light tube used for sale

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu bar material - diameter: 30.0 mm wall strength: 2.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS  ...

tube diameter: 273 mm wall strength: 15,1 mm bending radius min.: 150 mm bending radius max.: 1250 mm total power requirement: 30 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft diameter: 40 mm bending speed: 10 U/min : 2 x 3,2 bending capacity - angular iron: 50 x 50 x 6 mm total power requirement: 1,85 kW weight of the machine ca.: 280 kg dimensions of the machine ca.: 560 x 980 x 1430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm : 60x3 mm : 35 mm : 64x4 mm : max. 210 ° : R10-R300 bending speed: 1,25/2,5 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 bending speed: 2,5 U/min : 54,0 x 2 mm Sheet thickness aluminum: 54,0 x 2 mm : 42,4 x 3 mm sheet thickness for stainless steel: 42,4 x 2 mm : 30 mm : einphasig - 230 V drive motor: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 363 x 900 x 595 mm ‘ERCOLINA MEDI BENDER’ Single-phase mandrel-less bending machine up to 42 mm Features: - Control system: Soft-touch control panel in 8 different languages - Number of programs: 30, each with 9 bends - Standard accessories (including foot switch, user manual) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EWAG RS 15 Conventional Grinding Machine TECHNICAL FEATURES: X-axis travel: 490 [mm] Y-axis travel: 130 [mm] Z-axis travel: 115 [mm] Spindle power : 2.2 [kW] B-axis angular travel: 260 [°] Workpiece Spindle Nose: HSK 63 Inverter speed drive: Yes Visualization: RSF-Elektronik Visualization number of axes: 3 Irrigation tray capacity: 100 [l] Centralized Lubrication: Yes Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight 1850 [Kg] Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, including truck loading. Possibility of shipping throughout France as well as internationally. More photos and details on request. Technical description for information purposes only, without obligation on our part. Machine for sharpening tools, milling cutter, tap and drill. Mach ...

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EWAG RS-15 Conventional Grinding Machine TECHNICAL FEATURES: X-axis travel: 490 [mm] Y-axis travel: 130 [mm] Z-axis travel: 115 [mm] Spindle power : 2.2 [kW] B-axis angular travel: 260 [°] Workpiece Spindle Nose: HSK 63 Inverter speed drive: Yes Visualization: RSF-Elektronik Visualization number of axes: 3 Irrigation tray capacity: 100 [l] Centralized Lubrication: Yes Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight: 1850 [Kg] Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, including truck loading. Possibility of shipping throughout France as well as internationally. More photos and details on request. Technical description for information purposes only, without obligation on our part. Machine for sharpening tools, milling cutter, tap and drill. Mac ...

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter 60mm. Includes 18x length 3000mm Auction-ID: A1-49875-162

Height 80mm Auction-ID: A1-49875-161

Diameter 60mm Auction-ID: A1-49875-160

Tube cutting machine manufactured in 2020. This Bodor X2260 features a powerful 3 kW laser and is equipped with a CNC control panel interface, automatic chuck system, and a dedicated extraction system. It also includes a tube support roller and conveyor loading bed for enhanced efficiency. If you are looking to get high-quality tube cutting capabilities, consider the Bodor X2260 machine we have for sale. Contact us for further details.

tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included Additional  ...

tube diameter: 60.3 x 4.5 mm ST tube diameter: 60.3 x 5.4 mm ALU tube diameter: 2 x 3.91 mm GAS bar material - diameter: 35.0 mm revolutions per minute: 2.0 U/min bending radius min.: 10.0 mm bending radius max.: 270 mm external diameter: min. 5.0 mm external diameter: min. 1/8 Zoll voltage: 230 V total power requirement: 1.5 kW weight: 76.0 kg range L-W-H: 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model M = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 1400 / 2800 U/min tube diameter: 40 - 140 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request - Machine video - identical machine - https://www.youtube.com/watch?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal  ...

tube diameter: 16.0 - 90.0 mm width of the strips: 100 mm band length: 1250 mm grinding band dimension: 100 x 1250 mm total power requirement: 2.2 kW weight of the machine ca.: 180 kg. range L-W-H: 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use () New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport The  ...

CONTROLS   CNC controls BLM VGP 3D TECHNICAL SPECIFICATION   Max. diameter of tube: 28 mm   Max. wall thickness: 1.5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 3400 mm   space requirements -front/back-: 1100 mm   total height: 1500 mm   total weight approx.: 1850 kg Stainless steel max. 20 mm diameter CNC control with VGP 3D software

CONTROLS   PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE   external diameter min.: 8 mm   external diameter max.: 90 mm Round tube min. 8 mm            max. 90 mm Square tube min. 8x8 mm             max. 80x80 mm Rectangular tube min. 15x10 mm                  max. 60x85 mm

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 € : 216.96 € : 5 kW : 265 kg : 10-114 mm : 2 : 3-22 m/s : (2x) 50 x 940 mm to grind and polish for round and oval tubes opening of sanding belts by footpedal machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube: 6000 mm tube diameter: 42 x 3,0 mm wall strength: 3,0 mm bending radius min.: 150 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 7500 x 1.400 x 1.300 m Round steel tube: up to Ø 42 × 3.0 mm Round stainless steel tube: up to Ø 42 × 2.0 mm Square tube: 25 × 2.5 mm Max. section modulus: 4.1 cm³ Bending angle: up to 180° + 10° overbending Bending time at 90°: 2.7 sec. (forward stroke) Longitudinal feed speed: 450 mm / 1.5 sec. Rotary positioning speed at 90°: 1.0 sec. Repeatability of bending axis: ± 0.2° Controlled length tolerance: ± 0.3 mm Controlled rotation tolerance: ± 0.2° Tube loading length / usable length for mandrel bending: 4,100 mm Max. radius range: 150 mm Bending height: 850 mm Free-standing bending head: 850 mm long Bending axis drive: electro-hydraulic Rotation and length positioning: automatic via gear ...

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

PRODUCT (PROFILE, TUBE)   external diameter min.: 25 mm   external diameter max.: 76 mm   wall thickness min.: 0.7 mm   wall thickness max.: 3.25 mm LINE CHARACTERISTICS   welding process: HF inductive   sawing process: travelling   speed max.: 100 m/min ELECTRICAL SPECIFICATIONS   mains power supply: 680 kVA Technical data & highlights: System length: approx. 130 m Staff requirements: 6 employees for operation Welding process: High-frequency welding up to 400 kHz Induction welding process: Power up to 250 kW Advantages: Robust and reliable design – suitable for continuous industrial operation Precise welding quality thanks to state-of-the-art high-frequency technology Ideal for manufacturing pipes in various dimensions -Pipe welding machine: Abbey Etna -Strip processing + saw VAi Seuthe -Rolling mill Carl Wetzel -Induction welding system: Rittal SK3215.100, built in 2 ...

tube diameter: 6 - 42 mm wall strength: 3 mm bending radius min.: 180 mm bending radius max.: 5 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Equipment: Saw unit Notching unit Deburring unit for internal and external edges Flaring unit / flaring function (necking / expanding) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FEEDSTOCK TUBE   external diameter max.: 90 mm   lenght max.: 14000 mm CHARACTERISTICS DRAWING MACHINE   force: 250 kN   number of parallel trains / strands max.: 3 For Sale: High-Performance Triple Drawing Bench GKZ 250 / 3-19R – Precision, Power & Reliability Offered for sale is a Triple Drawing Bench, type GKZ 250 / 3-19R, manufactured by Bültmann Maschinenbau GmbH & Co. KG, a renowned German company known for high-quality tube drawing technology. This system stands out for its robust design, impressive pulling force, and flexible adaptability for a wide range of tube dimensions and materials. Technical Data Year of Manufacture: 1987 Manufacturer: Bültmann Maschinenbau GmbH & Co. KG Location: Hall 7 / 8 Floor Space: 6 x 35.5 m = 213 m² Installed Power: 355 kW Operating Personnel: 1 person Performance Specifications Number of Tubes per Draw: 1, 2 or 3 Input Tube Outer Di ...

Batch of 19 boxes of Thermaflex ThermaSmart PRO Coil tube insulation E-18/9. Diameter: 18mm Thickness: 9mm Length: 23m Auction-ID: A1-48529-110

Batch used 30x stainless steel vacuum tube / pipe from dockweiler. Auction-ID: A1-48529-154

This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details.

Used Buchi GKR-50 Glass tube oven with various extra glass parts Model: GKR-50 Manufacturer: Buchi Laboratoriums-Technik AG Voltage: 220 (50/60Hz) Includes box with extra glass parts (tubes, bottles, etc) Auction-ID: A1-48529-204

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - .ucymachines/ Contact us at - sales@ucymachines

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026.

Stock number: A212, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Amount of tubes: 27 pcs., Product tube diameter: Ø 1, Insulated: Yes, Heating surface: 4,03 m², Inner dimensioner: L 1900 x W 300 mm., Outer dimensioner: L 2050 x W 400 mm.

tube diameter: 406.4 - 1625.6 mm wall strength: 9 - 60 mm bending radius min.: - mm pressure: 10000 t tube: 8000 - 12000 / 16000 mm Plate thickness: 9 - 60 mm distance between columns: mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The HYUNDAI-WIA JCO Press Bending Machine is a heavy-duty industrial hydraulic press used to form large-diameter, longitudinally seam-welded (LSAW) steel pipes. Sequential Shaping: The machine bends a flat steel plate step-by-step into a pipe shape. It first presses the edges into a J shape, then curves them further into a C shape, and finally closes them into an O shape • Year of Modernization: 2025 1. Edge Milling Machine 2. Pre Bending Machine 3. In Feeder 4. JCO Press Bending Machine 5. Tack Welding Machne 6. Insdie Welding Machine 7. Outside Welding Machine 8. 4-way (Inpending) Machine 9. End Facin ...

: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 € : 122.59 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 € : 149.25 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...

With asortment tube holders, no power cord Auction-ID: A1-48959-163

Siemens control Center height 900 mm Maximum workpiece length 8,000 mm Min. workpiece length 2,800 mm Pneumatic spindle diameter 400 mm Two 100 mm abrasive blades Maximum cutting diameter 1,800 mm Suction connection Cutting carriage stroke 450 mm Central adjustable steady rest Floor space requirements: Length 10,000 mm Width 2,800 mm Auction-ID: A1-48745-19

With asortment tube holders, no power cord Auction-ID: A1-48959-162

With various accessories and qualification package Auction-ID: A1-49790-1273

General Description CNC fiber laser tube and profile cutting machine manufactured by Bodor / Jinan Bodor CNC Machine Co., Ltd. . Designed for precision laser cutting of round, square, rectangular and other metal tubes and structural profiles. The system features a long processing bed, powered rotary chuck and automatic tube loading/handling equipment. Technical Details Manufacturer: Bodor / Jinan Bodor CNC Machine Co., Ltd. Machine type: CNC fiber laser tube/profile cutting machine Bodor touchscreen CNC control Powered pneumatic/automatic rotary chuck system Automatic/semi-automatic tube loading and handling system Long tube support/processing bed Enclosed laser cutting section Extraction system Chuck clamping ranges depending on jaw configuration: 8–102 mm, 66–160 mm, 76–170 mm and 134–228 mm Dedicated Hanli HL-3000-QG2/2 fiber-laser chiller Chiller supply: 220 V ...

With various accessories and qualification package Auction-ID: A1-49818-1273

Batch of cable protection tubes consisting of 4x pallets. Diameter: 50mm. Length per piece: 50 meters. Quantity: approx. 10 pieces. Auction-ID: A1-49552-114

With stainless steel rack. Total approx. 90 pieces. Stock. Shelf size approx. L150 x W115 x H190cm. Auction-ID: A1-49846-24

Without stock racking. This is lot 40. Total approx. 600 pieces. Auction-ID: A1-49846-22

Tube Filling & Sealing Machine (Plastic) Manufacturer: SpeMaBa/Gustav Obermeyer Type: TUFÜBA 40 PE Year of Make: 2006 • For plastic tubes (HDPL, LLDPL) • Welding by hot air • 9 tube holder stations • Capacity max. 40 tubes/min • For tube Ø 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosage 20-220 ml depending on the dosing pump • 1 rotary vane dosing pump 10-100 ml (1 additional as a replacement) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling unit • Print mark control (alignment of the tube to the printed image) • Embossing 1-line • 2 tube holder format sets: tube Ø 25 mm, tube length 90 mm, tube Ø 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labeling machine 05-0179

: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 € : 209.28 € : 60 mm : 595 mm : 363 mm : 900 mm : 130 kg : 10.5 cm³ : 60 x 3 mm : 2Gas x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 4 mm : 60 x 4 mm : 64 x 4 mm : 64 x 4 mm : 60 x 4 mm : 50 x 4 mm : 35 mm : 60x30x4 stehend, 60x40x5 mm : 300 mm : 10 mm : 10 mm : 1,25 / 2,50 U/min : 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 239.23 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.