lifting used for sale

Tank Car Lift Tipper Kemper Model: HK 150 Table tipper Mobile device with brake Connection 400V, 16A-CEE plug Machine More machines and equipment in stock!

Tank Car Lift Tipper Kemper Model: HK 150 Table tipper Mobile device with brake Connection 400V, 16A-CEE plug Machine More bakery machines in stock!

Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014

Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Praegeflaeche / Embossing surface 100mm x 133mm Einsatzhoehe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Praegetemperatur / Embossing temperature 50°C - 400°C Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Schwerlaststapler - Heavy duty forklift Svetruck 161238 Year 1995 - Serial-No. 5092172 Betriebsstunden 19.000Std. / Working hours 19.000h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

swivel electric, vacuum pump electric ---------- Technical data ---------- Load capacity horizontal / vetical: 500/250 kg, voltage: 400 volts, crossbeam: 1,500 x 750 mm, vacuum pump: 4.1 m³/h, vacuum: 850 mbar, weight: 125 kg Sold as is, without technical inspection

Bowl lift

It is a used, reconditioned Diosna mixer S 120 Plus (for max. 120kg dough / 75kg flour) for sale. The machine is in very good condition and fully functional. The mixer has a stainless steel bowl, a flour dust cover, two speeds and is mobile. Price on request.

Description: Carrying capacity: max. 1000 kg Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 640 mm, weight approx.: 1,500 kg

Description: Carrying capacity: max. 1000 kg Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 640 mm, weight approx.: 1,500 kg

Description: Carrying capacity: max. 1000 kg Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 640 mm, weight approx.: 1,500 kg

Description: Carrying capacity: max. 1000 kg Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 640 mm, weight approx.: 1,500 kg

Description: M8, M10, M12, M14, M18, M30, M36, M27, M24 weight approx.: 165 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm

Description: maximum load capacity 100 kg Approx. Onsite Dimension. (l x w x h): 200 x 140 x 80 mm, weight approx.: 3 kg

•Type: 4-point basket; •Capacity: 350 tons; •Internal serial number: B098; •CE certified; • last USL periodic inspection: 2023. Note: The sling bar is stored outdoors

Description: Carrying capacity 500 kg each Approx. Onsite Dimension. (l x w x h): 400 x 500 x 380 mm, weight approx.: 100 kg

Description: - Approx. Onsite Dimension. (l x w x h): 250 x 150 x 300 mm, weight approx.: 20 kg

Description: Load capacity 2000 kg including charger see pictures Approx. Onsite Dimension. (l x w x h): 400 x 280 x 450 mm, weight approx.: 700 kg

Description: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W, 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18- 20,M22,M24,M27- 30,M33,M36,M42,M48 The item that is deliver ...

Description: serial number: 0-240-05-1126 Technical details: total installed power: 24.50 kW cutting width: 4300 mm saw blade projection: 125 mm (with saw blade diameter 450mm) cutting height approx. 110 mm maximumum grippers opening: 130 mm main saw blade: max. diameter 450 mm and motor 13.5 kW scoring saw blade: motor 2.2 kW variable feed speed of the saw carriage: 5 - 100 m/min return speed of the saw carriage: 130 m/min maximumum pusher speed: 80 m/min front air tables: 4 pieces max. dimensions of the panels on the platform approx. 4300 x 2200 mm max. height of the panel stack on the platform approx. 680 mm max. load capacity of the lift table 7000 kg CADMATIC V3.0 control system CE marks main motor: 13.5 kW, serial number: 0-240-05-1126, cutting depth: 4,300 mm, cutting height: 110 mm, saw blade protection: 125 mm, main saw blade: 450 mm, control: CADMATIC V3.0,  ...

Description: Width 700 mm Length 2500 mm Max capacity 300 kg Pneumatic pressure 75 bar Approx. Onsite Dimension. (l x w x h): 2,500 x 900 x 1,000 mm, weight approx.: 300 kg

General SKU349U858 LocationBarneveld MakeServolift TypeHF 250 No.10815 Year of construction2003 Main Features MaterialStainless steel/Aluminium Motor1.5 KW Height2950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightmin. 400 mm: max. 2950 mm Tilting heightmax. 2950 mm Hydraulic drivecheck With hydraulic unitcheck (Merk: LOTZ, type: MC4-V1B-PM-MN-T07-F5) Motor1,5 kW, 400 volt, 1400 rpm Suitable for product sizesDia. 570mm Information With switchcheck Weight650 kg CEcheck Floorspace0,65x0,67 m Total height4 mMinerals & inorganicPlastic & rubberAPIPlastic & polymersBiopharmaceuticalDyes & pigmentsBeveragesAgrochemicalsSolid pharmaceuticsConfectioneryLifting/tilting machinesBiotechnologyOther feedRubberAnimal feedDairyLubricants & oleoOther chemi ...

Stock# U2333-10 Used stainless steel vertical lifting device for rising and tilting pans. Working height of rising up to 320 cm. Total height of the tower 396 cm. Machine is equipped with stainless steel cart for mounting pans with distance between holders 1115 mm. Pan is tilted manually through gearbox. Machine is equipped with electrically driven hoist with working capacity up to 500 kg. Together with machine are included two stainless steel pans: First with volume 350 l - made by Kates (PL). Tank has internal dimensions: diameter 770 mm x length of straight side of wall 760 mm. Flat bottom, no discharge outlet. Top open, with stainless steel cover mounted on eigth clamps. Tank has two side wall shafts/supports for tilt discharge. Pan is mounted on mobile stainless steel platform. Second with volume 250 l - made by Kates (PL). Tank has internal dimensions: diameter 630 mm x len ...

Lifting capacity: 9 ton

There are 4 Abus cranes available. 1.) ABUS VS 355 2.)ABUS VS 3.)ABUS VS 4.)ABUS VS. 1) ABUS VS 355 incl. dowel plate, year of manufacture: 1987, lifting capacity 750kg, lifting height 3000mm, construction height approx. 3800mm, reach 4000mm. 2.)ABUS VS, year of manufacture: 1986, lifting capacity 1t, lifting height 4700mm, reach 5000mm. 3.)ABUS VS, year of manufacture: 1986, lifting capacity 2t, lifting height 4820mm, reach 5000mm. 4.)ABUS VS, year of manufacture: 1986, lifting capacity 2t, lifting height 4820mm, reach 5000mm.

21-32-131 Electric - hydraulic U-lifting table NH HTF-U New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg. Price: 1860 EUR Buy three or more – PRICE: 1695 EUR (EXW Jonava, Lithuania) Dear Customers, We invite you to visit our store Jonava. Currently used to present the largest exhibition of woodworking tools in the Baltic countries - your store have more than 300 installations. Our team is always ready to help you find the right equipment. JSC Medienos ...

SERAPID 12 T die cart built in Germany is an innovative vehicle of stable design, able to maximise production processes through the precise, safe and efficient lifting of dies or tools. All of this is due to an extremely efficient electric drive, reliable cylinders and rigid chain technology, which is an environmentally friendly alternative to traditional hydraulic systems. The SERAPID 12 tonnes die change cart also guarantees increased reach at maximum working speed, thanks to the capacious Hawker Perfect Plus batteries. The net weight of the machine is 5200 kg. Technical specifications of the SERAPID 12 T die lifting cart - maximum load capacity: 12000 kg - maximum lifting height: 2000 mm - minimum lifting height: 740 mm - lifting speed: 0-57 mm/s - travel speed: 2.7 km/h - chain stroke: 2500 mm - batteries: Hawker Perfect Plus - battery capacity: 48 V – 330 Ah - chain ty ...

Stacker truck, walker, manual pedestrian stacker LOGITRANS type LF 1001 / 1600 Tool lifter series No: 051E04006100 Year of construction 2005 Load capacity: 1000 kg Lifting height: 1600 mm Fork length: 600 mm Platform size: 800 x 650 mm Total length: 1200 mm Total width: 800 mm Construction height: 1930 mm- Lifting by pumping movement with the traction dike- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height. - Driving by pushing hand fork stroke in single mast with free lift net weight 198 kg very good condition; used

General Electric chain Hoist Location Heerhugowaard Manufactured by Mennens Type Ak 620 DT 90 s4 No. 012007159.8.01.01003 Built in 1989 Key features Electric Big bag Bandtacle Motor EW Eurodrive Germany Specified properties Hoist. Material Lifting capacity WLL2000 kg Lifting speed 2 m/min Single lifting and driving speed Lifting height +/- 4 meters Total height row work and lifting block +/- 1 meter. Conductor rail control present length 4 meters. Inspection date 10-01-2010

Crane magnet, lifting magnet, load lifting magnet, load lifting magnet, round magnet, scrap lifting magnet, scrap magnet -Construction: electro magnet -max lifting capacity: 2200 kg -Dimensions: 250/340/H460 mm -Own weight: 1114 kg

Manual control stackers with electric – hydraulic gear. Lifting heights: 3000 mm. Acumulator: 12 V / 150 HP. With acumulator power indicator. Electric lifting gear motor: 1,8 kW. Lifting capacity: 1000 kg. Fork length: 1150 mm. Fork width: 550 mm. Standard free lifting course: 20 mm. Polyurethan wheels. Weigth: 466 kg.

1 Hubgeruest from the Still R70-45 forklift truck without free stroke Lifting capacity 4,500kg with side slider and fork tine adjustment incl. hydraulic slurs Building height 280cm, weight approx. 800kg Price 2,400.-EUR 2. Lifting truck from the Linde E15 forklift Lifting capacity 1500kg Building height approx. 220cm with side slider Price 450.-EUR 3. Duplexhugeruest Hyster XL4.00 without free stroke Lifting capacity 4000kg Building height approx. 400cm with fork-traeger Price 2,650.-EUR Forklift Hubger Mast Mast Forklift Truck Hyster Linde Kalmar Still H80D R60-45 R70-45 E15 E20 DCD90-6 DCD 100-6 DCD 120-6 Special price

16 to. Krankatze, Kone, CXT, (chassis, rope, hook) – used - : Price from location: 12.500.-€ (net), dismantled and loaded! Not part of the sale are: bridge, remote control, coil hooks. Manafacture: Kone Year of construction: 2019 Reference number of the 200967176/10 Order number 4501376439 Electric wire rope hoist Electric hoist type CXT60410160SA5JDD0S Factory number of the e-train 58704433 Load capacity 16,000 kg Lifting height 10.5 m Drum pulling force - Unwindable rope length – Classification M5 Current consumption 68.2 A Total power 36.3 kW Lifting motor Lifting motor type MF13XL200N260FA5132X-IP55 Factory number 58202098 Power (kW) 35 kW Gearbox Type GEN410NB000-D Lifting speed 11.20/0.22 m/min Factory number 58664786 Rope speed -/- Scrutinies Operating voltage 400 V Frequency 50 Hz Control voltage 48 V Factory Number - Type of c ...

Gema lifting device for holding 2 powder guns ( 3 also works ) Lifting height 2000 mm Total height with mobile motor and gearbox unit approx. 2500 mm Lifting device was maintained to the last by Gema Lifting device With motor, gear unit and rotary encoder org. Gema Connection via 16 pin HTS plug

Pallet stacker LIFT-S 1,2m 1500kg Only used for 2 months Pick up in 74722 Book now Specifications Dimensions: 1705 x 755 x 1720 mm Distance between forks 210 mm Drive manually Aisle width with Euro pallets 1945 mm Ground clearance 25 mm Ground clearance, up to fork top 90 mm Width 755 mm Chassis surface powder-coated Color: Blue Free lift function: Yes Fork width, outside 550 mm Fork width, single fork 170 mm Fork length 1150 mm Fork rollers Tandem rollers Warranty: 5 years basic warranty Total height, maximum 1720 mm total height, minimum 1720 mm Weight 220 kg Lifting type: Manual, hydraulic Lifting height 1200 mm Lifting height per pump stroke 15 mm Lifting height, effective 1115 mm Height 1720 mm Height of the drawbar 1200 mm Centre of gravity 600 mm Castors, width 70 mm Track rollers, diameter 80 mm Swivel castors, width 40 mm Swivel castors, d ...

Vehicle: • Make: Nissan – machine overhauled 2023 • UVV Audit 11-2023 • Type: EGH02 F30U • Drive type: Diesel • Engine: Nissan 4 cyl. • Transmission: Automatic • Load capacity: 3000 kg • Load center: 500 • Lifting height: 3300 mm • Hours: 6557 • Internal no.: 03122023 Mast data: • Mast: Duplex with free lift and side shift • Lifting height: 3300 mm • Fork carriage: 1200 mm • Fork length: 1200 mm • Fork width: 100 mm • Fork thickness: 50 mm Dimensions: • Length: 2530 mm • Width: 1120 mm • Overall height: 2050 mm • Weight: 4390 kg Battery: NEW Tyres: • Front tyres: solid rubber tyres • Rear tyres: pneumatic tyres Attachments & special equipment: - Longer forks are available at an additional cost - Operating instructions available Extras: Preparation for road approval Mirror 3 Auxiliary h ...

VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2

Hydraulic scissor lift table HYWEMA type SHT / IN Fabr. No. 52-22330 Year of construction 1996 / 2022 Technically overhauled in 2022 load capacity 4 ton. Platform size 2300 x 1200 mm Stroke max. 1420 mm Construction height - table bottom 400 mm Construction height - table top max. 1820 mm Table height with safety support 1565 mm Lifting speed 1420 mm in 30 sec. Lowering speed 1420 mm in 45 sec. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Hand switch for up and down on the cable - Circumferential safety edge for lowering shutdown - Hydraulics with tank mounted in the underframe- 1 piece lifting shears with two lifting cylinders - Steel plate mounted on the lifting frame 1200 x 1200 mm x thickness 20 mm Space requirement L x W x H 2300 x 1330 x 400 mm Net weight 1.4 ton. good condition; used

Chain hoist with electric chassis, trolley PFAFF SILBERBLAU Type PL10 2004B1 Capacity: 2000 kg Lifting height: 3,3,000 kgbr /br /lifting height: 3,000 kgbr /br /lifting height: 3,3,2004B1br /br / 0 m Lifting speed: 4 / 1 m/min Electric chassis type CHM20 Travel speed 20 m/min 1.75 / 0.45 kW voltage: 400 V 3AC, 50 Hz IP55 used, tested ! Dimensions ( without cable ): 650 x 450 x 730 mm

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 2x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Disperser with electronic speed variation diamac d 50 Disperser with electronic speed variation diamac d 50 Like new, never used, including auger for pouring powders and raw materials. The machine is sold including the auger (price agreements will be negotiated during the negotiation phase) CONSTRUCTION FEATURES Supporting metal structure Locking system adjustable bowl with tightening straps Dust and vapor tight cover, with dust loading hopper. Hydraulic lifting via control unit incorporated in the structure Lifting piston with non-return valves and flow regulator AISI 304-316 stainless steel mixing shaft V-belt and pulley transmission Impellers Cowless type in stainless steel. Aisi 304 stainless steel or chromed Main electrical panel with driving inverter including filter and anti-interference inductance Normal or ATEX type machine side control pulpit. Industrial or AT ...

Number of spindles: 4 St. Number of tools: 11 St. Spindle diameter: 50,40 mm Spindle length: 285,125 mm length: 4000 mm width: 2000 mm height: 2200 mm Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjusta ...

Iseki ZM 160 S, intermediate axle mower (belonging to carrier vehicle unknown), built in 2002, incl. accessories shown: discharge plate, lifting shears, lifting cylinder with lifting shaft and lifting arms. More mowers and grass pick-up technology available! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Lifting device standing, pneum. Fabr. Bittler T3 FT, 6 Bar, Y.O.M. 92 to 2002 Stroke 800 mm, lifting force 350 kg, adjustable forks 600 mm, safety shutdown when lowering for lifting trolleys when loading machines by hand, or when re-sorting

Lifting device standing, pneum. Fabr. Bittler T3 FT, 6 Bar, Y.O.M. 92 to 2002 Stroke 800 mm, lifting force 350 kg, adjustable forks 600 mm, safety shutdown when lowering for lifting trolleys or containers when loading machines by hand, or when re-sorting

From exposition Quick handling with with efficient electro - hydraulic pump. Places the load in the comfortable and ergonomically correct working position. Automatical activation of adjustable stabilizers when lifting higher more than 400 mm. Provided with bartery power level indicator. Polyurethane wheels. Supplied weith single piston rod. Can also be operated manually. Lifting speed with / without load: 19 /15 sec. Capacity: 1000 kg. Lifting height: 800 mm. Steering wheel diameter: 180 mm. Fork wheels diameter: 75 mm. Truck weight: 169 kg.

scissor lift table work table lifting platform lift table lifting platform Type: HD1000 Load capacity: 1000 kg Platform dimensions: 1.3 x 0.82 m Lifting height: 1.78 m Height retracted: 0,305 m Motor power 1.5 KW 400 V with remote control Other versions and optional extras available (see list) For other data, finishes, optional extras; Please inquire about delivery times and availability. Subject to prior sale, all information is subject to change. The machines can be picked up by the buyer or shipped by a forwarding agent at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option, they may vary, please inquire.

Still EXD SF 20 Pallet Stacker E-Ant + Charger + Driver's platform lateral support Fork length 120 cm YOC 2011 From the manufacturer the following information: The EXD-S is a heavy-duty double-deck stacker that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using double-deck loading and unloading. With the EXD-S, two pallets can be transported at the same time - This allows trucks to be loaded and unloaded in a time-saving and effective manner. Frame. - The shape of the frame has been specially developed for use in trucks and in confined spaces. In particular, the edge shapes support driving over ramps and entering trucks. - The tips and undersides are designed as sliding runners and prevent them from getting caught at transitions. The angled corners of the platform make it possible to drive backwards out of the truc ...

Lifting kneader Kemper F 125 A completely overhauled used Kemper lifting kneader with 2 stainless steel boilers each max. 200kg dough.The machine is completely overhauled and repainted, new electrics, new ball bearings, new gears.The machine can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. -with 2 speeds -with 2 automatic timers -with stainless steel lifting arm -per boiler max. 125kg flour or 200kg dough -with flour dust cover -Boiler with handle

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...