specifications: Max. circumferential diameter 344 mm dia. Turning length 860 mm Main motor power 22 kw Main spindle speed range 5000 rpm Hole through drawing tube 65 mm dia. C Axles 0.001 Both spindles Y axis upper 100mm / lower 70mm mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Powered tools. 6000 Both Turrets rpm Control Mazak Smooth Fabr. Accessories: Collet device. Heinbuch 65 both spindles Hydr. Chuck main spindle 210 mm dia Hydr. Chuck Subspindle 210 mm dia Driving angle tools 6 pieces Driving Tools Straight 5 pcs. Tool setter Charging Hydrafeed X-Tract Delivery time September 2024 Length: 4000 mm, Height: 2500 mm, Width: 2700 mm, Weight: 12500 kg

Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg

Gear motor, electric motor, electric gear motor -Speed: 60 rpm -Power: 0.45/0.55 kW -Construction: B3 angle -Diameter shaft: 24 mm hollow shaft -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 530/200/H240 mm -Weight: 31 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 3005/818/H800 mm -Height: adjustable -Plate thickness: 35 mm -Plate: with supporting ribs -7x dovetail: groove 38/48 mm -Groove length: 1820 mm -Weight: 1100 kg

Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Slab: planed -Width: 793 mm -Length: 997 mm -Height: 930 mm -Sheet thickness: 60 mm -Plate: solid -Weight: 418 kg

Three-phase motor, electric motor -Power: 0.8kw -Speed: 680 rpm -Shaft: Ø 25 mm -Construction: B3 -Protection class: -Number: 1 piece available -Dimensions: 390/248/H280 mm -Weight: 33kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Type: S9 581 RF-1/2 -Magnetic valve -Connection: 1/2 inch -Number: 1x available -Price: per piece -Weight: 0.9 kg

Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 250 mm -Piston diameter: mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available -Price: per piece -Dimensions: 560/182/H160 mm -Weight: 9.5 kg/piece

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 300 mm -Piston diameter: 100 mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Number: 2 pieces available -Piece price: 125 euros VAT. -Dimensions: 605/182/H165 mm -Weight: 10 kg

Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 160 mm -Piston diameter: 125 mm -Piston rod: 16 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available Unit price: 95 euros VAT -Dimensions: 140/140/H440 mm -Weight: 8.5 kg

Slip ring motor, slip ring rotor, three-phase motor, electric motor -Power: 30 kW -Speed: 720 rpm -Conical shaft: 70 to 59 mm -Length: 122 mm -Design: B3 -Protection rating: - -Dimensions: 1120/580/H530 mm -Weight: 558 kg

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Dimensions: 380/190/H90 mm -Connection: 230 V -Number: 11 lights available -Price: per piece -Weight: 1.9 kg/piece

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: HMC-1B 5V10A -Number: 1x control cards available -Price: per piece -Dimensions: 250/135/H60 mm -Weight: 1.3 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: H150 5V30A -Number: 1x control cards available -Price: per piece -Dimensions: 220/115/H115 mm -Weight: 2 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 295 mm -Length: 496 mm -Height: 95 mm -Plate thickness: 30 mm -with: support ribs -Weight: 30 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 180 mm -Plate thickness: 25 mm -with: support ribs -Weight: 90 kg

HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width optionally as an open 3- or 7-blade rotor Drive motor 110 kw Folding device with electric winch

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Dimensions: 5545/535/H268 mm -Sheet thickness: 60 mm -Plate: with supporting ribs -Weight: 3000 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table: comes from an injection molding machine -Make: Arburg -Type: -Dimensions table: 735 x 665 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 735/665/H185 mm -Weight: 230 kg

Bending tool, die, upper knife, upper tool, deer foot tool -Tool: for press brake -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg

Gear motor, electric motor, electric gear motor -Speed: 56 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33 -Weight: 24 kg

We are selling here a cooking system from the manufacturer Schröter, type HR1 Wg in a very good used and functional condition. Runs on 400 volts, 45 kW, built in 1999, completely stainless steel, Reich digital control, incl. 2 cars, workshop checked, immediately ready for use, dimensions W/D/H 140/130/265 cm, others on request.

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2880 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 520/330/H275 mm -Weight: 47 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 503 mm -Length: 795 mm -Height: 102 mm -Plate thickness: 20 mm -with: support ribs -Weight: 75 kg

HANGCHA Diesel Forklift Nominal load capacity 2500 kg at 500 mm LSP Triplex full free-lift frame: lifting height 4500 mm, overall height 2200 mm, free lift 1140 mm Overhead guard with cover, windscreen with wiper, fork length 1200 mm, sideshift, superelastic tyres, lighting, load protection grille, rear-view mirror, driver's seat with seat belts Xinchai Euro 5 Diesel Engine Total weight approx. 4200 kg

Three-phase motor with 2 speeds, electric motor -Power: 3/5.2 kW -Speed: 720/1450 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 510/370/H300 mm -Weight: 92 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 44 -Number: 2 electric motors available -Price: per piece -Dimensions: 450/340/H260 mm -Weight: 47 kg

Electric motor, three-phase motor -Power: 3.7 kW -Speed: 2900 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: -Price: per piece -Number: 1x available -Dimensions: 460/320/H285 -Weight: 55 kg