linde h 35 used for sale

Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg The machine is still energized. Viewing possible at any time by arrangement.

Haloila CobraX Pallet wrapper 2016, Pallet wrapper, rotating arm, wraps up to 2300mm, 1Ph

Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg

Hassia Redatron FlexiBag 40/25 vertical form, fill & seal machine for pouches with auger dosing, bag size min. 60 x 50 mm (LxW), max. 400 x 260 mm (LxW), filling volume max. 4.4 litre, max. width of the foil reel 540 mm, maximum diameter of the foil reel 600 mm, electrics 3X230/400 V/50 Hz, capacity up to 150 cycles per minute

Dry cleaner/ friction cleaner with 110 kW drive power. Throughput approx. 1 -2.5 t/h depending on type of plastic and material thickness

For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Change gear, change gears, gear -Number of teeth: 152 pieces -Module: 1.25 mm -for splined shaft: Ø 25 mm

Change gear, change gears, gear -Number of teeth: 141 pieces -Module: 1.25 mm -for splined shaft: Ø 25 mm

-Motor power: 2.2 kW -Volume flow: 6500 m3 / h -Voltage: 230/400 V -Number: 2x available -Price per piece -Dimensions: 2750/880 / H2030 mm -Weight: 354 kg

For sale is a Stamford HCI 734 FCG generator with the serial number A03C027807. This generator was coupled to a Jenbacher 320 engine with the design number B212. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 2003. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Ventilation system, comfort compact ventilation -Motor power: 2.2 kW -Volume flow: 6500 m3 / h -Voltage: 230/400 V -Dimensions: 2750/880 / H2050 mm -Weight: 346 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: - mm -Dimensions: 210/85/H225 mm -Weight: 10 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Through hole: Ø 78 mm -Weight: 30 kg

USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA

Reference Num.: 4100 Brand: Heidelberg Type: KS Cylinder 38x52 Size: 38 x 52 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 38 x 52 mm Total weight: kg 3,500 / lbs 7,716

electric magnetic plate, chuck, magnetic chuck, magnetic chuck -Clamping surface: 1000 x 255 mm -Connection: 100 volts DC -Dimensions: 1000/255/H98 mm -Weight: 140 kg

AC Spindle Servo Unit, Servo Amplifier Module, CNC Control System, plug-in card, converter device, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6055-H108 -Dimensions: 310/500/H300 mm -Weight: 35 kg

equipped with Iemca Boss 332E-r/32 barfeed new in 2008 with 12 mm guide channels - chip conveyor - Fanuc 18i-TB Control

ThermoRoll oven Heuft VTR 10.12,5.10 Thermo oil -Thermal oil ovens -Manufacturer: Karl Heuft GmbH - Type: VTR 10.12,5.10 -one oven is for 2 rack trolleys of 10 editions each -Sheet size 58x98cm -Furnaces with exhaust hood -Built in 1998

Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6058-H334 -Dimensions: 450/250/H180 mm -Weight: 9.6 kg

PLC, control panel, operator panel, control machine -The front of the control panel comes from: a Hitachi Seiki type HC400 machining center -Manufacturer: Hitachi Seiki -Control: FANUC -Dimensions: 400/310/H100 mm -Weight: 3.8 kg

semi-hermetic screw condensing units MODEL:BBLGS2-8OMY-FB(R134A) SERIAL NUMBER:BLG1509005 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:216.4kW POWER:49kW REFRIGERANT/OIL:R134A/BSE170 SIZE:28501374.6`1321.4 ATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO., LTD.

NNP High shear mixer Stainless high shear mixer, sits over a vessel with hopper to add product, shaft length 600mm, diameter of high shear head 120mm, 3Ph

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -Width: 1750 mm -Length: 1750 mm -Height: 80 mm -milled from all sides -Number: 2x plates available -Price: per piece -Weight: 2000 kg

semi-hermetic screw condensing units MODEL:BBLGS2-100MY-FB(R134A) SERIAL NUMBER:BLG1509006 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:248.4kW POWER:56kW REFRIGERANT/OIL:R134A/BSE170 SIZE:31501374.6' 1432.9 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO. LTD.

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 500 mm -Length: 500 mm -Height: 125 mm -with supporting ribs -Plate thickness: 40 mm -Weight: 66 kg

Clamping plate, welding table, welding table, straightening plate, measuring plate, measuring table -Width: 505 mm -Length: 510 mm -Height: 50 mm -Plate: Massive -Sheet thickness: 50 mm -Weight: 96 kg

T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Dimensions: 455/365/H40 mm mm -Bore: Ø mm -Dovetail groove: 17 mm -Weight: 45 kg

From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable

Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Key data: 508 mm, 406 mm, 384 mm

Machine Details Stock-No. 1105-04000 Type of machine milling machining centers - vertical Make HAAS Type DT 1 Year of manufacture 2007 Type of control CNC Storage location HAGUENAU FRANCE Country of origin USA Delivery time IMMEDIATELY Freight base EXW Technical details X-Travel 508 mm y-travel 406 mm Z-Travel 394 mm turning speeds 15000 rpm Tool Changer 18 Rapid Travel X/Y/Z 15.2 m/min total power requirement 11 kW weight of the machine approx. 2 t dimensions of the machine approx. 2 x 2 x 2 m Additional information very nice WITH MAGSIN 20 TOOLS BT 30 TABLE 660 X 281 MM

bearing diameter: 120 mm motor: Synchronmotor Nominal turning speed: 3000 1/min Maximum turning speed: 4000 1/min Torque: 76,4 Nm current: 38 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 4 kW, 4060 m³/h

arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Pressure valve, pressure gauge, pressure indicator -Measuring range: 1-25 l/min -Fixture: Digital display -Dimensions: 80/50/H110 mm -Weight: 0.8 kg

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

Ethernet switch -compact, industry-compatible switch for mounting on top hat rails -Number: 10 pieces available -Price: per piece -Dimensions: 130/125/H70 mm -Weight: 0.5 kg

Ethernet switch -Type: RS30-1602O6O6SDAEHH06.0.02 -compact, industry-compatible switch for mounting on top hat rails -Number: 4 pieces available -Price: per piece -Dimensions: 130/125/H110 mm -Weight: 0.7 kg

Vacuum filler with accessories Manufacturer: Handtmann Model: VF 616 + AL 216 - 21 Dimensions: 215x160x225cm/150x70x130cm Electric power: 6 + 2.5kW Volume: 350 liters Capacity: 3.600kg/h

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

Electric motor, three-phase motor with 2 speeds -Power: 0.3 kW -Speed: 1375 rpm -Shaft: Ø 22 mm -Construction: B3/5 -Protection class: IP 33 -Dimensions: 265/142/H163 mm -Weight: 9.5 kg

SOS Block bottom bag machine TRIUMPH I, 1 ply, 4 colours, photo cell, Tube width 3-7,5 cm, Tube length 12-34 cm, Bottom width 5-12 cm, machine ready for test production

Rack trolleys, paint drying trolleys, compartment trolleys, transport trolleys, shelf trolleys -Total length: 1190 mm -Total depth: 720 mm -Total height: 1800 mm -Weight: 66 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 1510 mm -Height: 695 mm -Surface: good -Holes: Ø 50 mm -Sheet thickness: 125 mm -bench vice -Transport dimensions: 1540/1770/H1030 mm -Weight: 1650 kg

Stepped end tuber type 951, Gartemann + Hollmann, Year 1980, 4 plies, 2 colours, photo cell, Tube width 30-65 cm, Tube length 50-121 cm, Machine mechanically and electrically mounted, we also have a 4 colour tail end printer suitable for that machine

Flat and satchel bag machine Matador 20, Windmoeller & Hoelscher, Tube width 9-20 cm, Tube length 10-32 cm, machine ready for test production

Sheet metal shelf, screw shelf, storage shelf, screw shelf -Execution: stable -Dimensions: 620/1420/H1400 mm -Own weight: 260 kg

Clamping plate, welding table, welding table, straightening plate -Width: 710 mm -Length: 1010 mm -Height: 840 mm -Surface: milled -partially with threaded holes -Sheet thickness: 65 mm -Massive -Weight: 410 kg

Clamping plate, welding table, welding table, straightening plate -Width: 745 mm -Length: 1100 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 15 mm -with supporting ribs -Weight: 140 kg