light used for sale

<b>Properties</b> Used pallet roller conveyor of the manufacturer of rack & roll GmbH Condition: Excellent condition with light wear Color: Silver Feet must be ordered separately Expertly disassembled and packed Pre-assembled on a length of 2,640 mm Including a drag reel per item Price per meter <b>Technical data Pallet roller conveyor dimensions approx.</b> Total length of an element: 2,640 mm Total width: 930 mm <b>Mass of the rollers and the frame about</b> Clamping length approx.: 835 mm Diameter approx.: 60mm Distance approx.: 150mm Material: Steel, galvanised Frame: 80x40mm Brake pulley diameter: 90 mm In stock: 140 metres <b>Pallet roller conveyor</b> Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.  ...

Technical data: -maximum cutting width 3050 mm -maximum cutting capacity at 45 KP / mm² 4 mm -hydr... Cutting angle adjustment - number of holders of 18 PCs -Speed up to 24 / min -front angle stop 1100 mm -3 PCs front support arms 750 mm -mot. Backgauge positioning control 5-1000 mm - sheet reversible - cutting line illumination -E - foot switch -Rear area protection with light barrier -Drive 400 V / 9.5 kW -Space requirement approx. B 3900 x H 1850 X 2100 mm -Weight approx. 5.7 t

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

Used compressed air container storage facility, in top condition Compressed air system fully installed in a 20 ft steel container, 2 x Boge VLEX screw compressors with 65 KW (overhauled a year ago, new screw elements, engines newly stored, new shooter and completely new compressor control, with overarching control. Delivery quantity at maximum maximum maximum press 10 bar 2 x 9 m ³/min, free to control with 2 x 9 m ³ or together 18 m ³/min. In addition, in the container is a built-in container with 500 lite, a cyclone separator, Beko cold dryer type. RA, and compressed air filter 2 fold, Mirco filter and activated carbon filter, condensate treatment is done via an oil water separator. The too and exhaust air are discharged via ventilation ducts, and can be sealed with electrically motor locking flaps. Container includes 4 electric heaters (thermostat controlled), and an electric sub ...

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 118(160) @ 2200 kW(ps)/rpm Medium Duty - kW(ps)/rpm Light Duty - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Dauerbohrleistung: 25 mm Standard ALB ear performance: 30 mm Thread cutting performance: M 14 (option) Spindle: MK 3 Drilling depth: 130 mm Throat depth: 250 mm Infinitely variable spindle speed: 230-2700 RPM Table size: 460 x 360 mm Column diameter: 100 mm Total height: 1800 mm Weight: 230 kg Power supply: 400 v, 50 Hz Motor power: 1,5 kW Facilities: -Digital display for speed as standard -Light machine -Stepless speed adjustment with digital display -24 V electrical system -Height-adjustable spindle protector -Base plate with T-slots -Drilling table rack with worm gearbox - adjustable and swiveling around column -Reversers for R/L rotation (option gg. Extra charge) -Emergency off pushbutton -Motor protection -Star handle -CE compliant

Collman Buffing / Building / Peeling Machine Ref: RB007 Year 1980’s 50 volts 50 cycles 20kw Manual peeling, buffing, building Good for PCR truck and Light OTR tyres Latest standards

Crack Control Panel type EOK Through light control for detection of hairline cracks in the foil before filling

TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...

Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG) Purpose: Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG / 10 KN maximum load). Without distance measurement. Manual lifting spindle press - Static pressing force 5 KN (0.5 to) - Portable, stable press frame made of polyamide PA 6G - Manual spindle stroke gearbox with spindle 20 mm, incline 5 mm - With handwheel diameter 120 mm and handle - Gearbox reduction 1: 10, per handwheel revolution 0.5 mm spindle path - This requires only very low hand force. - Table size 235 195 mm - Light width 190 mm - Stamp size diameter 70 mm - With 4 holes 8 mm for fixing a larger stamp plate - Very easy to operate by spindle and worm gearbox - Total weight approx. 25 kg Force measuring device: Weighing module with shear rod load cell for nominal load 1,100 kg.  ...

-Engine power 7, 5kW -30to cutting force Cutting channel designed for -maximum roll length 1500 mm -maximum roll diameter 1200 mm -Machine weight approx. 3000 kg -Tank capacity ca. 100Liter -Hand guards in the area of the control panel and to present -Splitting er table straight version Documentation 2 German (1 x writing, 1 x CD) Being body RAL 7035 light grey Guards/blade RAL 1028 melon yellow Ibkah3p Machine in production / available from 04-2019 Price and further details on request

Tragrolle(n) industrial-grade diameter 80 mm length 500 mm steel ball bearings loads up to 200 kg Support rollers are suitable for heavy duty roller conveyors, roller supports, machine feeders etc. the roles are used but undamaged and have some light surface rust. the entire length of a roll is approximately 540 mm, the shaft has a diameter of 14 mm and an Aussparungvon ca. 10 mm on the shaft ends

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

ISM Shibaura N843L, 3-cylinder water-cooled diesel engine, displacement 1,662 cc, power 26.1 kw/35 hp/2,700 1/min., functional. We supply diesel engines 1-6 Zyl., various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Performance of 4.5 to 100 kw, used, partly new. Gasoline engines: 1-2 cylinders of 3-15 kw from B & S, Honda, Kohler, Robin, Wisconsin. Various coolers, starters, light machines and silencers in stock, hydraulic pumps and hydraulic motors. Jodau Kommunal-, Umwelt- & Grünpflegetechnik Inh. Joachim Dau 24941 Flensburg, Wieselhof 29

Light barrier with transmitter and receiver Range 0.3-7.0 m, protective field height 410 mm, resolution 14 mm, reaction time 10ms, voltage 24 V ,,400mA,IP67,-10°-50° C

TECHNICAL DATA: Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 2,000 watts Max sheet thickness structural steel: 20 mm Max sheet thickness stainless steel: 12 mm Max sheet thickness Aluminium: 8 mm STANDARD EQUIPMENT: â?¢ Closed machine frame with integrated laser unit â?¢ TRUMPF laser TLF 2000 â?¢ Laser unit: CO2 laser, high-frequency excited, cooling unit, logbook function â?¢ Automatic pallet changer and laengsfoerder tape â?¢ Drives: maintenance-free three-phase servo motors â?¢ Laser power control â?¢ HI-LAS high-pressure cutting â?¢ Plasma sensors PMS â?¢ Fast processing with SprintLas â?¢ ContourLas for the production of small loechers â?¢ Cutting gas pressure adjustment programmable â?¢ La ...

Lid FP 2 NC Used machine (good condition) Control type NC Built in 1987 Operating hours n/a Price 9,900 € net plus VAT Dimensions 1325 x 1315x 1845 Weight 1450 kg Location 35708 Haiger The machine was part of a training workshop, it is made of 1st hand and has few hours of operation. Travel routes; x = 300, Y = 300, Z = 400 mm Speed range: 31.5 - 3150 rpm DESCRIPTION CNC milling machine lid FP 2 NC year: 1987 Control: 3-D web control dialog 4 Can also be operated manually via handwheels Travel paths; x = 300, Y = 300, Z = 400 mm Voltage: 380 volts Speed range: 31.5 - 3150 rpm power, 1.6/ 2.0 kW WZ recording, SK 40 Hydraulic Tool Clamping Rigid Angular Table Table Size: 620 x 390 mm Electronic handwheel Coolant device Machine light Spray protection cabin Accessories: operating and programing instructions, electrical circuit diagrams, WZ-holders Weight: 1450 kg Dimensions: L  ...

Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...

Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...

Sieve drum machine Trützschler SF144 used for the processing of cotton fibres and similar fabrics. Manufacturer: Trützschler Type: SF144 with hose filters, each 15 hooks of 200 mm left and right In the middle of the machine is the sieve drum (length 1,200 mm approx. 500 mm), with fine stainless steel sieve fabric, clamped on square screen basket. Machine was used for separating/filtering cotton fibers and other light fabrics. with fan Dimensions filter box: 850 x 1,500 H 1,100 over frame, H with frame 2,300 mm Total space requirement: 2,300 x 2,000 H 2,800 mm 2 identically available. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...

Figure shows precision flat grinding machine: FSM 2550 AH Table size: 300 x 600 mm Installation height: 500 mm Max table load: 300 kg Engine power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All castings, such as machine stand, table, etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross-stroke device - Rear splash protection - Grinding wheel - Grinding wheel flange - Pulling device - Balancing mandrel - Balancing scales - Dressing diamond - Machine light - Nivilier elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic verti ...

Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm

1 new Holtec PICCOLO the Piccolo is handy, precise and flexible. mobile parcel crosscut saw in light design, e.g. for cutting and finishing on sawn timber packages Chain set with STIHL chain Type Rapid Super 0.404" for extremely fine surfaces and two-sided adjustable guide rails (can be used four times) Electric motor 7.5 kW great cutting performance for packages up to 1.15 m x 1.15 m and roundwood diameter up to 1.30 m Sword Length: 1.60 m

Machine No.: 3857-006 Programs, Side Tables, Light Bariers, Air Table, Standard Accessories

Schmidt Tempo ASG 2000 Saw blade grinding machine up to 2,050 mm technically overhauled and repainted in 2019. Equipment and accessories: â?¢ Saw blade holder of 250 mm with centering bolt 32 mm, hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ Centering rings bore 32 mm, outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm Diameter, 32 mm bore â?¢ Large working light â?¢ Interchangeable wheel scissors with interchangeable wheels for need. Tooth numbers Technical data: â?¢ Grinding range 315-2050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm â?¢ Saw blade thickness maximum 20 mm â?¢ Stroke numbers continuously 21-126 Z/min â?¢ Connection value approx. 4.5 kW (400V / 50 Hz)

Saw blade grinding machine up to diameter 3,000 mm Model Schmidt Tempo ASG 3000 2019 technically overhauled and repainted â?¢ Grinding range 315-3050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm - saw blade thickness up to 20 mm â?¢ Stroke numbers continuously 21-126 Rpm - Connection value approx. 4.5 kW (400V / 50 Hz) â?¢ Saw blade holder of 550 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 2 centering rings bore 32 mm outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large LED light, good illumination, reduced heat formation â?¢ Interchangeable wheel scissors with the interchangeable wheels for common number of teeth Illustrations: Schmidt Tempo ASG 2000.  ...

McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)

Pass height max mm: 2000 Battery: 24V Chargers: automatic and high-frequency Automatic reading of the charging height: Reflective light barrier Total power: 0.75 KW

Properties: Pressure-free Used roller conveyor Condition: good (used) Feet to order separately Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 24V technology Incl. sensors and light barriers (pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Pressureless storage pressure Drive: 24V technology Total width approx.: 740mm Conveyor width: 655 mm Roll division: 75mm The system consists of 6 segments: 3x 2,250 mm each 3 drive rollers 2x 540mm 1 drive roller each 1x 2775mm 5 drive rollers each information on the frame Height: 150mm Width: 40mm Max weight of the conveyed material 50Kg Roller railway The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal pr ...

Spectro material analyzer mobile Neyy2 Type Spectrotest JR Capable of analyzing light elements in spark mode, the SpectroTest was built for use in the shop or in the field. Arc or spark excitation is available as well as a UV probe for carbon, phosphorus and sulfur analysis. More data on request

Properties: Used roller conveyor Condition: good (used) Feet to order separately Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 24V technology Incl. sensors and light barriers (pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Pressureless storage pressure Drive: 24V technology Total width approx.: 540mm Conveyor width: 455 mm Roll division: 75mm The system consists of 7 segments: 7x 1,650 with 2 drive rollers each information on the frame Height: 150mm Width: 40mm Max weight of the conveyed material 50Kg Roller railway The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the roller conveyor can convey sensitive and dif ...

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

Register punch Citonak VS 66, with light barriers, machine number 1211, in good condition, immediately available If you are interested, we will be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

READY TO SHIP Conveyor belt conveyor belt conveyor Alu conveyor belt different versions available: 6m, 4.5m, 3.3m length (longer distances on request) For rent included: - Mobile conveyor belt - Removable chassis - Connection cable Our conveyor belts are light, handy and powerful! For the rapid removal of e.g. earth, construction debris, etc. Transport up to 300 tons of material per day! For RENT and BUY, prices on request. Material can be visited, from Mon-Fri 8am-4pm. Transport on request, also self-collection possible (loading at our warehouse FREE) Please also take note of our other offers ! Rent formwork, containers, scaffolding and many more from LERCH!

Sell a solid grinding buck for grinding e.g. turning steels Left and right a swinging table that is moved manually over a hebl. The table has the dimensions 400mm200mm, and can be swivelled +/- 10°. The swinging table can be moved by handwheel, to the grinding wheel and away from it Mass grinding wheels diameter approx. 200mm50mm wide Speed 1400 / 2800 rpm KW 0.6 PS 0.8 Connection voltage 400V Dimensions 8505001200mm High Accessories: Working light Various grinding wheels and keys

READY TO SHIP Conveyor belt conveyor belt conveyor Alu conveyor belt different versions available: 6m, 4.5m, 3.3m length (longer distances on request) For rent included: - Mobile conveyor belt - Removable chassis - Connection cable Our conveyor belts are light, handy and powerful! For the rapid removal of e.g. earth, construction debris, etc. Transport up to 300 tons of material per day! For RENT and BUY, prices on request. Material can be visited, from Mon-Fri 8am-4pm. Transport on request, also self-collection possible (loading at our warehouse FREE) Please also take note of our other offers ! Rent formwork, containers, scaffolding and many more from LERCH!

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Conveyor belt Flat belt conveyors, Conveyor belt Conveyor railway Length: about 3m Bandwidth: 50 cm SEW GearEd Motor 6 feet, adjustable 1x Light barrier For more data see also type plate photo All information without guarantee

Printshop from one place in germany as package: guillotine cutters Manufacturer: PolarMohr Model: 92E Year: 1998 Price: on request Lift Manufacturer: PolarMohr Model: L-450-W-1 Price: on request drilling machine (semi-automatic) Manufacturer: Constantin Hang drilling machine (automatic) Manufacturer: Constantin Hang gathering machine with stitching automat Manufacturer: Müller-Langenfeld Model: 620 Year: 1993 Manufacturer: Müller-Langenfeld Model: 91 Year: 1992 Manufacturer: Heidelberg Model: GTO 52/2 Plus Year: 1996 bending machine- Car Manufacturer: Heidelberg Model: Multiplate HDM Year: 1999 plate punch HDM Manufacturer: Heidelberg Year: 1998 Manufacturer: Heidelberg Model: (Creo-)Trendsetter 3244AL folding machine Manufacturer: Steel Model: K66.3/4KTL-FB2 stitching machine Manufacturer: Agrafix Model: BX stitchin ...

working range without repositioning X: 2535 mm working range Y: 1300 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2200 Watt Plate thickness max.: 8 mm Beam on: 4.390 h Standard equipment: - Work range X-axis 2535mm for combined operation - Hi-Las high pressure cutting - Laser-cutting head with 5’’ lens - head quick change device - Programmable cutting gas/Pressure settings - Capacitive height regulation - Compact dust extractor - 2 sheet clamps - automatic tool change with 19 stations (21 minus sheet clamps) - Full rotation of all tools - NC-controlled, maintenance free 3-phase motor - Repositioning device - quick shut-down of hydraulic system - automatic machine shut-down - tool length compensation - chutes for parts 500 x 500 mm - punching slug suction system - metal forming possible - tool spray lubrication - Programmable stripper - adaptive stroke lengt ...

working range without repositioning X: 3085 mm working range Y: 1740 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2400 Watt Plate thickness max.: 8 mm Beam on: 2.763 h Standard Equipment: - Working area for combined laser/punching 2585 x 1650 mm, for punching 3085 x 1740 mm, laser-cutting 3085 x 1650 mm each without resetting operation - HI-Las High pressure nitrogen cutting - laser head with 7,5 lens - programmable repositioning cylinders - quick stop function - Blow-out device for small parts - Safety light barriers - manual Additional equipment: - additional clamp and possibility to open one or a pair of clamps - Prepared for Multitool - Function tapping Automation: - TRUMALIFT SheetMaster FMC - sucker plate - Trumasort L - TRUMATOOL 40 - TRUMAGRIP New Resonator in 2011

X working range max .: 2500 mm Y Working range max .: 1250 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 2700 W Beam on: 21.335 h Plate thickness St. Max .: 20 mm Plate thickness Va. Max .: 6 mm Plate thickness Al. Max .: 5 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 3,75-Lense - Cutting head with 7.5-Lense - Cutting head quick change device - metal sheet position detection system - high dynamic Yp-axis - Laser position diode - Programmable cutting gas/Pressure setting - Microweld - SprintLas - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - shut-down automation - Safety light barriers - ToPs 100 lite programming system - online diagnose tool - RJ  ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 5000 W Beam on: 15.151 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 12 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 9-Lense - Cutting head with 7.5-Lense - Cutting head with 3.75-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - PCS Process Control System (monitored piercing) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - autom. Injection cleaner - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Co ...

working range: 1270 x 1270 mm Punch power: 180 KN Plate thickness max.: 6,4 mm Standard equipment: - Rotatable tool adapter - Autom. repositioning device with presser foot - Autom. Tool changer with 9 stations - 2 clamps - 9 cartridges - Part chute 200 x 200 mm with parts sorting into 2 containers - 2 part container - Brush tables - Multitool - Vaccum slug removal - Chip container - Rapid shutdown device hydraulic - TFT colour screen 10.4 - 3,5 disk drive - Graphic programming ToPs 2000 - Safety light barrier 2 radial - BNC and RJ45-network connection Additional equipment: - Function Tapping - Function engraving/rapid beading - Tool spray lubircation - Table extensions - Tool setting aid

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Beam on: 29.712 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 20 mm Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assem ...

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...