light tube used for sale

Used in Oil and gas exploration and Petroleum Refinery. The liquid flows through the bundle of tubes in a chamber where the exchange of heat occurs. It is mostly suited for high pressure applications. Two fluids flow through the chamber with different temperatures one through the tubes and other flows inside the chamber. A heat exchanger is a device used to transfer heat between two or more fluids. There are different categories of tubular heat exchangers; one of the most common is the shell and tube exchanger. A shell and tube exchanger consists of a number of tubes mounted inside a cylindrical shell. Two fluids can exchange heat: one fluid flows over the outside of the tubes while the second fluid flows through the tubes. The fluids can be single or two phases and can flow in a parallel or a cross/counter flow arrangement. The shell and tube exchanger consists of four major  ...

max. tube Ø: 6 - 48.3 mm Max. bending angle: 0 - 360° electr. Connection: 400 V, 1.8 kW Dimensions: 4200 x 1300 x 700 mm Weight: approx. 300 kg

Unused TGM model E250 Matic fully automatic stainless steel tube filling and sealing machine for Pharmaceutical, Cosmetic, Chemical and Food Industry products. Output Capacity: Upto 3,700 units/hour Metal Tubes: Diameter 10-42mm, Length 50-240mm Plastic Tubes: Diameter 10-50mm, Length 50-240mm Tube print orientation and sensor to detect tube right way up, minimises waste. Fold and roll crimping system for closing metal; polyethylene/laminate tubes sealed by hot air or hot jaws. Integrated ergonomic tube loading system, swings aside for easy access The machine is presently set up with hot air for plastic tubes and there is a brand new wrapped head supplied for aluminium tubes. Additional options included: Stirrer/scraper; Coding stamp; Product level control; Tube orientation system; Water cooler, Pharmaceutical product/data recovery system for recall of batch history  ...

Hot-air welding for plastic and laminate tubes • 1 filling station, capacity 600-2,400 tubes/h, the maximum speed depends on the format and product • Tube lengths 50-245 mm depending on format parts • Tube diam. 10-50 mm depending on format parts • Tube input chute semi-automatic • Dosing 1-300 ml depending on pump cylinder • 1 pump cylinder for 25-300 ml • Tube alignment according to print mark • Filling nozzle diam. 37 mm with blow-off function • Tube welding/encoding and cooling station • Tube cutting station • Format parts for tube diam. 50, tube length 161 mm, of which cap height 23 mm • Product container made of s/s ( not shown on photos) • PLC Texas Instruments model 425

Manufacturer Norden Model 700HA Year 1997 Condition Used Product id P90811014 Offers online 91 Capacity units/hour 4200 u/h Length x width x height 2000.0 mm × 1300.0 mm × 2200.0 mm Weight - State good At local norms --------- Status visible this extra information is standard for this model. Please always double-check the details during a visit The Norden 700HA Tube Filler is a reliable and efficient packaging machine designed for filling and sealing tubes with precision and speed. Manufactured by Norden, this model, produced in 1997, continues to offer dependable performance despite being used. With a capacity of 4200 units per hour, the Norden 700HA ensures high throughput, making it suitable for medium to high-volume production environments. Its compact footprint, measuring 2000.0mm in length, 1300.0mm in width, and 2200.0mm in height, allows for easy integration ...

Autom. tube filling machine for metal tubes. Machine incl. the following accessories: - heatable product container with level conroller - stirrer - coding device etc. Furthermore 4 pcs. format parts for tube Ø: approx. 13,5, 19, 25 and 30 mm.

The machine is in very good technical condition, approx. 60-80 engine hours worked, inspection possible by agreement. Technical data: Sheet thickness without pre-bending - 6mm Working length - 3100mm Diameter of the upper cylinder - 200mm Diameter of the side cylinder - 190mm Motor power - 4kW Description: The side cylinders can be tilted from the control panel Hydraulic motors are located directly on the cylinders without transmission The cylinders are hardened and ground The machine is adapted for conical bending The smallest rounded diameter is equal to 1.1 times the upper cylinder

Type: A89 TNCB Parameters: Manufacturer: CSM Taiwan Year of production / SO / GO: 2014 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Main parameters: Max bending angle 180 °. Largest profile 60x60x6. Max bending radius at the center of the TUBE: CLR 350 mm. Max bending radius at the center of the PROFILE: CLR 300 mm. Working mandrel range 3600 mm. Weight 2500kg. Dimensions: 4700x1200x1200 mm. Power consumption: 15 kW.

Type: DOROBEND DOB 32/90 Manufacturer: VEENEX v.o.f., The Netherlands Year of production: 2000 Location: Czech Republic Description: The machine is in good technical condition. Number of tubes bent at one stroke at a time: TR 32x2 mm: 1 TR 26x2 mm: 2 TR 22 x 1.5 mm: 3 TR 18 x 1.5 mm: 4 Bending Head Distance Range: 220-2000mm Possibility to operate 1 or 2 bending heads Power: 5.5 kW Connection voltage: 3 x 380 V, 50 Hz Bending unit drive: hydraulic Oil filling: 120 l Number of bending heads: 2 Hydraulic pressure for controlled deformation of bent material: yes, 2x Orientation bending radius: 3 x tube diameter Max. bending radius: 200 mm Min .. bending radius: 40 mm Max. bending angle: 100 ° Min. bend distance: 220 mm Max. bend distance: 2000 mm One cycle time (90 °, including backward movement): 5 sec. Machine dimensions: LxWxH: 2700 x 110 x 1400 mm Machine we ...

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

Tube bending machine, with base PAGUS ROKABI ( tube cold bender ) tube diameter: approx. 25 - 61 mm motor: VEM ZG1 KMR71 G 4 0,75 kW 63 rpm 220 / 380 V 3AC 50 Hz IP44 with accessories used, tested ! Dimensions: 1200 x 830 x 1000 mm

Inv. Num. : 5262 Type: XOTH 40 Producer: Unicorn Generated: Parameters: Maximum tube diameter: 40 mm Maximum pipe wall thickness: 2 mm Total power requirement: 4.6 kW Machine height: 1120 mm Machine length: 4450 mm Machine width: 800 mm Machine weight: 1100 kg

Inv. Num. : 5263 Type: DB 642 ST Producer: Transfluid Created: 1999 Parameters: Minimum tube diameter: 6 mm Maximum tube diameter: 42 mm Maximum bending angle: 190 h Machine height: 1150 mm Machine length: 4000 mm Machine width: 650 mm

Used automatic tubing machine for aluminum and plastic tubes. Producer Sigma. Model PK1. Technical parameters Efficiency: up to 1,700 pieces/hour depending on the dose capacity and product viscosity Power source: 3+PE+N, 380V/50Hz Input: 4kVA Working pressure: 6 atm Heated air: 2-4atm (required) Air consumption: 2001/min Max. current: 14A Fillable doses: up to 100 ml, (Filling pump 100m1) Tube type: Plastic, metal Recommended main voltage cables: CMSM 5Cx2.5 Recommended main voltage protection: 3-pos. protection 25A char. "B" Electrical coverage of the switchboard: IP 54 Control box coverage: IP 54 Control unit: Simatic S7-200 CPU 226

HYDROIL CHA 80 mandrel bender. This machine has been completely refurbished with change of all hydraulic pipes, pressure gauge, joints and screws + epoxy paint Description: - delivered with 15 complete sets of tools ranging from diameter 17.2mm to diameter 50mm, including certain diameters with 2 different radii (new market value of a single tool: €2,500) - hydraulic clamping vice - hydraulic tightening of the follower guide - hydraulic feedback from the mandrel at the end of bending to facilitate extraction of the tube - mandrel holder rod length 2 meters (so reduced bulk) - possibility of increasing the mast, therefore the working length - maximum capacity: diameter 50mm, thickness 2 mm in steel - maximum bending angle amplitude: 180° - rotation speed of the bending roller: 28°/sec. - torque available at maximum pressure: 654m daN - electric motor: 5.5HP, 1500 rpm - ...

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

It is an automatic hot air welding plastic pipe filling and sealing machine. (Metal tube option) The design principles, the materials used and the innovative concepts guarantee maximum productivity, ease of use and quality, making this machine the ideal solution for the pharmaceutical and cosmetics market. The group layout allows for easy adaptation to a wide variety of tube filling problems. Particular attention was paid to the quick changeover to different tube sizes and the consistency of the filling material. AREAS OF APPLICATION: Pharmaceuticals, chemicals, cosmetics, food, dietetics, medical devices, manufacturing. MAIN FEATURES: Easy-to-use tube filler with quick format changeover. Excellent access for cleaning and maintenance. Fast interchangeability of formats. . The machine is equipped with a pipe form with a diameter of 50 mm, other parts in tubular format are also ava ...

Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type: Robot Packer Hours 3630 Very good condition Instantaneous setting 100 tubes/min Documentation available

Automatic tube filling and sealing machine The equipment is a machine for filling and sealing aluminum tubes. This machine provides uniform and accurate filling of tubes with various materials, including pastes, ointments, viscous liquids, etc. The capacity of the machine provides processing of up to 1200 tubes/hour with filling volume error not more than 1%.

Stepped end tuber type 951, Gartemann + Hollmann, Year 1980, 4 plies, 2 colours, photo cell, Tube width 30-65 cm, Tube length 50-121 cm, Machine mechanically and electrically mounted, we also have a 4 colour tail end printer suitable for that machine

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Description: Machine number: 551 Power: 1000 W For pipes up to max. 35 mm diameter (Attention: see photographed technical plate as wall thickness plays a role) With accessories as shown in the pictures weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 700 x 600 x 400 mm

CNC fiber laser machine for cutting pipes and tubes of round, square and complex cross-sections and cutting holes in them of various shapes. ADRT 0262 is equipped with Raycus sources of the following capacities of 500 W; 750 W; 1000 W; 1500 W; 2000 W; 3000 W; 4000 W; 6000 W; 8000 W; 10000 W; 12000 W. • Processing length – 6200 mm • Laser source – Raycus • Type of cooling – S&A” chiller • Laser head – Raytools (Swiss) • Accuracy of repeated positioning - ≤ 0.05 mm • Supply voltage – 380 V • Servo motors, 750W • Gearbox type - Planetary • Square linear guides on all HIWIN axes • Feed mechanism - polished helical rack along the Y axis, along the Z and X axes - SHP • WEIHONG (Autonomous rack) • Automatic pipe support • Autofocusing of the laser head • Centralized system of automatic lubrication of moving m ...

Outside diameter maximum: 1 mm Inside diameter maximum: 1 mm Pipe length maximum: 1 mm Angle degrees maximum: 1 Wall Thickness: 1 mm Mandrel bending machineWORTELBOER HOLLAND - PBM 24 MACH-ID 8589 Make: WORTELBOER HOLLAND Type: PBM 24 Year: 2008 

Outside diameter maximum: 1 mm Inside diameter maximum: 1 mm Pipe length maximum: 1 mm Angle degrees maximum: 1 Wall Thickness: 1 mm Tube bending machineWORTELBOER HOLLAND - PBM-16 MACH-ID 8588 Make: WORTELBOER HOLLAND Type: PBM-16 Year: 2006

Outside diameter maximum: 250 mm Inside diameter maximum: 1 mm Pipe length maximum: 3000 mm Angle degrees maximum: 1 Wall Thickness: 6 mm CNC Brand: Siemens CNC Model: Siemens SIMATIC OP7 Tube bending machineTracto Technik - TUBOTRON TN90 MACH-ID 8556 Make: Tracto Technik Type: TUBOTRON TN90 Control: Siemens SIMATIC OP7 Year: 2005  3D Tube bender Bending axis hydraulic driven Tooling for 26, 33, 42, 48, 60 mm Max.Tube Ø:        88,9mm Min. Tube Ø:       8mm Max. Wall thickness:6,3mm Max. Bending radius:250mm Min. Bending radius:1mm Max. bending length:3000mm Power:             26kW Length:            5300mm Width:             1500mm Height:            1500mm Weight:      &n ...

Outside diameter maximum: 30 mm Inside diameter maximum: 1 mm Pipe length maximum: 3048 mm Angle degrees maximum: 180 Wall Thickness: 2 mm CNC Brand: _Unknown / Other CNC Model: Transfluid Tube bending machineTransfluid - DB 630 CNC MACH-ID 8531 Make: Transfluid Type: DB 630 CNC Control: Transfluid Year: 1997 Max.Tube Ø 30 mm Min. Tube Ø 4 mm Max. Wall thickness 2 mm Max. Bending radius 180 mm Min. Bending radius 10 mm Max. bending length 3048 mm 3e dimsion bending 360 mm/min. Power 22 kW

Shell-and-tube heat exchanger Manufacturer : Carl Capiter Technical data : Coat: Pressure 6 bar Operating temp. 140 °C Litre capacity 54 Pipe room: Pressure 6 bar Operating temp. 164 °C Litre capacity 32 Fabr. No. 502211 Total length 1.50 m, length to flange 1.25 m, diameter 0.43 m

Description: Operating voltage: 220 V Frequency: 50 Hz Rated current: 5 A Connection: 0.75 kW weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 920 x 720 x 1,170 mm

Description: For processing pipe ends Incl. manual operation from the manufacturer ELETTRONICA Type: VT 110 weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 900 x 1,700 mm

The Siemens 840D sl CNC manages the 15 axes that drive the machine with full electric technology, ensuring maximum precision during the bending phase. Equipped with latest generation absolute servomotors with integrated feedback and diagnostics, this impressive tube bender boasts a large vertical excursion (950 mm) which allows the accommodation of multiple levels of equipment. Rigidity and precision make it capable of bending very thick pipes (6/8 sch.80). Despite its imposing size, the 225HE has extremely low energy consumption, thanks to the Green Power philosophy and the Full Electric technology of its components. Its ergonomic configuration guarantees the operator maximum comfort in carrying out his tasks. The machine is equipped with three-dimensional graphics software on a 19 LCD Touch screen, through which the operator can program it intuitively. The UII User Iso Interface also ...

Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 50 kg

Description: TB 4/1250 Approx. Onsite Dimension. (l x w x h): 200 x 150 x 200 mm, weight approx.: 2 kg

Description: Tube Bender Serial number 196 Diameter capacity 55 x 2.5 mm thick Maximum radius 250 mm Minimum radius 28 mm Useful length: 2500 mm Power 5.5 HP Accessories for different diameters weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,100 x 900 x 1,700 mm

Description: on name MK5 diameter head 150 mm Approx. Onsite Dimension. (l x w x h): 320 x 230 x 230 mm, weight approx.: 9 kg

weight approx.: 1 kg, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm

Description:  , GENERAL MACHINE DESCRIPTION: A. Roller Conveyor for cell entry B. Machine for aluminium adhesive tape winding and cutting. C. Nr. 2 machines for butile adhesive tape application, tube and polietilene adhesive tape wrapping around and for aluminium tube end cutting. D. Machine for aluminum tube coining. E. Machine for internal tube diameter calibration on one or both ends. F. Pick-up for cell moving on single machines or from machines to roller conveyors. G. Conveyor for worked cells unloading.  , DIMENSIONS OF CELLS  , This sytem is projected to work cells type: COMBI BOTTOM and COMBI TOP.  , NOTE: Machine is not under power, already dismantled. Approx. Onsite Dimension. (l x w x h): 15,000 x 15,000 x 6,000 mm, weight approx.: 50,000 kg

FEEDSTOCK TUBE   external diameter min.: 20 mm   external diameter max.: 110 mm   length min.: 400 mm   lenght max.: 1700 mm PRESS FORCES   total force (nominal): 40 to System consists of: + WICK handling system, YoM 2012 + ABB IRB 6650S-90/3.9 handling robot, YoM 2012 + MAE M-AH 6 automatic pipe straightening machine, YoM 2012

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 221 mm   sheet width min.: 58 mm   sheet thickness max.: 8 mm   sheet thickness min.: 1 mm   exterior coil diameter max.: 2100 mm   exterior coil diameter min.: 1600 mm   internal coil diameter max.: 610 mm   internal coil diameter min.: 508 mm   coil weight max.: 6000 kg PRODUCT (PROFILE, TUBE)   external diameter min.: 22 mm   external diameter max.: 65 mm   length min.: 4500 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 100 m/min   feedstock transport direction: left to right Line consists of: - Band Preparation VAI-SEUTHE BV  ...

FEEDSTOCK TUBE   external diameter min.: 38 mm   external diameter max.: 130 mm   length min.: 3000 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   length min.: 4000 mm   lenght max.: 13500 mm CHARACTERISTICS DRAWING MACHINE   force: 550 kN   drawing length max.: 13500 mm   number of parallel trains / strands max.: 3   speed max.: 100 m/min   pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter:  22 mmmax. drawing rod / pointed end leng ...

FEEDSTOCK TUBE   external diameter min.: 60 mm   external diameter max.: 180 mm   length min.: 3000 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 50 mm   external diameter max.: 168 mm   length min.: 4000 mm   lenght max.: 12500 mm CHARACTERISTICS DRAWING MACHINE   force: 2000 kN   drawing length max.: 12500 mm   number of parallel trains / strands max.: 1   speed max.: 40 m/min   etching device: yes Function: Automatic (towing carriage moving forwards and backwards, front bench horizontal)Products: Round tubes, precision tubes, cardan shaftsmax. drawing rod / pointed end diameter: 120 mmmin. drawing rod / pointed end diameter:  33 mmmax. drawing rod / pointed end length: 240 mmmin. drawing rod / pointed end length: 20 ...

FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 90 mm Exclusions from supply (even when visible on photos): The equipment is supplied without test equipment and electronics, in particular without: - Ultrasonic system incl. digitization- test process Krautkrämer and measuring devices - Ultrasonic measuring device- Length differences >500 mm Sorting out Krautkrämer- Förster Defectomat continuous spool- Replacement mix-up test Krautkrämer

FEEDSTOCK TUBE   external diameter min.: 22 mm   external diameter max.: 140 mm   wall thickness min.: 1 mm   wall thickness max.: 14 mm   length min.: 4500 mm   lenght max.: 12500 mm Exclusions from supply (even when visible on photos): The equipment is supplied without test equipment and electronics, in particular without: - LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM - Replacement demagnetization Nukem- Replacement inspection electronics

FEEDSTOCK TUBE   external diameter min.: 25 mm   external diameter max.: 55 mm   length min.: 3500 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   length min.: 5000 mm   lenght max.: 13500 mm CHARACTERISTICS DRAWING MACHINE   force: 320 kN   drawing length max.: 13500 mm   number of parallel trains / strands max.: 3   speed max.: 100 m/min Function: Automatic (manual threading, pull chain runs forwards and backwards, front bench can be swiveled vertically) Products: Round tubes (mostly shock absorbers), semi-finished or finished products Modernized: 1999 new pulling belt and brake 2022 pulling chain partially renewed max. drawing rod / pointed end diameter: 40 mm min. drawing rod / pointed end diameter: 14 mm max. drawing rod / pointed end length: 170 mm min. drawing rod / pointed en ...

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 450 mm   sheet width min.: 90 mm   sheet thickness max.: 13 mm   sheet thickness min.: 2 mm   exterior coil diameter max.: 1900 mm   exterior coil diameter min.: 1100 mm   internal coil diameter max.: 760 mm   internal coil diameter min.: 610 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 30 mm   external diameter max.: 140 mm   wall thickness min.: 2 mm   wall thickness max.: 12 mm   length min.: 4000 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 65 m/min   feedstock transport direction: left to right Line consis ...

CONTROLS   PLC SIEMENS S5 115 U FEEDSTOCK TUBE   external diameter min.: 18 mm   external diameter max.: 127 mm   length min.: 3000 mm   lenght max.: 12000 mm Modernized:1996 pipe length increased from 8.5 to 12 meters2000 cross chain added on the rightmin. base length of hexagonal bundles: 150 mmmax. base length of hexagonal bundles: 350 mmmax. bundle weight: 4'000 kgmax. tube weight: 30 kg/m incl. scale BUSCH EMWincl. data recording station BUSCH 875

TECHNICAL SPECIFICATION   Max. diameter of tube: 65 mm   Max. wall thickness: 2 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5400 mm   space requirements -front/back-: 1550 mm   total height: 1500 mm   total weight approx.: 6500 kg + 8-axis CNC pipe and wire bender + CNC controlled feeder with pneumatic grippers + separate servo drives for   A-axis:  rotation unit 35 mm   B-axis:  bending heand   C-axis:  feeder   D-axis:  mandrel device   L-axis:  slide rail   P-axis:  chucking device   V-axis:  counter holder   Y-axis:  bending   Z-axis:  bend ...

CONTROLS   PLC SIEMENS S7-1500 FEEDSTOCK TUBE   external diameter min.: 27.5 mm   external diameter max.: 160 mm   wall thickness min.: 1 mm   wall thickness max.: 15 mm   length min.: 3500 mm   lenght max.: 13000 mm TUBE LEVELLING UNIT   number of leveller rolls: 6   number of intermediate rolls: 3   main drive power: 110 kW   feedstock transport direction: left to right System consisting of:+ various existing and supplemented pipe transport systems+ Tube Straightener Montbard DMS 168, YoM 1989+ Chipless Cutting System Bültmann STA 120 H, YoM 2005+ Saw Ohler KA-630-7877, YoM 1988+ Sample Saw Ohler K-400Modernized:2005 new Bültmann chipless cutting system2018 overhaul of complete electrical system2018 new safty protection systemInlet Feed Drive (top and bottom rolle ...

CONTROLS   PLC SIEMENS S7-400 FEEDSTOCK TUBE   external diameter min.: 22 mm   external diameter max.: 90 mm   length min.: 6000 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 17.5 mm   external diameter max.: 80 mm   length min.: 7000 mm   lenght max.: 13500 mm CHARACTERISTICS DRAWING MACHINE   force: 1000 kN   drawing length max.: 13500 mm   number of parallel trains / strands max.: 3   speed max.: 67.5 m/min   main drive power: 800 kW Modernized:2011 new drawbar mouth2019 new collar bearing, draw bench chain and gearbox2021 new front benchPulling capacity+ 1-fold: 500kN, no short-term overload+ 2-fold: 1000kN, no short-term overload+ 3-fold: 1000kN, short-term overload 1300kN + Rohrbremse Attachments: + tube brake m ...