We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
129,000 used machines on RESALE, but how to find them? Machine Search
used
used
Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.
used
Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Load lifter: 4 pieces, holder Ø 80 mm -Shackle: M24 2 pieces per part -Price: complete -Dimensions: 250/155 / H250 mm -Weight: 36 kg / pc.
used
Diosna D160 2G Lifting Kneading Machine used Boiler and kneading arm tinned Protective grille welded in one place two speeds Boiler was ground by the previous owner in some places does not affect the function, but should be mentioned Machine has been in stock at a dealer for a long time, is therefore dusty and dirty and should therefore be thoroughly cleaned before use Video about test run and other pictures available
used
Lifting strap, lifting strap, crane strap, lifting sling, round sling, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 10,000 kg -Length: 17.3 m -Number: only one piece available -Weight: 72 kg
used
Lifting table, lifting platform, lifting platform, car lift -Manufacturer: Nussbaum -Load capacity: approx. 1000 kg -Foot dimensions: 740 x 420 mm -Max. stroke: approx. 1600 mm -with control -Dimensions: 3200/1930/H450 mm -Weight: 494 kg
used
Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg
used
Recording for lifting tippers for Diosna or Kemper lifting tipper models Dimensions: 120x110x125cm W/D/H
used
Diosna Dough Machine Model: Laboratory Kneader Stainless steel boiler and kneading arm for max. 6 kg dough Protective grille with protection circuit 2 gears Machine base mobile DGUV V3 tested E-system NEW Connection 400V, 3 Amp, 16A-CEE plug Used machine overhauled with 6 months warranty
used
-Boiler Hebekiper Diosna HKV 224 -with Boku stage -suitable for boilers with metal pipes on the sides -Tilt height approx. 120cm -Height 245cm -Footprint approx. 170x107cm -Year of construction 2015
used
used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW
new
For sale I offer a hydraulic spreader / lifting wedge from Holmatro with accessories. The hydraulic spreader is an unused Exhibit with slight traces of storage. Further condition please see the pictures. Details: Holmatro HVLV 16 S 2, wedge for vertical lifting Operating pressure: 720 bar Stroke: 20 mm Min. insertion opening: 9 mm 16 ton with spring retraction Shipping available for an extra charge. Hydraulic spreader is workshop tested and sold immediately ready for use with new UVV test and can be tested on site. Other accessories available on request. # Holmatro # Hydraulic spreader # Lifting wedge # Spreader
used
Diosna Lifting Tipper for Kemper SP 125 A Boiler Type: HK 224 Load capacity max. 600kg for SP 125 A spiral kneader boiler Can be driven on castors with locking device robust steel construction Overhauled at the end of 2010 Entry direction of the vats from the side Large tilt angle Tipping height of the boiler 210cm Tipping height: 210cm Height: 300cm
used
-Boiler lift tipper from Kemper model HK 150 -with stage for Kemper President Kessel -Height approx. 198cm -Tipping height approx. 195cm
used
KITTNER Lift-tilt device, type KHV-350/30L, for lifting and emptying 200 litre and 300 litre standard loading trolleys. Technical data: Tipping height: adjustable from 3,050 mm to 3,550 mm in 100 mm increments. Lifting weight: max. 300 kg Motor power : 0.75 KW Mains connection: 400V - 50 Hz Lifting principle: by means of roller chain Lifting speed: 5 m/min. Column height: 4,420 mm Total height: 4,480 mm, incl. 200 l trolley in tilted position! Degree of protection: IP 65 Execution: Lifting/tilting device in left-hand version, which means: The loading trolley is retracted into the lifting fork to the left of the mast at right angles to the slide axle! The mast, lifting fork and the fairing of the machine are completely made of stainless steel, material no. 1.4301, surfaces ground. The "slider" and the "slider axle" to accommodate the lifting fork are not made of stai ...
used
Lifting tipper Kemper HK 150 -for boiler spiral kneader Kemper SP 150 A and AL -Load capacity 1000kg -Height 204 cm -Tipping height 190cm -can be driven on castors
used
Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014
used
used
used
Used lifting kneader DIOSNA, Type: D 200 / 2G -In bakery condition- - 2 speed levels - for 200kg dough or 125kg flour - Engine re-mounted - New V-belts - New timer - Stainless steel boiler - Plasticized kneading spiral nickel-plated and food-grade - Condition: Good, technically tested, cleaned, immediately ready for use Boiler volume: for 200 kg dough El. Connection: 380 V, 50 Hz, 7.1 A Inspection and test run are of course possible by arrangement.
used
used
-Lifting tipper König -for König and Diosna Kessel -Weight 950 kg -Height: 235cm
used
Lifting kneader lifting kneading machine Kemper F30 SL -Manufacturer: Emil Kemper GmbH -Model: F 30 SL -with stainless steel boiler and lifting arm -with automatic timer -2 speeds -with flour dust cover -mobile on wheels -with new timer
used
used
Lift-tilt device, lifting tipper Make Itec, type 2700, year of construction 2017 for accommodating 200- and 300-litre standard loading trolleys lifting capacity: 350 kg Tipping height: 2.231mm incl. 1 standard loading trolley 3x460V 50 Hz 0,75 kW - very good condition, hardly used - was used to feed a piston filling machine - Documentation/operating instructions available Visit in Korntal-Münchingen possible
used
used
Used lifting kneader DIOSNA, type: S 20 3G -In bakery condition- - for 20 kg dough - 3 gears - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.
used
- Lifting kneader Diosna S 35 - with stainless steel boiler - for max. 35 kg dough - with 2 speeds - with foot switch - with flour dust cover - Boiler diameter inside: 52cm - Inside boiler height: 35cm
used
used
Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock
used
maximum number of results exceeded
please refine your search