134,613 used machines on RESALE, but how to find them? Machine Search
Cold water high-pressure cleaner and hydraulic oil demand unit. Working pressure: Infinitely variable up to 320 bar. Required quantity: up to 21l /min (1,260 l/h) Pump: 3-plunger, all-ceramic Engine: 2 cylinders 4 stroke petrol engine Motor power: 16.4 kW Speed motor/pump: 3,250/1,450 rpm Pump drive: Gearbox Fuel consumption:approx. 5.5l/h Volume fuel tank: 20l Pressure outlet (water) M221,5 AG Heating capacity Olbrenner Empty Weight: 110kg Dimensions(LWH) 757999cm Article no.: 1 486 089
Key data: 2150 KW, 1200 1/min
Description of Product: Replacement Engine #1: 2013 CAT 3516C-HD S#PM300141, 2150hp, 1200rpm, new surplus (test hours only), EPA tier 2, ABS certified, IMO compliant, engine air cleaners included. Additional work: remove the heat exchanger and piping, and replace with a radiator cooling system set-up. Replacement Engine #2: 2012 CAT 3516C-HD S#PES00745, 2150hp, 1200rpm, new surplus (test hours only), EPA tier 2, ABS certified, IMO compliant, engine air cleaners included. Additional work: remove the heat exchanger and piping, and replace with a radiator cooling system set-up. This engine will be mounted on a customer-provided skid base. One engine has about 20 hours, and 2nd engine has about 130 hours.
Cold water high-pressure cleaner Working pressure: infinitely variable up to 350 bar Required quantity:up to 21l/min (1.260l/h) Pump:3-Plunger All-Ceramic Engine:2 Cyilinder, Hatz Diesel,air-throated Motor power:17 kW Speed motor/pump: 2,900/1,450 rpm Pump drive: V-belt Fuel consumption:approx. 4,0l/h Volume fuel tank:20l Pressure outlet (water):M221.5AG Heating capacity Olbrenner Empty Weight:215kg Mass(LWH) 918096 Article no.: 1 492 060 or 1 492 002
used
Hot and cold water high-pressure cleaners Working pressure:infinitely variable up to 350 bar max requirement quantity:16l/min Pump:3 Plunger,All-ceramic Engine:Kubota 3-cylinder diesel Motor power:13kW Speed motor & pump: 3000/1,090 rpm Pump drive:V-belts Fuel consumption:3,9l/h Volume of carbon tank:70l Volume water tank:300l Pressure outlet (water) M22 1.5IG Heating capacity olburner: max1115kW (approx. 95°C) Consumption Olbrenner: approx. 7l/h Construction:self-supporting frame on frame with forklift pockets Empty weight:about 680kg Mass(LWH) 152122146 Dimensions open (LWH) 183122195 Article no.: 1 480 030
For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled
table diameter: 330 mm table load: 350 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 120 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 52 Kg dimensions of the machine ca.: 640 x 490 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...
Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
Key data: 1600 KW, 2000 kVA, 400 V
Caterpillar 3516B Diesel Generator Set – 2000 kVA | 1600 kW | 50 Hz | 1500 RPM Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516B Alternator: Caterpillar (SR4 Series) Year of Manufacture: 2001 Generator Serial Number: 7TN01129 Electrical Ratings Rated Output: 2000 kVA Power Output: 1600 kW Power Factor: 0.8 Frequency: 50 Hz Voltage: 400 Volts Current: 2887 Amps Phase: 3 Phase Speed: 1500 RPM Generator & Alternator Data Excitation Voltage: 22 Volts Excitation Current: 5.8 Amps Frame Size: 826 Insulation Class: Class H Maximum Temperature Rise: 105°C (by resistance) Ambient Temperature Rating: 40°C Altitude Rating: Up to 1000 meters Configuration Winding: 3 Phase Leads: 6 Wire Arrangement: Series Operational Status: Fully operational and generating power This Caterpillar 3516B diesel generator set ...
Skin area: 345 x 495 mm Part size: Max. approx. 120 mm Carton size: 345 x 495 mm Film width: 390 mm Including roller punch / cylinder punching machine Illig ZSM60 Contact details for ordering SKIN foil and cardboard available. Prior sale reserved - errors possible. Internal Reference Number: D-1149
Submersible pump, TA160/350-G+131, Brinkmann Pumps, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has some storage marks due to the long storage period, Technical data: - 220L/min, 2m, - 240/400V 0,5KW, - Immersion depth 350mm, - Flange outer diameter 180mm, - Pitch circle diameter 160mm z=4, - 58x22x18cm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. ...
clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...
Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
We offer Doka Eurex 20- 350 WB Supports cleaned and checked. Original Doka rental storage quality. The support corresponds to the Doka Eurex Eco series. Doka Eurex 20-350 WB. 39,50€/ Piece Doka stacking pallet 1.55m x 0.85m = 120€/ piece Column class B/D according to standard EN 1065 General technical approval Z-8.311-942 High load capacity of up to 36.7 kN depending on extension length, minimum load capacity of 20 kN for each extension length Numbered and embossed stake-out holes and ergonomic stake-out bracket for easy and quick height adjustment Fast and safe loosening of the forged adjustment nut even under load thanks to special thread geometry Crush protection (10 cm free space when the support is inserted) and fail-safe (protection against falling out of the inner tube) for safe work Long service life due to high-quality zinc plating Quick connection for ten ...
Marble plate STOLLE Length: 3500 mm Width: 2500 mm Thickness: 305 mm Height on feet: 900 mm Delivered with 12 levelling feet Weight: 6,3 T
Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.
3516 Diesel Generator Set Just 1032 WORKING HOURS!
Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h ...
Key data: 1600 mm, 3500 mm, 800 mm
For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...
Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection
Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel
Hello all we have 10 pcs Caterpillar 3512B gen sets available with control panels 1200 Kw - 50 Hz Year of build is 2008 aprox working hours: 12000-15000 Location: Far east Please contact info@fin-marine for information
As good as new hand groove device / creasing device, working width 355mm
Key data: 1000 , 166 , 40
Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface
clamping force: 350 kN injection volume: 59 cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power ...
TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation
The scope of delivery includes: 01x Shelf connector, used Mounting type: on the side of the shelf stand Surface: sendz. galvanized Total length: 450 mm for shelf spacing: approx. 350 mm Profile abm.: U 62 x 30 mm Weight: 0,84 kg | Pcs.
Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 620-1040 mm adjustable -Roll width: 355 mm -Dimensions: 480/480/H620 mm -Weight: 16 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg
Converter, converter, converter, drive converter, controller, inverter -SEW: Movitron Type 355 825074X -Input: E 380-415 V 50 (60) Hz -Output: G 0 ... 460 V 55 A -Temperature: 0-45 °C -Protection class: IP00 -Dimensions: 335/220/H175 mm -Weight: 7.2 kg
Refer to code 1020 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
1,000kW 60Hz 61HR CAT 3508 Generator Set This CAT 3508 generator set was decommissioned in Feb 2023 and has been currently being stored. This generator set has been used as an emergency standby generator for a government office building in Korea. Since the operation time is very short at 61 hours and maintenance has been excellent, it is currently in the best condition and can be operated immediately. Main specifications: - Engine Model: CAT 3508 x 1 Set - Maker: CATERPILLER - Application: STANDBY - Output: 1,000kW x 1,800 rpm - Frequency & Voltage: 60Hz & 380V - Year of Production: 2004 - Running Hours: 61hrs - Fuel Oil: Diesel Oil
Face plate, face plate chuck, four-jaw chuck -Transfer in current condition as seen -Jaws and threaded rods: missing -Chuck size: Ø 355 mm -Weight: 15 kg
Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories
Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)
Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes
Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Bosch, pneumatic cylinder type 0 822 351 008 -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm / M12x1.25 -Dimensions: 445/75 / H70 mm -Weight: 1.9 kg
Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: max. 1335 mm, adjustable -Roll: Ø 25 x 350 mm -Dimensions: 550/520/H970 mm -Weight: 13 kg
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC13-71A(02-01) - Stage 3A Engine No.: 7395788 Power: 315 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: ECO 38.2 L 4 C Gene. No.: P242434 Generator power: 350 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 740 Dimensions of the power unit: Width approx. mm: 1.800 Height approx. mm: 2.340 ...
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 484/53/H53 mm -Weight: 1.8 kg/piece
Stick electrodes 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 355 mm -Admission thread pitch: 4 mm -Rezess: Ø 70 mm -Weight: 35 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: O 355 mm -Short taper: size 8 (139.7 mm) -Number: 1x discs available -Price per piece -Dimensions: O 355 / H175 mm -Weight: 38 kg
• Description: Versatile punch with many inserts • Power: max. pressure: 35t • Working height: approx. 1000 mm • Dimensions: 1350 x 850 x 1724 mm • Weight: 1540 kg • In operation since: 06.1998 • Accessories: Trolley with many suitable tools
Powder dispersing plant (powder mixer) Manafacturer: Frystam Shear Pump: Type: FSPE 3532 D No.: 0574460006 Power: 11-22 kW Centrifugal pump: Type: FZ 20 A Power: 7.5-11 kW complete system on a mobile frame with integrated hopper(diameter: 690 mm); Capacity: approx. 65 l with inlet and outlet with sight glass with control cabinet in EEx protection Condition as good as new, rarely in operation LWH: 1350 x 900 x 1050 mm Weight: approx. 350 kg
maximum number of results exceeded
please refine your search
