lighting used for sale

Key data: 700 mm

CNC lathe GILDEMEISTER CTX gamma 1250 With control control Siemens 840 D SL with Shop Turn Year of construction: 2009 Travel in X: 480 mm Travel in Z: 1300 mm Spindle bore: 102 mm Turning diameter max. 700 mm Speed range: max. 2500 rpm With the following accessories: Slide protection with interior lighting (automatic sliding hood operation) 12-speed turret with 12 driven tool stations 50 tool holders VDI 50 3 Driven Angle Heads, 2 Driven End Heads C Axis & Spindle Brake (Hydr.), Partial Hollow Clamping Device Tension Tube 104 mm 3 Jaw chuck SMW Autoblock hydraulic (0 500) Direct Displacement Measuring System (X Axis) Tailstock with quill Signal light 4 coloured DMG Netservice on board Coolant system 980 l 8/20 bar with belt filter system Conveyor Coolant spray gun Operating instructions

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Impact machine stirring machine Rego Model: SM 3 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 1,5 kW,16A-CEE plug Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Impact machine stirring machine Rego Model: SM 3 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 1,5 kW,16A-CEE plug Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Impact machine stirring machine Rego Model: SM 3 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 1,5 kW,16A-CEE plug Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Impact machine stirring machine Rego SM 3 E / SM 2000 overhauled with automatic timer 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft new Boiler stroke electric Boiler lighting Connection 400V, 16A-CEE plug Used machine overhauled

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

Stirring machine Rego Model: SM 4 Impact machine 40 liters 2 working functions (1x stirring / 1x beating), boiler lighting, 1 stainless steel boiler 40 liters new 1 new whiter 1 new whipped beating Infinitely variable power adjustment and rash adjustment, Manual boiler height adjustment New wave of work DGUV V3 tested Connection 400V, 2 kW, 16A-CEE plug Dimensions: 680 x 720 x 1710 mm Used machine overhauled with 6 months warranty.

GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmDie and Mold Package linear incl. B-/C-TorqueDie and Mold Package linear incl. B-/C-Torque Dynamic package V-type Eagle timing belt for Z axis Torque table B-/C-axis including ATC AVD - Heidenhain or MVC - Heidenhain (starting NC 340590 11) APC and Top Speed - Siemens High End cooling unit for machiSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min- ...

Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...

Storage platform 150 m² with pallet rack Dimensions approx. 15000 x 1000 mm (150 m²) Platform height: 4700 mm Base plate thickness: approx. 40 mm Load capacity of the floor: 500 kg/m² 800 mm deep frame for transverse storage of Euro pallets green lacquered, welded truss Very stable plug-in system Frame 4700 x 800 mm Rows of shelves: 12 x 7200 mm Shelf depth: 800 mm 6 fields per row 3 - 5 levels per field Field width: 1200 mm Steel staircase with grating steps Stair width: 1100 mm Lighting system You can find more mezzanine floors in other sizes - new and used - in our shop! International shipping costs on request!

Stirring machine Rego Model: SM 4 Impact machine 40 liters 2 working functions (1x stirring / 1x beating), boiler lighting, 1 stainless steel boiler 40 liters new 1 new whiter 1 new whipped beating Infinitely variable power adjustment and rash adjustment, Manual boiler height adjustment New wave of work DGUV V3 tested Connection 400V, 2 kW, 16A-CEE plug Dimensions: 680 x 720 x 1710 mm Used machine overhauled with 6 months warranty.

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 20-1/1 Electric model with 20 shelves GN 1/1 New is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The super-fast intermediate and self-cleaning keep your device squeaky clean. It is a young used combi steamer from 01/2023. The RRP is € 25,520 net Availability: available directly from stock in week 09/2024 The indicated price is gross incl. 19% VAT. Service: We would be happy to provide you with a certified Rational customer service from master craftsmen, within a radius of approx. 100 kilometres from our location (postal code: 35418) Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether S ...

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

sheet width: 3050 mm plate thickness: 4 mm cutting angle: 1,5 ° table width: 530 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 4100 kg dimensions of the machine ca.: 3,63 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 Hub/min oil volume: 310 ltr. cutting angle: 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 12200 kg range L-W-H: ca. 4100 x 2300 x 2235 mm -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

cutting length: 3100 mm cutting thickness: 10 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Weight: approx. 10,000 kg

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...

SCHUCH Hall Lighting 3066 / 400 Wide Spotlight - Mirror Reflector Lamp 3076 / 400 Downlight--Mirror Reflector Lamp 1 x HME 400 W IP20 lamp room with glass 230 V / 50 Hz can also be operated with LED lights.

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Technical data Glass table: Length: 175 x 75 mm Various accessories: Episcopy lighting Screen:: Ø 200 mm Exchangeable objectives: 8 x

Concrete spraying machine Manufacturer Montanbüro Type e.B. Elefantion Unused! Other unused and used concrete spraying machines in stock Also water pumps with e.B. Centrifugal pump Flow rate 150m³ at head 750m! If you are interested, please ask! Other machines: 216 TIG welding machine Dalex TGKW 352 AC/DC 217 Dalex LDE 400 inert gas welder 218 Welding fume extraction Dalex 64111 222 items of rotary/butterfly valves 228 items filter mats for building material plants 229 items Control cabinets 230 3 items submersible pumps 231 2 submersible pumps DV80ABS 233 Centrifugal pump LHK 125x10 SE G150 234 compressed air predatory winches pulling force 10to 235 Concrete spraying machine Aliva 237 Concrete spraying machine Aliva 238 11 centrifugal pumps 240 2 high pressure pumps TP 300/42/48 213KP pneumatic 241 4 lifting/trasn sport beams pneumatic, 2x30/40 kN, witho ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

5 pieces available Refrigerator & freezer Year of construction approx. 2013 Switchable temperature ranges: cooling +4 to +15°C or deep freezing -18 to -23°C Connected loads 230 V / 429 W with electronic temperature display Ready to plug in with interior lighting incl. interior border grille REFRIGERANT - R290 with Auto Defrost Panoramic glass / round glass lid External dimensioning External width in mm 1850 External depth in mm 855 Exterior height in mm 770 Interior dimensioning Interior width in mm 1720 Interior depth in mm 720 Interior height in mm 655 Gross capacity approx. 800l

I'm planning to part with my super, fully functional gas forklift. Metal body, super stable. Compactly built, yet with an enormous lifting height and load capacity. It still belongs to the generation of robust working machines. Gas drive. No leaks in the hydraulics. New rollers in the lift mast. Lifting mast tested. — Clark forklift CGP 30. — YOC '98 — Load capacity of 3 tons. — Lifting height of 5.52 meters. — Triplex mast. — Side shifts. — Safety windscreen. — Windshield wipers. — Lighting. — Rear hazard lights. — Additional 2 exterior mirrors. — In addition, a total of 3 pairs of forks. 1x 1.2 meters 1x 1.8 meters 1x 2.4 meters partly as good as new. Crack test carried out, everything was great. — Load guards. — Safety driver's cage with plexiglass. — Includes manual. Signs of wear, paint worn, seat area worn through, lit ...

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 10-1/1 Electric model with 10 shelves GN 1/1 is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The device has been tested in our in-house specialist workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The RRP. amounts to 15.090 € net The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional and competent advice - before and after the purchase •Free shipping within Germany (excl. islands/mountain stations) • Pr ...

Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: completel ...

UK Power Generators Ltd is selling the Caterpillar G3516B with 1.1 MW and 2004 is the year of manufactured. This is a containerized package, with the following specification details: Machine Model G3516B Year of Manufacture 2004 Power Output 1100 kw Fuel Gas Condition Used RPM 1500 RPM Frequency 50 Hz Voltage 400 V Location United Kingdom Containerized Complete Containerized Package If you are looking for a great reliable source of energy to enhance your business, production and lighting people homes with affordability. Choose us, for your energy needs to be sorted. The container has very high specs, and the transformer is included in the containerized package. The transformer is Step up 400-11000 V. Contact us with your company details and further information at: Infoukpowergeneratorsltd

This is a combi steamer from the manufacturer Rational, type CM 61 in electric version. The pictured base is not part of the offer, but can be purchased as an option. The combi steamer has been overhauled in our in-house workshop and the device is fully functional. Our used equipment service for you: •3 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Modes: •Hot air 30°C to 300°C •Combination of steam and hot air 30°C to 300°C •Vario steaming at 30°C to 99°C •Finishing •Steaming at 100 ...

CNC control: Siemens SINUMERIK 828D incl. OPERATE, 10.4" screen -Spindle cone BT 40 -24-fold tool changer -Coolant device 10 bar incl. coolant gun -Internal cooling with 20 bar -Warning light with 3 colors -Chip conveyor, ejection from the side -Electric handwheel -Air pistol -LED workspace lighting -Oil skimmer with endless belt -DXF Reader -Advanced operating functions -CE conformity -English machine manuals -Blum Workpiece and Tool Measurement Technical specifications of the SMEC PCV 430 Workspace X-axis travel: 700mm Y-axis travel: 430mm Z-axis travel: 510mm Table size: 750x420 mm Distance table – spindle nose: 130-640 mm Table load: 560 kg Final drives Feed motor X/Y/Z axis: 3 kW Rapid traverse X / Y / Z: 48/48/36 m/min Feed X / Y / Z: 1-20,000 mm/min Spindle Spindle motor: 11/20.4 kW Torque: 95.5/130 Nm Speed: 10,000 min-1 Tool magazi ...

Equipped with foot control and lighting

equipped with: lighting, clamping table, 320x300, protective cover,

Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.

Working width: 3000mm, weight: 1.95t, with wheel loader attachment quick change attachment with rollers level compensation, water spray device 400l complete with 12V pressure pump and on/off switch, pressure pump 24V for water spray device, water spray device for side brush, flag holder incl. warning flags and warning marking and LED lighting device according to StVZO, the machine has not been used.

The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.

sheet width: 2550 mm plate thickness: 3 mm cutting angle: 1,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 2400 kg dimensions of the machine ca.: 3,14 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 175 mm - 12 drilling spindle speeds 120 – 3000 rpm - Projection 290 mm distance between drilling spindle and table / base plate 630 / 1190 mm - Table with 2 T-slots 570 x 475 mm Height-adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Machine vice - Quick-release drill chuck 1-13 mm - Lighting

aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication

Impact machine stirring machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Impact machine stirring machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Spiral Kneader Model: SM 60 Kneading machine with robust technology! Digital easy Touch Control with dough temperature display Dough machine with 2 timers Boiler lighting for min/max. 2 - 40 kg dough Flour dust hood Stainless steel boiler with 60 liters Machine mobile with 2 locks with EMERGENCY circuit DGUV V3 tested Connection 400V, 2.4 kW, 16A-CEE plug Dimensions: 600 x 980 x 1090 mm, WxDxH NEW Machine With 24 months warranty Come in our bakery machines sale!

Spiral Kneader Model: SM 85 Kneading machine with robust technology! Digital easy control with dough temperature display Dough machine with 2 timers Boiler lighting for min/max. 4 - 60 kg dough Flour dust hood Stainless steel boiler with 85 liters with EMERGENCY circuit Machine mobile with 2 locks DGUV V3 tested Connection 400V, 3.5 kW, 16A-CEE plug Dimensions: 620 x 1030 x 1180 mm, WxDxH NEW Machine With 24 months warranty More bakery machines can be found in our large warehouse!