lind used for sale

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing p ...

Pallet Production Line / SAS bracket line Three people are needed to operate the line and two people to operate the saws for cutting the supports Saw cutting can be further automated. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 4x Cargo-Liner SP1/SP4 VKD suitable for the Linde tow tractor Linde P30C. Max. payload 500 kg Max. towing weight 3000 kg The cars are little used and in good condition.

Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated  ...

Div. fuses z.B Lindner new product for 30% reduction 6 PCs. original packed to 50.-NET. Others on request. Info under 0170 / 2204056 Mail to fa.raupp@t-online

Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work

Filling line for stand-up pouches - LINAPACK Year of construction: 2018 Bag types: Stand-up pouches of all types Shape cut Euro hole Spout and cap 45° One format set is required per bag format Format set for 250ml stand-up pouches with Euro hole available. Filling process: Hot filling at 71 - 85°C Filling goods: previous filling goods - were various cocktail drinks Output: approx. 50 bags / min depending on the product - 750-900 liters/h 1. Buffer tank Equipped with agitator, flow meter (E+H), level indicator, cleaning ball, pouring basin. The buffer tank is fully automatically connected to the pasteurizer and its control system. Volume: approx. 1,000 liters 2. Pasteurization unit PAS-900 For the gentle heating of RTD beverages or similar products. With a capacity of 750-1.000 liters per hour. Previous energy source: steam The pasteurizer work ...

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Manufacturer: Linde, hydraulic line PV/22 TA-No: 1/2193046 -Art.Nr.: 3794401507 -Price: per piece -Number: 2 piece -Dimensions: 640/220/H30 mm -Weight: 0.5 kg

WINE BOTTLING LINE 4.000 BOTTLES/HOUR - 28-station rinser - 28-valve filler - Corking machine with 6 heads - Bottle: Glass - Speed: 4.000 bottles/hour of 0,75l Find more here - .ucymachines/ Contact us at - sales@ucymachines

Nr. 03 SINGLE-OVITE EXTRUDERS DIAMETER 100 Nr. 01 HEAD CONSTRUCTION 2 LAYERS

BATTERING-GLUING AND BREADING MACHINE, STEIN, MESH WIDHT 200MM Technical features: Battering-gluer: Material: Stainless steel Power supply: 380V-440 / 50-60Hz Battering-gluer dimensions: 1200 x 700 x 2000 mm Breader, Stein, model: E8J Serial number: 184 Bandwidht: 200 mm Dimensions: 2400 x 750 x 2000 mm

In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.

Qty. 1 Second-hand H-Beam production line Mfc.: Production Line: B&K Welding Machines: THERMATOOL Saw Cutting: LINCOLN Driving Part: Seoho Electric Drive: PAKER PLC: MITSUBISHI Leveller: FLATTENER Press cutter & DDS: Samyang Run-out Table: Wuchang Production range: No. Class Width (mm) Thickness (mm) Length(M) 1 Web 53 ~ 450 2.3 ~ 12.0 6.0 ~ 18.0 2 Flange 50 ~ 300 3.0 ~ 12.0 Capacity: 60,000 MT/annum Equipment total weight: approx.139 MT First installation: 10/1973 Type: Welding H-Beam Facility Welding Type: Electric Resistance Welding Cutting type: Cut-Off Saw, Presscutter Line Speed: Max. 37 m/min.

Vehicle data: Make: Linde, Type: Door LIN3944379144, Year of manufacture: 0, Internal number: DIV1344, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description:

Manufacturer: Linde, Type: H 30/Diesel, Year: 1991, Drive type: Diesei, Lift mast type: Triplex, Total hight mm: ca., Fork length in mm: 1370, Lifting power kg: 3000, Lifting hight approx. mm: ca.3250, FREE TEXT: Vollgummibereifung 4-fach vorne hinten normal/verbreiterte Gabelaufnahme 1720 mm, Year :1991

Production lines: 1. Polyester fiber production line (Chinese brand) Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the conjugated type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. + In 2019 i ...

# ABB 15kV 8-Bay MV Switchgear Lineup Model: ABB-MV-15-8 Voltage Class: 15 kV Configuration: 8-Bay Lineup Fault Rating: 40 kA Product Overview The ABB 15kV 8-Bay Medium Voltage (MV) Switchgear Lineup is a high-performance power distribution solution engineered for utility, industrial, commercial, and infrastructure applications requiring safe, reliable, and efficient medium-voltage power control. Built on ABB's proven switchgear technology, this lineup provides superior operational safety, system flexibility, and long-term reliability for critical electrical distribution networks. Designed for indoor installation, the 8-bay lineup offers a compact footprint while delivering advanced protection, control, metering, and monitoring capabilities. Its modular architecture allows seamless integration with existing power systems and future expansion requirements. Key Features ...

Used forklift Linde H 160 for sale – 16 tons capacity, diesel, built in 1999 We offer a used Linde H 160 forklift for sale, ideal for demanding industrial applications. Technical details: Manufacturer: Linde Model: H 160 Propulsion: Diesel engine Lifting capacity: 16 tons Year of Make: 1999 Equipment: Full cabin Accessories: Long forks This Linde H 160 forklift is particularly robust and reliable, which makes it perfect for transporting heavy loads. Thanks to the full cab, the truck offers optimum driving comfort and protection in all weather conditions. Condition: Used, but well maintained and ready to use. This Linde forklift is an economical choice for operations looking for a reliable material handling solution. Contact us now for more information or to view!

roll diameter: 660/700 mm roll length: 2100/1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-Roll L-Calender - Line - second-hand 4-roll Buzuluk L-calender 700x1800 Mixing mill Buzuluk 660x2100 Complete 4-roll L-calender line. The line was used for the production of transparent PVC. However, the basic machines can also be used for rubber. The most important machines in the line: Pos. 8: Liquid mixer make Trusionma hot and cold Pos. 10: KO Kneader make BUSS Item 12: Buzuluk 660x2100 mixing roller mill Item 14: 4-roll L-calender make Buzuluk 700x1800 Items 15-19: Tempering and basin equipment behind the calender Roller conveyor Item 20: Layer thickness profile measuring device Item 23: Rewinding device The system was used for transparent soft PVC. Machines are still installed. The data for this ad was  ...

2 Units x Lindley Thompson 1500 kVA Oil-Filled Transformer – 11kV / 433V - FOR SALE - 1500 KVA Three Phase Oil-Filled Transformer Lindley Thompson Ltd. transformer manufactured to E.S.I. Standard 35-14, suitable for industrial, commercial and utility power distribution applications. Technical Specifications Manufacturer: Lindley Thompson Ltd. Rated Power: 1,500 kVA High Voltage: 11,000 V Low Voltage: 433 V Frequency: 50 Hz Phases: 3 Phase Cooling: LNAN Vector Group: Dyn11 Impedance: 5.28% HV Tappings: +5%, +2.5%, Normal, -2.5%, -5% Oil Capacity: Approx. 675 litres Core & Windings: 2,095 kg Total Mass: 4,480 kg Year of Manufacture: 1990 Manufacturer’s Serial No.: C61844F Standard: E.S.I. Standard 35-14 Available for sale is a Lindley Thompson 1,500 kVA, 11kV/433V three-phase oil-filled distribution transformer. The unit features Dyn11 vector configuration, ...

A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx.  ...

We offer you a used shelf connector here f. Double rack rows from the manufacturer Link 51 for sale. The shelving connectors are designed for a shelf spacing of approx. 400 mm. Specifications for the shelf connector: Manufacturer: Link 51 Type: Boltless XL Included in the scope of delivery are: 01x Shelf connector used (consisting of 2 profiles) Suitable for: double rack rows Material color: anthracite Total length: approx. 515 mm Shelf spacing: approx. 400 mm U-profile: approx. 27 x 30 mm Weight/pcs.: approx. 1,321 kg /pc. 04x Hexagonal screws, M8 x 45 04x Hexnut nut, M8 04x Washers, M8

We offer you a used shelf connector here f. Double rack rows from the manufacturer Link 51 for sale. The shelving connectors are designed for a shelf spacing of approx. 300 mm. Specifications for the shelf connector: Manufacturer: Link 51 Type: Boltless XL Included in the scope of delivery are: 01x Shelf connector used (consisting of 2 profiles) Suitable for: double rack rows Material color: anthracite Total length: approx. 415 mm Shelf spacing: approx. 300 mm U-profile: approx. 27 x 30 mm Weight/pc.: approx. 1,092 kg /pc. 04x Hexagonal screws, M8 x 45 04x Hexnut nut, M8 04x Washers, M8

We offer you a used shelf connector here f. Double rack rows from the manufacturer Link 51 for sale. The shelving connectors are designed for a shelf spacing of approx. 650 mm. Specifications for the shelf connector: Manufacturer: Link 51 Type: Boltless XL Included in the scope of delivery are: 01x Shelf connector used (consisting of 2 profiles) Suitable for: double rack rows Material color: anthracite Total length: approx. 765 mm Shelf spacing: approx. 650 mm U-profile: approx. 27 x 30 mm Weight/pcs.: approx. 1,878 kg /pc. 04x Hexagonal screws, M8 x 45 04x Hexnut,M8 04x Washers,M8

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical

Linde Cryoline MT1250 Freezing tunnel Serial: 5-19 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscre ...

weight max. in kg: 1.400 kg fork length: 1.100 mm stroke height: 6.295 mm load center distance: 400 - 600 mm battery: 48 V Electric side forklift | Linde - R14 The LINDE electric forklift truck is in good condition and can be inspected at any time. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: R 14 | R-14 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control unit for electric forklifts, electric motor, DC motor, drive motor, motor control, motor controller, control, drive control, voltage converter, cooling fan, radiator, fan -Manufacturer: Linde, cooling fan from Linde R14 forklift -Dimensions: 260/150/H80 mm -Weight: 1.0 kg

EKRA Drucker X3 Automatic Screen & Stencil Printer is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety It has a modified hood so that large stencils can also be used. This is the retrofitted stencil cleaning system (stencil underside cleaning). Installed in the machine The X3 automatic screen and stencil printer is specially designed for the flexible production demands of today’s market. The X3 can be used for the application of solder paste and / or glue onto PCBs, ceramics or glass substrates up to a size of max. 460 x 460 mm (18 x 18 inches). The standard EKRA screen and stencil holder has a flexible design which allows it to be used with all common stencils / screens up to 740 mm (29 inches) without use of an additional adapter. Quick clamp adapter systems of various manufacturers can e ...

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Linde, hydraulic control block, control unit, control valve for Linde H30 forklifts -Valves: see photos -Dimensions: 440/185/H900 mm -Weight: 10.8 kg

Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately

General SKU398W1238 MakeHermann Linden TypeK111-60A LocationBarneveld Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume60 Ltr. Motor5.5 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity60 l. Trough sizes430x525x500 mm With covercheck With jacketcheck Double gearedcheck Motor5,5 + 3,7 kW, 400 volt, 1420 rpm With variable speed driveFrequency converter Screw dischargeDia. 125 mm With variable speed driveFrequency converter MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) With jacketcheck General No.1726 Year of construction1995 Mounted on foundationcheck With switchgear(as is) Floorspace2,20x1,30 m Total height1,60 m Weight2690 kgPaints & coatingsOintmentsStarchAgrochemicalsRubberPlastic & polymersLubricants & oleoAnimal feedConfectioneryZ-blade mixersHermann LindenIndustries > Chemical > Paints & coatings ...

General SKU329X704 MakeHermann Linden LocationBarneveld CEcheck TypeKIII5A Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume5 Ltr. Motor2.2 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity5 l. Trough sizes190x240x200 mm With covercheck With jacketcheck Single gearedcheck With adjustable packing glandscheck Motor2,2 kW, 400 volt, 1420 rpm With variable speed drivecheck Arm speed568 rpm Screw dischargecheck Motor3,7 kW, 400 volt, 1420 rpm With variable speed drivecheck Screw speed14/72/144 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.1767 Year of construction1996 Mounted on foundationcheck With switchcheck With switchgear(as is) Sizes switchgear0,60x0,40x2,0 m Floorspace1,30x0,80 m Total height1,50 m Extra SpecificationsWith Lauda oil heating, type K6 KSPaints & coatingsOintmentsStarchA ...

General SKUR1272 MakeHermann Linden Maschinenfabrik (D) LocationBarneveld TypeLPM 1 EWD Main Features MaterialStainless steel Volume0.75 Ltr. Motor0.37 KW Specified Features - Planetary mixer Planetary mixercheck 2 Mixing/kneading shaftscheck With scrapercheck Motor0,37 kW 220-240/380-415 volt Speed mixing/kneading arms88 rpm With covercheck With pancheck Capacity0.75 ltr. Pan sizesdia. 100x100mm With jacketcheck MaterialStainless steel With jacketcheck General No.1811 Year of construction1997 With switchcheck Floor space0,6x0,3 M Total height0,9 M Weight75 KgOils & fatPowdered foodsGeneric medicinesOintmentsRubberBiotechnologySpicesFeed additivesOther pharmaceuticsCosmeticsFood additivesLubricants & oleoOther feedConfectioneryAPIPlanetary mixersHermann LindenIndustries > Food & Feed > Oils & fatIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceut ...

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Machine Type : Power Press Hours: 46,900 (currently still running) - Blade width : 80x80 - Box length : Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - .ucymachines/ Contact us at - sales@ucymachines

Control device for electric forklift, electric motor, DC motor, traction motor, drive motor, motor control, motor controller, control, drive control, voltage converter -Manufacturer: Linde, forklift control with voltage converter from forklift Linde R14 -Type: LDC-32/10-HE01 390 360 53 68 Inverter 79 174 01 236 -Dimensions: 265/170 / H55 mm -Weight: 1.5 kg

General SKU001B017 MakeHermann Linden GmbH Marienheide TypeK-IV 300 SP No.885 Year of construction1973 LocationBarneveld Main Features MaterialStainless steel Volume300 Ltr. Motor24 KW Specified Features - Z-blade mixer Z-blade mixer(1x) Capacity300 Ltr (useful) Trough sizes750x1000mm With covercheck With jacketcheck Double gearedcheck With adjustable packing glandscheck Motor16/24 KW, 500 Volt (Ex) Bottom outlet(2x dia. 200mm) MaterialStainless steel 1.4571 (316Ti) With jacketcheck General With switchcheck Floorspace3,6x1,6 M Total height1,5 M Weight2600 KG ATEX designedcheckOils & fatPaints & coatingsPowdered foodsStarchOther chemicalRubberPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDiscountDetergent & surf.Other pharmaceuticsCosmeticsSugarLubricants & oleoAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsZ-blade mixersMinerals & in ...

Belt sander manufactured in 2019. This Lingi Jianzhong BSG2613C features a maximum working width of 1300 mm and a processing thickness range of 5-80 mm. It includes a grinding belt dimension of 1350x2800 mm and operates at a speed of 31 m/s. If you are looking to get high-quality sanding capabilities, consider the Lingi Jianzhong BSG2613C machine we have for sale. Contact us for further details.

General SKU017H052 MakeHermann Linden Maschinenfabrik TypeLPMD-2 No.1555 Year of construction1991 LocationBarneveld Material Pan materialStainless steel 1.4401 (316) Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume2 Ltr. Motor1.1 KW Specified Features - Planetary mixer Planetary mixer/dissolver 2 Mixing/kneading shaftscheck With scrapercheck Motor1,1 KW, 220/380 Volt With variable speed drivecheck Speed scrapervariable, Motor scraper 0,55 KW, 220/380 Volt With covercheck With pancheck Capacity2 Ltr Pan sizesdia. 160x110mm With jacketcheck MaterialStainless steel With jacketcheck General With switchcheck Floor space1,0x0,7 m Total height1,8 m Weight440 kgOils & fatPowdered foodsGeneric medicinesOintmentsRubberBiotechnologySpicesFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesLubricants & oleoOther feedConfectioner ...

General SKU289Y465 MakeHermann Linden Serial2034 TypeK II 450 No.4438/4439/2002 Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume450 Ltr. Motor45 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity450 l. (850 l.) Trough sizes1000 x 960 x 900 mm With covercheck With jacketcheck Double geared4,5 — 451 rpm/min Motor45 kW 400/690 V Hydraulic tiltingcheck Motor11 kW 400/690 V MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) With jacketcheck General Year of construction2002 LocationBarneveld With switchgear( as is) Floorspace3,45 × 2,18 m Total height2,5 m Weight9.000 kgPaints & coatingsOintmentsStarchAgrochemicalsRubberPlastic & polymersLubricants & oleoAnimal feedConfectioneryZ-blade mixersNew arrivalsHermann LindenIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > OintmentsIndus ...

weight max.: 3000 kg speed: max. 10.0 km/h Number of working hours: 10.015 h weight of the machine ca.: ca. 1000 kg Tugs were used by BOSCH (DE) Battery was boosted” in 04/2024 Maneuver and transport agilely and safely in narrow aisles The P30 electric tractor and platform truck from Linde Material Handling is suitable for flexible and safe transport processes on small and medium-sized businesses Distances – even and especially when there is little space available. The Vehicle has precise and self-centering power steering that the driver safely controlled with an ergonomic two-handed handle. Also relieved The compact design of the P30 allows you to maneuver in narrow aisles. The powerful three-phase motor accelerates quickly to the maximum Speed. Ensure a comfortable and secure stand while driving the adjustable backrest and the fully suspended standing platform non-slip floor cove ...

technical data: Make: Linck Track gauge: 850 mm Support height: approx. 470 mm

Composite plant Fabrikat Linde, 45kW at minus 10C evaporation, with control box, with 3 pcs. compressor Bitzer, type 4DC-5.2Y, Y.O.M.: 2004, with refrigerant R404A

Complete Line Consisting of 1.Sheet material unwind station (let off stand) 2. Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears, auto lubrication system with 45kW AC right angle drive motor and gearbox, Steam heated bowls up to 150c Bowl temperature monitoring system, fabricated bedplate. Overhauled in 2007 (by Iddon) with new side frame and rolls precision ground 3. Edge Trim - make: Mario Cotta 4. Guillotine - Make: Pasquato SNC 5. Wind up

Linde E 14 with charger

We offer 6x Piston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control