lind used for sale

Used tow tractor of the brand Linde, type P30C. 2013 Year of manufacture, nominal load capacity 3000 kg Condition GOOD At the moment, the vehicle is not ready to drive because the battery is empty. I also offer 4x transport trolley Cargo-Liner in another advertisement.

weight max. in kg: 3000 kg fork length: 1600 mm stroke height: 3250 mm weight of the machine ca.: 3,48 t dimensions of the machine ca.: m CE signed: Machine still in the delivery factory: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Towing capacity: 6000kg, platform load capacity: 150kg, rated tractive force: 1200N, max. tractive force: 6500N, travel speed with/without load: 20km/h/12km/h, axle load front/rear: 550kg/860kg, wheelbase: 1190mm, track width: 860mm, turning radius: 1650mm, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2100mm, weight: approx. 1800kg. Including 4 trailers. Documentation available. An on-site inspection is possible.

Width: 1,400 mm, Height: 1,120 mm, Length: 2,450 mm, Package cross-section: 300 x 300 mm, Drive power: 2 x 90 kW, Working pressure: 290 bar, Max. working pressure: 300 bar, Year of construction: 1986, Weight: approx. 50 t

A single-shaft shredder Lindner is available. Power: 160kW, working width: 2525mm, rotor speed: 100rpm, knife system: Mono-Fix, hopper opening X/Y: 3200mm/2400mm, volume: 5.6m³, filling height: 2600mm. Machine dimensions X/Y/Z: approx. 4750mm/2500mm/3400mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible.

ID3611 Linde H70D-03 year/Baujahr 2017 approx. 21.270 hours/hours 11.3 t Forklift, load capacity 7000 kg Forklift, load capacity 7000 kg

Double Z Kneader / Sigma Kneader / Shovel Kneader / Trough Kneader Linden - Make HermannLinden, built in 1965 - Machine type K II 60, factory no. 605 - Refurbished in 2025, electrical equipment completely new - Frequency-controlled electric motor 4.0 KW - Frequency converter Optidrive E3 IP66 Outdoor with main switch, potentiometer and reversal of the direction of rotation - Control box with main switch, emergency stop and undervoltage tripping - Speed from approx. 20 to 200 rpm. - Belt drive - 2 Z-waves - All parts in contact with the product in copper and stainless steel - Single-walled copper container approx. 600 x 600 x 450 mm = approx. 150 litres - Emptying by manual tilting by means of a handwheel - Weight approx. 1200 kg - Overall dimensions approx. 1400 x 1500 x 1700 mm - Very stable design. Lubricated with H1 food fat.

weight max. in kg: 3000 kg serial number: H2X393B03409 Number of working hours: 12550 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1400 kg stroke: 5675 mm fork length: 1150 mm Number of working hours: h weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,55 x 1,2 x 2,57 m Reach truck including charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double Z Kneader / Sigma Kneader / Shovel Kneader / Trough Kneader Linden Suitable for highly viscous, tough, plastic or sticky materials such as adhesives, sealants or pastes. Thanks to their two interlocking Z-shaped kneading arms, they can process substances that are hardly homogenizable with normal mixers. - Make HermannLinden, built in 1965 - Machine type K II 60, factory no. 605 - Refurbished in 2025, electrical equipment completely new - Frequency-controlled electric motor 4.0 KW - Frequency converter Optidrive E3 IP66 Outdoor with main switch, potentiometer and reversal of the direction of rotation - Control box with main switch, emergency stop and undervoltage tripping - Speed from approx. 15 to 60 rpm. - Belt drive - 2 Z-waves - All parts in contact with the product in copper and stainless steel - Single-walled copper container approx. 600 x 600 x 450 mm = appr ...

CHAIN NEXTRACTION BELT, 4.370 mm long, 5,5 kW motor, Spaggiari gearbox With central chain transport and paddles Flat type on supports Stainless steel structure, n.4 F218 bearings Construction year 2013 510 mm.outer width 410 mm.inside width, installed power - used power in work: about 60-65% : 5,5 kW, working width: 410 mm., conditions: checked

pressure: 20 t weight of the machine ca.: 590 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

General SKU398W1238 MakeHermann Linden LocationBarneveld TypeK111-60A Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume60 Ltr. Motor5.5 KW Specified Features - Z-blade mixer MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Z-blade mixercheck Capacity60 l. Trough sizes430x525x500 mm With covercheck With jacketcheck Double gearedcheck Motor5,5 + 3,7 kW, 400 volt, 1420 rpm With variable speed drivecheck Frequency converter Screw dischargecheck Dia. 125 mm With variable speed drivecheck Frequency converter Information No.1726 Year of construction1995 Mounted on foundationcheck With switchgearcheck(as is) Floorspace2,20x1,30 m Total height1,60 m Weight2690 kgZ-blade mixersHermann LindenKneaders > Z-blade mixersBrand > Hermann Linden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Manufacturer: Linde, hydraulic line PV/22 TA-No: 1/2193046 -Art.Nr.: 3794401507 -Price: per piece -Number: 2 piece -Dimensions: 640/220/H30 mm -Weight: 0.5 kg

Fieldbus gateway, Canopen Fieldbus gateway: for EnDat encoders -Output signal: CANopen, DeviceNet or PROFIBUS DP protocol -to connect: from encoder to fieldbus -Signal converter: for encoders of the 600 series with EnDat interface -Protection class: IP 65 -Dimensions: 90/145/H30 mm -Weight: 0.38 kg

Control unit for electric forklifts, electric motor, DC motor, drive motor, motor control, motor controller, control, drive control, voltage converter, cooling fan, radiator, fan -Manufacturer: Linde, cooling fan from Linde R14 forklift -Dimensions: 260/150/H80 mm -Weight: 1.0 kg

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -

General SKU329X704 MakeHermann Linden LocationBarneveld CEcheck TypeKIII5A Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume5 Ltr. Motor2.2 KW Specified Features - Z-blade mixer MaterialStainless steel 1.4301 (304) Z-blade mixercheck Capacity5 l. Trough sizes190x240x200 mm With covercheck With jacketcheck Single gearedcheck With adjustable packing glandscheck Motor2,2 kW, 400 volt, 1420 rpm With variable speed drivecheck Arm speed568 rpm Screw dischargecheck Motor3,7 kW, 400 volt, 1420 rpm With variable speed drivecheck Screw speed14/72/144 rpm Information No.1767 Year of construction1996 Mounted on foundationcheck With switchcheck With switchgearcheck Sizes switchgear0,60x0,40x2,0 m Floorspace1,30x0,80 m Total height1,50 m Extra SpecificationsWith Lauda oil heating, type K6 KSZ-blade mixersHermann LindenKneaders > Z-blade mi ...

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, drawbar complete with drive from electric hand pallet truck -Drive motor: Type T 12 24 V -Sale/Price: complete -Dimensions: 1200/440/H290 mm -Weight: 46 kg

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

General SKU378S924 MakeLindor achinenfabrieken B.V. (NL) TypeLINDOR L-00070-R-CR60000 LocationBarneveld CEcheck Main Features MaterialStainless steel Volume70 Ltr. Motor0.37 KW Specified Features - Tumbler mixer Capacity70 ltr. Diameter600mm Cylindrical length380mm Conical length60mm (2x) Inlet105x45mm Outlet85x35mm With motor0.37 kW 230/400 volt (Ex) Speed mixer11 rpm MaterialStainless steel Information No.177 Year of construction2004 Floorspace1,1x0,9 M Total height1,1 M Weight260 Kg ATEX compatiblecheck Extra SpecificationsThe drum contains 3 inspection hatches of 180x135mm Includes protection cap and filler pipe Tumbler mixersLindorMixers > Tumbler mixersBrand > Lindor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

Control, control unit, interface, drive control, drive current control, circuit board -Manufacturer: Linde, control unit from electric hand pallet truck -Type: 3603605020 -Mat no.: 5210175 -Number: 1x control unit available -Price per piece -Dimensions: 130/100/H45 mm -Weight: 0.1 kg/pc.

Horn, siren, bugle, bugle -Manufacturer: Marco, horn siren from Linde electric hand pallet truck -Type: 90/1 L -Dimensions: Ø 90 x 60 mm -Weight: 0.1 kg

Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg

General SKUR1268 MakeHermann Linden Maschinenfabrik (D) LocationBarneveld CEcheck TypeLPM 1 EWD Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume0.75 Ltr. Motor3 KW Specified Features - Planetary mixer Planetary mixercheck 2 Mixing/kneading shaftscheck Motor3 kW 400 Volt With covercheck Capacity0.75 ltr Pan sizesdia. 100x100mm MaterialStainless steel Information No.2061 Year of construction2006 With switchgearcheck Floor space1,2x0,6 M Total height2,1 M Weight500 Kg Extra Specificationselectrically operated lifting Planetary mixersHermann LindenMixers > Planetary mixersBrand > Hermann Linden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKUR1272 MakeHermann Linden Maschinenfabrik (D) LocationBarneveld TypeLPM 1 EWD Main Features MaterialStainless steel Volume0.75 Ltr. Motor0.37 KW Specified Features - Planetary mixer MaterialStainless steel Planetary mixercheck 2 Mixing/kneading shaftscheck With scrapercheck Motor0,37 kW 220-240/380-415 volt Speed mixing/kneading arms88 rpm With covercheck With pancheck Capacity0.75 ltr. Pan sizesdia. 100x100mm With jacketcheck Information No.1811 Year of construction1997 With switchcheck Floor space0,6x0,3 M Total height0,9 M Weight75 KgPlanetary mixersHermann LindenMixers > Planetary mixersBrand > Hermann Linden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit ...

• Model: Lindner Urraco 95 DK, • Year of construction: 2021, • Operating hours: 7,230 h, • Engine: Scania V8 Diesel, 770 HP, • Drive: chain track with rubber pads, • Application: High-performance shredder for wood, trash, plastics, green waste, and root stocks, Including accessories, • 2 sentences shafts one used and one armored, – Suitable for wood, waste, plastic, green waste, and root stumps, – Both sentences are armored and ready for immediate use, • Model: Lindner Urraco 95, • Year of construction: 2021, • Operating hours: 7.230, • Drive: Tracked drive with rubber pads

General SKU017H052 MakeHermann Linden Maschinenfabrik TypeLPMD-2 No.1555 Year of construction1991 LocationBarneveld Material Pan materialStainless steel 1.4401 (316) Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2 Ltr. Motor1.1 KW Specified Features - Planetary mixer Planetary mixer/dissolver (1x) Motor1,1 KW, 220/380 Volt With variable speed drivecheck Speed scrapervariable, Motor scraper 0,55 KW, 220/380 Volt With covercheck With pancheck Capacity2 Ltr Pan sizesdia. 160x110mm With jacketcheck MaterialStainless steel Information With switchcheck Floor space1,0x0,7 M Total height1,8 M Weight440 KGDiscountPlanetary mixersHermann LindenDiscountMixers > Planetary mixersBrand > Hermann Linden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

Drive axle, AT unit, hydraulic motor -Manufacturer: Linde, drive axle LR for forklift H60D -Hydraulic unit: Linde MV75 -Axis: bolt circle Ø 225 mm -Individual components: see photos -Price/tax: complete -Dimensions: 850/860/H400 mm each -Weight: 290 kg/pc.

Muffler, exhaust system, tailpipe, silencer, exhaust muffler -Silencer: for Linde H60D -Type: G 4979 0694 unfortunately no more precise designation -Dimensions: see photos -Overall dimensions: 1560/370/H230 mm -Weight: 11.2 kg

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg

Trailer coupling, trailer coupling, jaw coupling, automatic jaw coupling -Trailer coupling: from electric tractor Linde P 250 -Towing capacity: 16 t -Transport dimensions: 225/112/H340 mm -Weight: 6.4 kg

Nominal load 1200 kg Running time 10287 h

Control device for electric forklift, electric motor, DC motor, traction motor, drive motor, motor control, motor controller, control, drive control, voltage converter -Manufacturer: Linde, forklift control with voltage converter from forklift Linde R14 -Type: LDC-32/10-HE01 390 360 53 68 Inverter 79 174 01 236 -Dimensions: 265/170 / H55 mm -Weight: 1.5 kg

Electric forklifts, electric forklifts, electric forklifts -Manufacturer: Linde, electric forklift truck type E20 -Load capacity: 2000 kg -Lifting height: 3800 mm -Tine length: 1250 mm, cross section 125 x 45 mm -Operating hours: 10270 h -Battery: Type 4 PzS 620K 80V -Accessories: including charger Varta 80 V / 125 A see photos -Dimension: 555/520/H690 mm / 162 kg -Dimensions of the stacker: 2030/1150/H2300 mm / with mast height 2500 mm -Weight: 2890 kg

Incremental encoder with solid shaft, absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, rotary pulse encoder, tachogenerator, incremental encoder -Manufacturer: Leine & Linde, incremental encoder -Type: 63062 -Shaft: Ø 6 x 12 mm -Dimensions: 75/58/H72 mm -Weight: 0.2 kg

Control panel, control unit, steering, steering unit -Manufacturer: Linde, steering unit control unit from electric tractor P 250 -Individual components: see photos -Transport dimensions: 630/470/H355 mm -Weight: 16.6 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, tiller complete with drive from electric high-lift truck L 12 -Drive motor: Type T 12 24 V -Submission/Price: complete -Transport dimensions: 1200/440/H270 mm -Weight: 44 kg