lim used for sale

Limit contact for bypass knife NBK-R KOBOLD NBK-R Medium temperature: max. 00 °C Switching capacity: max. 230 V AC, 1 A, 60 VA / W Contact function: bistable changeover contact Housing: Polycarbonate approx. 3.0 m Connection cable New, with documents ! Dimensions ( limit contact ): 130 x 22 x 18 mm Dimensions ( packaging ): 150 x 150 x 40 mm

Position switch, limit switch STAHL Type 8068/6 250 V AC, 5 A 250 V DC, 0.4 A approx. 0.8 m connection cable explosion-proof used, checked ! Dimensions ( position switch without cable and holder ): 85 x 28 x 13 mm Dimensions ( packaging ): 100 x 100 x 60 mm

Liquid Level Sensor, Conductive Limit Sensor, Level Sensor CARLO GAVAZZI VPC310 3 Probe Immersion depth: 500 / 1000 mm Sensor diameter: Ø 4 mm Screw-in thread: G 1 ( inch ) approx. 1,1,2 m connection cable Material: stainless steel ( electrodes ), PVC ( housing ) New ! Dimensions: 1150 x 80 x 45 mm

Contactor, 3 pieces SIEMENS SIRIUS 3RT1015-1BB41 3 NO 3,0 kW 400 V Us: 24 V DC with surge limiter 3RT1916-1BB00 used, tested ! Dimensions ( single auxiliary contactor ): 55 x 45 x 100 mm Dimensions ( packaging ): 135 x 55 x 100 mm

Position switch, crane runway limit switch TELEMECANIQUE XCR E18 ( XCRE18 ) IEC 947-5-1 EN 60 947-5-1 Switching arm length: 200 / 200 mm Switching capacity: 240 V AC, 3 A used, tested ! Dimensions ( without switch arm ): 130 x 130 x 80 mm

inductive series position switch, inductive series limit switch, limit switch BALLUFF BES 516-B5-PA-12-610-11 ( BES 516-B5-PA-12-610-11 ) 5 Sensors New ! Dimensions: 81 x 72 x 77 mm

inductive series position switch, inductive series limit switch, limit switch BALLUFF BES 516-B4-TG-610-11 ( BES516-B4-TG-610-11 ) 4 Sensors New ! Dimensions: 81 x 60 x 77 mm

Safety switches, limit switches, 2 pieces AMBER I88-U1Z RIWK 608.6117.017 300 / 500 V AC 10 A IP65 New Dimensions ( one switch ): 110 x 31 x 31 mm Dimensions ( packaging ): 120 x 70 x 40 mm

Position switches, limit switches, limit switches, with roller lever TELEMECANIQUE XCR-T115 IEC 947-5-1 EN 60 947-5-1 Switching arm length ( with roller ): 220 mm Roll: Ø 28 x 80 mm Switching capacity: 240 V AC, 3 A used, tested ! dimensions ( without switch arm ): 95 x 85 x 76 mm

Explosion-proof micro switch, position switch, limit switch ROBOTRON, ELECTRICAL SWITCHGEAR AUERBACH MEX AQ(8) 1.D2 136 33 91 2 380 V AC 6 / 16A IP54 1 Changer 3.0 m Connection cable Ex-protected New ! Dimensions ( micro button without cable ): 81 x 65 x 26 mm Dimensions ( packaging ): 190 x 170 x 50 mm

Explosion-proof micro switch, position switch, limit switch ROBOTRON, ELECTRICAL SWITCHGEAR AUERBACH MEX AQ(4) 1.D2 136 33 91 2 380 V AC 6 / 16A IP54 1 Changer 5.0 m connection cable Ex-protected New Dimensions ( micro button without cable ): 81 x 65 x 26 mm Dimensions ( packaging ): 170 x 150 x 60 mm

Position switches, limit switches, limit switches TELEMECANIQUE XCKJ10511H29 092854 IP66 Switching capacity: 240 V AC, 3 A New ! Dimensions ( position switch ): 135 x 40 x 60 mm Dimensions ( packaging ): 130 x 70 x 45 mm

Präzisionswasserwaage HEINRICH ERB KG, LÄNGENMESSTECHNIK LIMBACH Type: 250x250/0,02 Accuracy: 0,02 mm/m im Holzkasten used, tested ! Dimensions: 285 x 275 x 55 mm

ET module, signal box, position indicator, limit switch box ROTECH PF3EVFAZ Sensors: 2x PEPPERL+FUCHS SB3,5-E1 New, with documents ! Dimensions: 160 x 80 x 90 mm

Butterfly valve with pneumatic rotary actuator and limit switch END FITTINGS WA534014+ED621252+TM621407+PE080303 Butterfly valve: WA534014 DN250, PN16 Material ( housing ): Cast iron ( GGG-40 ) Material ( gasket ): EPDM Material ( washer ): Stainless steel ( 1.4408 ) Swivel actuator: ED621252 Control pressure: 6 - 8 bar solenoid valve: TM621407 Operating pressure: 1.5 - 8 bar Operating voltage: 230 V AC Limit switch: PE080303 Switching capacity: 250 V AC 3 A, 30 V DC 4 A IP67 New ! Dimensions: 810 x 395 x 340 mm

Butterfly valve with pneumatic rotary actuator and limit switch END FITTINGS WA534012+ED620852+TM621407+PE080303 Butterfly valve: WA534012 DN150, PN16 Material ( housing ): Cast iron ( GG-25 ) Material ( gasket ): EPDM Material ( disc ): Stainless steel ( 1.4408 ) Swivel actuator: ED620852 Control pressure: 6 - 8 bar solenoid valve: TM621407 Operating pressure: 1.5 - 8 bar Operating voltage: 230 V AC limit switch: PE080303 Switching capacity: 250 V AC 3 A, 30 V DC 4 A IP67 flange on both sides with connection for DN150 pipe system and clamping ring, two-part, with sealing compound Installation length: 166 mm Material: stainless steel ( flange ), galvanized steel ( clamping ring ) New ! Dimensions: 362 x 285 x 230 mm

Electric shaft drive, electric shaft winch, with limit switch ATB, DRIVE TECHNOLOGY G. BAUKNECHT 36W.09-E6 Speed: 9 rpm ( counted ) Shaft diameter: Ø 30 mm shaft length: 80 mm groove width: 8 mm Motor: RF0,37/2-7 1,0 kW 2800 rpm 220 / 380 V 3AC 50 Hz IP54 Gear base: 250 x 180 mm hole spacing (parallel to gear shaft): 155 mm hole spacing ( transverse to gear shaft ): 205 mm hole diameter: Ø 13 x 17 mm ( slotted hole ) New ! with documents ! Dimensions: 415 x 380 x 230 mm

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

sheet width: 2050 mm plate thickness: 6,0 mm pre-bending capacity: 4,0 mm upper roll diameter: 200 mm lower roll diameter: 180 mm bending speed: 5,2 m/min diameter: ca. 280 mm work height max.: 980 mm total power requirement: 5,5 kW weight of the machine ca.: 3500 kg. range L-W-H: 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - free-moving operation electric delivery rollers electric turning/rolling movement digital positi ...

Explosion-proof micro switch, position switch, limit switch ROBOTRON, ELECTRICAL SWITCHGEAR AUERBACH MEX AQ(3) 1.D1 136 33 91 2 380 V AC 6 / 16A IP54 1 Changer 0.5 m connection cable Ex-protected New, with documents ! Dimensions ( micro button without cable ): 67 x 58 x 24 mm Dimensions ( packaging ): 170 x 170 x 60 mm

Explosion-proof micro switch, position switch, limit switch ROBOTRON, ELECTRICAL SWITCHGEAR AUERBACH MEX AQ(3) 1.E2 136 33 91 2 380 V AC 6 / 16A IP54 1 changeover 1.0 m connection cable Ex-protected new, with documents ! Dimensions ( micro button without cable ): 81 x 80 x 26 mm Dimensions ( packaging ): 170 x 170 x 60 mm

Explosion-proof micro switch, position switch, limit switch ROBOTRON, ELECTRICAL SWITCHGEAR AUERBACH MEX AQ(6) 1.E2 136 33 91 2 380 V AC 6 / 16A IP54 1 Changer 2.0 m connection cable Ex-protected New ! with documents ! Dimensions ( micro button without cable ): 81 x 80 x 26 mm Dimensions ( packaging ): 170 x 170 x 60 mm

Micro buttons, position switches, limit switches MICROPRECISION S.A. MP 320 ( MP320 ) Length of fastening screw with actuator: 35 mm thread ( fastening screw ): M10 x 1,1,00 0 Length: 20 mm 1 Changer Switching capacity: 380 V AC, 6 / 10A IP67 approx. 3.0 m connection cable fastening screw and actuator made of stainless steel New ! Dimensions ( micro button without cable ): 62 x 32 x 11 mm Dimensions ( packaging ): 170 x 170 x 40 mm

sheet width: 2550 mm plate thickness: 4,0 mm thickness at Niro-steel: 3,0 mm cutting angle: 1°30 down holder: 12 Stück no. of strokes: 30 - 40 Hub/min back stop - adjustable: ca. 950 mm Control: DAC 150 engine output: 7,5 kW weight: 2800 kg range L-W-H: 3100 x 1900 x 1700 mm very well-maintained condition () Furnishing: - electro-hydraulic sheet metal shears // swing cut - DELEM DAC 150 NC control operable from the front Entry of target / actual for electr. backgauge - NC motorized backgauge with ball screws + guide shaft - electrical cutting length limitation - manual cutting gap adjustment - 1x side stop - 2x support arms - 1x free moving footswitch - front finger protection - EMERGENCY OFF button + main switch at the front - Instruction manual control Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325295 The data for this ad was create ...

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...

Negative Pressure Isolator from company Envair Limited

Foot switches, limit switches, 2 pieces ROBOTRON GWU 1-F ( GWU1-F ) NC and NO contact Switching capacity: 500 V AC, 6 A IP55 Other quantities on request ! New ! Dimensions ( single footswitch ): 150 x 75 x 40 mm Dimensions ( packaging ): 150 x 150 x 85 mm

sheet width: 2030 mm plate thickness: 4,0 mm thickness at Niro-steel: 2,5 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, p ...

sheet width: 0120 mm coil outside dia.: 1200 mm weight max. in kg: 300 kg sheet thickness - max.: 1,00 mm diam. of the rolls ca.: 10 mm nomb. of straightening rolls: 16 diameter of the mandrel: 350 - 530 mm total power requirement: 5,50 kW weight of the machine ca.: t dimensions of the machine ca.: m - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral a ...

sheet width: 0120 mm coil outside dia.: 800 mm weight max. in kg: 150 kg plate thickness: 1,50 mm diam. of the rolls ca.: 12 mm nomb. of straightening rolls: 16 diameter of the mandrel: 180 - 550 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet The data  ...

sheet width: 2030 mm plate thickness: 4,00 mm thickness at Niro-steel: 2,50 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, ...

Year: 2007 - technically efficient, ready to work - after full service - flow limitation: 0.2 mm - maximum welding dimension: 2400 mm - support arms

Bremsgeräte AER ANTRIEBSELEKTRONIK STATOMAT D 2225 / 01 ( D2225/01 ) RMS limit current: 50 + 50 A Operating voltage: 420 V 3AC Supply voltage: 230 / 115 V AC used, tested ! Dimensions: 185 x 165 x 155 mm

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Current meter, converter measurement, limit sensor with rotary instrument WATANABE WSC-65GD-1K-2/N Measuring range: 12 - 18 A AC switching contact: max. 250 V 0.5 A AC, 30 V 2 A DC Supply voltage: 180 - 240 V AC with converter transformer WCT - 1 ! used, checked ! Dimensions: 170 x 80 x 80 mm

bore capacity in steel (diameter): 28 mm throat: 250 mm bore stroke: 130 mm morse taper: 3 MK table:: 380 x 380 mm turning speeds: 75 - 3200 U/min thread: M16 ST60 column diameter: 98 mm engine output: 1,1 kW dimensions: 800 x 500 x 2000 mm weight: 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase electric motor ELECTRODRIVES LIMITED Type DE71 0.55 kW 2800 rpm 220 - 240 / 380 - 415 V 3AC IP55 Shaft diameter: Ø 14 mm used, tested ! Dimensions: 235 x 130 x 185 mm

Single Single SKA 3 – L Liquid Cooling Original price 5.891,- € Application: All applications that require liquid cooling are served by the cooling systems and equipment of the SKA series. With their own refrigerant circuit and a huge range of cooling capacities, they are used in all industrial sectors Device type: SKA 3 – L Refrigerant: R 134a Cooling capacity: 3,000 W Reference values for cooling capacity specifications: 10°C flow temperature 30°C ambient temperature Temperature range: -5°C to +30°C Equipment: Control unit SBC: Digital display of setpoint and flow temperature, alarm indicators and many other features PT 100 resistance thermometer and sensor breakage protection Stainless steel tank, capacity: 16 liters Corrosion-resistant components (stainless steel/non-ferrous metal) Level monitoring by float magnetic switch High and low pressure ...

Flow Relief Valve, 2-Way Flow Limiting Valve, Hydraulic Valve, Bottom Plate Mounting ORSTA 10-01.11 TGL 26244 / 40 Nominal flow rate: 40 dm3/min ( 40 l/min ) Nominal pressure: 32 MPa (320 bar) Adjusting device: Control knob with scale and lock ! two keys Base plate: 102 x 95 mm hole spacing: 83 / 76 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 102 x 95 x 106 mm

Flow Relief Valve, 2-Way Flow Limiting Valve, Hydraulic Valve, Bottom Plate Mounting ORSTA 10-01.11 TGL 26244 / 40 Nominal flow rate: 40 dm3/min ( 40 l/min ) Nominal pressure: 32 MPa (320 bar) Adjusting device: Control knob with scale and lock ! two keys Base plate: 102 x 95 mm hole spacing: 83 / 76 mm hole diameter: Ø 9 mm New ! Dimensions: 102 x 95 x 106 mm

Flow Relief Valve, 2-Way Flow Limiting Valve, Hydraulic Valve, Bottom Plate Mounting ORSTA 10-02.11 TGL 26244 / 40 Nominal flow rate: 40 dm3/min ( 40 l/min ) Nominal pressure: 32 MPa (320 bar) with check valve Adjusting device: Control knob with scale and lock ! two keys Baseplate: 102 x 95 mm hole spacing: 83 / 76 mm hole diameter: Ø 9 mm New ! Dimensions: 102 x 95 x 106 mm

Valve interlinking unit ORSTA EV 10 - 08 / 1 TGL 26263 / 20 nominal pressure: 32 MPa flow limiting valve SB 10 - 21. 01 / 0 TGL 26245 / 20 Dimensions: 160 x 90 x 65 mm

Wentzky 4R150 (Graessner), lapping machine, dia mm 1500, 4 rings (I.D. 535 mm), This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.or ...

Valve chaining unit with key ORSTA 10 - 05 TGL 26265 / 20 Nominal pressure: 32 MPa Flow limiting valve 10 - 02.11 TGL 26244 / 20 New ! Dimensions: 170 x 110 x 55 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 117000 € : 125 to : 500 mm : 800 x 400 mm : 900 x 600 mm : 600 mm : 300 mm : 115 mm/s : 42 mm/s : 7 mm/s : 70 mm/s : 15 kW : 1400 mm : 1950 mm : 2600 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal fan, centrifugal fan, centrifugal fan CBI HD 33 GR1 2905 rpm Impeller diameter: Ø approx. 540 mm inlet: Ø approx. 130 mm outlet: 150 x 70 mm Motor : 4 kW 380 - 420 / 660 - 720 V suitable flow limiter S1236 ! High pressure blower with thermal insulation ! used, tested ! Dimensions: 910 x 510 x 1050 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 72500 € : 35 to : 500 mm : 700x350 mm : 700x500 mm : 600 mm : 250 mm : 125 mm/s : 43 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1400 mm : 2300 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference standard LÄNGENMESSTECHNIK Limbach Oberfrohna TGL 13619/1 Nominal diameter: Ø 5 mm Deviation from nominal diameter: ± 1 - 100 μm 75 pcs Class 4 Total length: 59 mm, measuring range: 21.5 mm im Holzkasten New Dimension: 250 x 210 x 75 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 89700 € : 85 to : 500 mm : 700x400 mm : 800x600 mm : 600 mm : 300 mm : 105 mm/s : 41 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 1200 mm : 1600 mm : 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.