128,849 used machines on RESALE, but how to find them? Machine Search
Reflective light barrier, light barrier -Type: RK 85/7-300 -240 V AC Price: per piece Quantity: 3 available -Weight: 0.5 kg
Reflective light barrier -Type: WLL260-F240 -10-30 V DC -Weight: 1kg
Reflective light barrier, light barrier -Type: WL24-X2301 -Ui 15.5V Ii 53mA Pi 100mW Li 80uH Ci 80nF -Weight: 0.5 kg
Reflective light barrier, light barrier -Type: WT36-P710E02 -10-30 V DC -Weight: 0.2 kg
Reflective light barrier, light barrier -Type: WL 25-322 -24 V AC 48-62 Hz 6 VA -Weight: 2 kg
Reflective photoelectric sensor, optical sensor -Type: BES M08MD-GNX10B-EV02-EEX Quantity: 15 available Price: per package -Weight: 0.2 kg
Sale EXW ex works No shipping included
Stock number: R671, Agitator, stainless steel,, Lightnin model N33AG-33S., Air driven., D 25 mm. shaft, L 1680 mm., Mounted with D 250 mm. 3-bladed propeller., Material: Stainless steel AISI 304, Propeller size: D 250 mm.
Stock number: R524, Agitator,, LIGHTNIN mixer typer N33AG-33S,, air driven laterne., excl. axle and propeller.
Some without packaging Auction-ID: A1-45411-219
Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the
Attention: do not start Auction-ID: A3-43367-6100
Equipped with: 2x Li Light 150W and 1x Li 150W Auction-ID: A1-40104-78
Light Weight Impeller Impeller Wheel Size : 710mm Impeller Material : M/S S275JR Shaft Material : Carbon Steel Fan Shaft : OD 2-1/4” x 870mmL Shroud : 2mm Fin Support Ring : 2 mm Back Plate C : 4 mm Fin D : 2 mm Included Test Run by 3rd Party - Test run by 3rd party during blower commissioning at F42, the supplier will be present to witness the overall performance of the impeller. This is to identify any fault in the fabricated impeller. Included Balancing report - All wheels are dynamically balanced to ISO1940 or AMCA204-G2.5 standard, with reports provided.
Dimensions: approx. L 50.00 m × W 25.00 m × D 5.20 m / F 9.30 m (length x span × eaves height / ridge height) Year of construction: 2012. Roof shape: gable roof, roof pitch 18° degrees. Condition: used with signs of use. Anchoring: Ground Nail Anchoring. Construction & Equipment: Supporting structure: Double-hinged frame IPE 270 (S 355) with FL 80x15 tension strap. Gable frame with additional gable supports (IPE 180 S 235). Roof covering: trapezoidal profile. Facade: Trapezoidal profile. Substructure: Purlins & wall beams made of cold-finished hollow sections. Bracing: Rope diagonals with turnbuckles. 8 roller shutters (approx. 3.00 x 3.00 m). 4 emergency exit doors (approx. 1.00 x 2.00 m). Continuous rooflight on both sides for good daylight conditions. Load assumptions: Snow load: 0.75 kN/m²; Wind load: 0.50 kN/m². Documents: The construction documen ...
Article No.: 91256 // S. No.: 91228 Work Surface: 48,3 cm W x 34,3 cm H
maximum number of results exceeded
please refine your search
10 € 
