We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Type: VacuLift , Lifting capacity: 160 kg Traverse - dimensions: 6 x 13 meters Lifting height: 0 - 2,750 mm Vacuum lifter: Suction cups: 2 pieces approx. 200x300 mm + 4 pieces 50x100 mm Approx. Onsite Dimension. (l x w x h): 13,000 x 1,000 x 1,000 mm, weight approx.: 200 kg
used
Used lifting column unloader of the trays with a mechanical device used to unload the container process granules distributed on trays. The device is equipped with a shredder granules. The device has a complete DTR manufacturer. Specifications: max. capacity: 160 kg Tray size: 35x600x1000 mm max. number of trays: 8 max. process container height: 1300 mm prod.1997 year max. External dimensions: height. 3080 mm, width. 1550 mm, 1820 mm length Material: AISI 316 / AISI 304 implementation class: EEx e II T 3
used
Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.
used
VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)
used
Boiler lifting tipper Diosna Model: HK 115 For planetary boilers Stainless steel 2 tipping heights DGUV V3 tested Y.O.M. 2010 Device mobile with fixed device Connection 400V, 16A-CEE plug Used machine inawhichandy and tested with 6 months warranty
used
Kemper lifting tipper Type: HK 200L, HK 200R, HK 200LD 5 pcs Available
used
Stage bracket for Kemper HK 150 lift truck -for lifting and tilting Kemper boilers
used
Diosna lift tipper HK 240 for spiral and lifting kneaders from 1971
used
Lifting table,Hymo,hydraulic lift,table lift 830 mm.
used
Lifting table,Hymo,hydraulic lift,table lift 830 mm.
used
Lifting truck,stainless steel,TAWI model CR80,lift 1500 mm.
new
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Lifting capacity: 300 Kg Magnetic field: 228 x 122 mm weight: 0,016 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Lifting capacity: 1500 Kg Magnetic field: mm weight: 0,045 t dimensions: 0,44 x 0,22 x 0,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Lifting capacity: 1000 Kg Magnetic field: 258 x 176 mm weight: 0,031 t dimensions: 0,26 x 0,18 x 0,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Diosna D160 2G Lifting Kneading Machine used Boiler and kneading arm tinned Protective grille welded in one place two speeds Boiler was ground by the previous owner in some places does not affect the function, but should be mentioned Machine has been in stock at a dealer for a long time, is therefore dusty and dirty and should therefore be thoroughly cleaned before use Video about test run and other pictures available
used
Gebr. Lifting tipper Diosna HK 170, overhauled, suitable for models up to Diosna 240, load capacity 550 kg, machine no. 049-012, 1.5 kW, 400 V, 50 Hz, 3.7 A
used
Gebr. Lifting tipper Kemper HK 200 RD, overhauled, suitable for Kemper 150, machine no. KEM-0002983, 4 kW, 400 V, 50 Hz, 16 A
used
Used lifting kneader DIOSNA, Type: S 35 -In bakery condition- - for 35 kg of dough - New locking fixer - Machine runs smoothly - very nice condition - Weight approx. 250 kg Viewing and test run are of course possible by arrangement.
used
Kemper Hubkneter F125 ASL extendable with 2 stainless steel boilers 2 Speeds 2 timers Stainless steel lifting arm Year of construction 2001 Flour dust cover tested & cleaned
used
Diosna Lifting Tipper for Kemper SP 125 A Boiler Type: HK 224 Load capacity max. 600kg for SP 125 A spiral kneader boiler Can be driven on castors with locking device robust steel construction Overhauled at the end of 2010 Entry direction of the vats from the side Large tilt angle Tipping height of the boiler 210cm Tipping height: 210cm Height: 300cm
used
Lifting aid with vacuum head . Used to pack paper bags
used
Lifting tipper Kemper HK 150 -for boiler spiral kneader Kemper SP 150 A and AL -Load capacity 1000kg -Height 204 cm -Tipping height 190cm -can be driven on castors
used
Used lifting kneader KEMPER, Type: F 75 ASL -In bakery condition- - for 75 kg flour or 120 kg dough - incl. dust cover - Condition: technically good, ready for immediate use - including 2 tank cars - El. Connection: 400 V, 50 Hz, 3 Ph, 16 A Viewing and test run are possible by arrangement.
used
Used lifting kneader KEMPER, Type: F125 -In bakery condition- - for 200 kg dough / 125 kg flour - 2 speeds - Condition: technically very good, immediately ready for use The kneader is in a very good used condition and is immediately ready for use. Viewing and test run are possible by arrangement.
used
Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014
used
There are two identical lifting tables available, stroke: 1310mm, load: 7.5t, length: 3000mm, width: 2850mm, height: 430mm, weight: 2.9t.
used
There are 2 identical dalmec lifting aids available. Max. Load capacity: 140kg, operating pressure: 0.65Mpa.
used
Used lifting kneader DIOSNA, Type: D 200 / 2G -In bakery condition- - 2 speed levels - for 200kg dough or 125kg flour - Engine re-mounted - New V-belts - New timer - Stainless steel boiler - Plasticized kneading spiral nickel-plated and food-grade - Condition: Good, technically tested, cleaned, immediately ready for use Boiler volume: for 200 kg dough El. Connection: 380 V, 50 Hz, 7.1 A Inspection and test run are of course possible by arrangement.
used
Used lifting kneader DIOSNA, type: S 35 Plus -In bakery condition- - for 35 kg dough - Machine runs smoothly - technically tested and cleaned - very nice condition - Weight: approx. 250 kg Inspection and test run are of course possible by arrangement.
used
-Lifting tipper König -for König and Diosna Kessel -Weight 950 kg -Height: 235cm
used
Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland Type R96-20 Fabr. No. 9745 Year of construction 1999 Payload 2000 kg Centering mandrel 90 mm Suction surface Outer diameter 850 mm (plus seal)Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction surface 0.5 m2 Negative pressure min. -800 mbar Pumping speed approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 pieces Rietschle vacuum compressor, type VCE 100 Dimensions x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Net weight 2,5 ton.; used
used
Vacuum lifting device, vacuum lifter Custom-made as handling device for an industrial robot Year of construction 2008 Payload approx. 60 kg Suction foot spacing min. 120 x 150 mm Suction foot distance max. 700 x 600 mm- 4 pieces Suction feet 100 mm- 4 pieces Vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces Cross member, adjustable in width via servo drive from 150-600 mm- Suction foot distance adjustable via 2 servo drives from 120-700 mm - Suction cup adjustment via 3 servomotors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very complex and precise design with linear guides and trapetz threaded spindles- Flange plate for suspension or flanging on the robot Length: 105 cm, width: 66 cm, height: 54 cm Net weight approx. 120 kg good condition ; used
used
Hydr. Hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Masch. No. 115 106 1212 / 72783 Year of construction 1986 Saw area - round 250 mm Saw area - square 225 x 225 mm Saw area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole switchable Mains connection 380 Volt, 50 Hz - only for 90 cuts, no miter adjustment- Saw motor with 2 speeds and 3 V-belt steps - Hydraulic saw bracket feeding - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for saw bracket lower - manually via handwheel height-adjustable material support table with mm scale - manual material tension - Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1500 x 700 x 1550 mm Weight 590 kg very good condition; used
used
Foil lifting device, details see pictures, immediately available
used
Used lifting kneader DIOSNA, type: S 35 -In bakery condition- - for 35 kg dough - with timer -Dust cover - Machine runs smoothly - technically tested and cleaned - very nice condition Inspection and test run are of course possible by arrangement.
used
Used lifting kneader DIOSNA, type: S 20 3G -In bakery condition- - for 20 kg dough - 3 gears - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.
used
: Staplerhebebühne lifting capacity: 6600 kg weight of the machine ca.: 2,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
- Lifting kneader Diosna S 35 - with stainless steel boiler - for max. 35 kg dough - with 2 speeds - with foot switch - with flour dust cover - Boiler diameter inside: 52cm - Inside boiler height: 35cm
used
Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock
used
Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm
new
Lifting capacity: 100 Kg Magnetic field: 70 x 60 mm weight: 5 Kg dimensions: 100 x 120 x 120 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Lifting kneading machine Diosna Capacity: 120 kg dough With protective grille 2 speeds via foot pedal Condition: Repaired
used
Meyma Lift Tipper Type: HK 600 Specifications: for Diosna W 240 A spiral mixer boiler Dumping height: 170cm Load capacity: 600kg 400V 50Hz on castors Dimensions of lifting tipper: Height; 135cm Width: 130cm Depth: 190cm (with the safety bar)
used
hydraulic power pack / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Engine: 2,,2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 load capacity 1000 kp Pn 16 Mpa hub: 700 mm length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm
used
Lifting tower Lift MFI LAM a stroke: approx. 1900 mm used, tested ! Dimensions: 1700 x 1600 x 2800 mm
used
Lifting tower - Lift MFI LAM stroke: approx. 2300 mm used, tested ! Dimensions: 1700 x 1600 x 2800 mm
used
Lifting clamp, sheet metal clamp, sheet metal gripper TAKRAF KH 2 ( KH2 ) 2000 kg gripping range: 50 mm used,, tested ! Dimensions: 280 x 260 x 200 mm
used
Lifting clamp, sheet metal clamp, sheet metal gripper TAKRAF gripping range: 40 mm used, tested ! Dimensions: 240 x 210 x 170 mm Weight: 11 kg
used
Lifting strap, sling, loop tape DOLEZYCH WLL 10.0 t load capacity depending on application: max. 20,000 kg usable length: 3,000 mm width: 300 mm thickness: 10 mm loop width: 140 mm material: polyester. stitched in two layers Colour: Orange used, tested ! Dimensions ( packaging ): 500 x 300 x 180 mm