lifting used for sale

The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.

-Massive construction, stainless steel beams and posts; -Dimensions: W=720 mm., L= 1250 mm., H= 1470 mm.; -Power: 4 kW, 400V, 50Hz; -Adjustable legs; -The machine is an analogue of the Magurit Fromat 042 guillotine; -Complete hydraulic system of the Hydac company. -Electrical part of Telemechanics; -Knives from Germany; -Reinforced design of the knives; The blades are as follows: two upper horizontal, one lower horizontal and three vertical. -Loading the blocks: the blocks of frozen meat are placed in a chute equipped with a pneumatic cylinder that lifts it for easier loading. -After cutting, the products are unloaded directly into 200 liter carts. -With a lifting device for the moulds -Complete with vertical dicing knives -Capacity: 2000 ÷ 2500 kg. / h. Loading the blocks:The blocks of frozen meat are placed in a chute equipped with a pneu ...

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

Electric chain hoist, chain hoist electric, with roller chassis used Manufacturer: LIFTKET Type: 071/53 Year of construction: 2008 Payload: 1000 kg two-strand lifting height approx. 5 m, single strand 10 m Lifting speed: 5.0 / 1.25 m/min with roller chassis Net weight approx. 60 kg Dimensions approx. 510 x 270 x 600 mm The chain hoist was only used for possible repairs in a mixing plant. So little has been used. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

It has a lifting and lateral moving function and four side clamping jaws, with a rotary table Manufacturer : AGROMAT Kft - Machine type: BEF-15 - Weight capacity: 1500 kg - Overall size: 4000 x 1800 x 3700 mm - accomadate sizes: 1200 x 800 x 700 mm - range of movement of clamping jaws: 150 mm - lifting height: 700 mm

Sweden made hydraulic scissors table. Manufacturer: Trans Lyft Type: TLH 1000 Year of construction: 1982 Weight Capacity: 1000 kg Overall Size while fully opened: 3400 x 620 x 1100 mm Overall Size while fully closed: 3400 x 620 x 255 mm Base size: 2600 x 600 mm Lifting surface: 3400 x 620 mm Max lifting height: 1000 mm

- Load capacity: 27 kg - Machine weight: 100 kg - Space requirement (W x D x H): 1.1 x 0.25 x 0.5 / 0.6 x 0.5 x 0.67 m - Condition: very good Details Gripper for tools or other parts. The part weight can be adjusted for lifting/lowering. Functions: Lifting/Lowering, Gripping, Swivelling Gripper holder 0.42 x 0.5 m Accessories no other accessories

Specifications Type: SDJ 1000/1600 Year of construction: 2014 Lifting capacity: 1000 kg lifting height: 1600 mm Mast height, lowered: 2080 mm Mast height, raised: 2080 mm Total weight: 214 kg Directly from the customer used from November from CH-Pratteln available.

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

TECHNICAL CHARACTERISTICS Supports: Folding supports Load capacity: 5,500 kg Load capacity at maximum lifting height: 2,000 kg Lifting height: 18.80 m Reach: 14.10 m Engine: Deutz TCD 3.6 L4 Stage V Rated power: 74.40 kW (101.20 hp) at 2,200 rpm Number of gears: 2/2 Hydraulics: 350 bar (load sensing) Length: 6.39 m Width: 2.53 m Ground clearance: 410 mm Empty weight: 14.100 kg Travel speed: 35 km/h Air conditioning as standard: Yes Automatic attachment detection: Yes Available from approx. February 2023

Kneader Kemper F125 SL Kneading Machine Menger -Lifting kneader with fixed boiler -for max. 200 kg dough or .max 125 kg flour -with 2 speeds -Stainless steel boiler and lifting arm -with flour dust cover -Boiler diameter inside 90cm -Boiler height inside approx. 50cm -can be used on wheels with 2 locks

E-chain hoist, electric hoist, crane STEEL type R 12 Fabr. No. 3437532 Year of construction 1979 Payload: 1250 kg Hook travel: 2.4 meters Lifting speed: 8 m/min. Fine lifting speed: 2 m/min. 2 load trains = 1250 kg Engine power: 1.25 / 0.25 kW mains connection 380 Volt, 50 Hz - chassis self-made - without chainbag good condition; used

Electric chain hoist, crane, hoist KONECRANES type XN 20 1608 B2 Fabr. Nr: 1016304318 Year of construction 2010 Load capacity 1600 kg Hook path 9 meters Main lifting speed approx. 8 m/min. Fine lifting speed approx. 2 m/min. Chain size 11,3 x 31 DAT Motor power main stroke 3,5 KW Motor power fine stroke 0,86 KW Mains connection 400 Volt, 50 Hz - 1 load line good condition; used

E-chain hoist, electric hoist, crane GIS/SWF type 150 / F Fabr. SKU: 15739 Year of construction 1970 Load capacity 1500 kg Hook travel 4.5 meters Main lifting speed 4 m/min. Fine lifting speed 1 m/min. - Electric carriage with one speed for double T-beams - 2 load trains good condition; used

E-chain hoist, electric hoist, crane GIS type EM 200 / F Year of construction approx. 1999 Load capacity 2000 kg Hook travel 3.9 meters Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Mains connection 400 Volt, 50 Hz - Electric carriage with 2 speeds for double-T-carrier - 2 load trains good condition; used

Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Stroke max. 515 mm Construction height Table bottom with rail castors 535 mm Height Table bottom without rail castors 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed Rail chassis approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual switch for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the underframe- Lifting shears with two lifting cylinders - The table was movable on rails, 4 rollers on the base, 200 mm - Drive of the rail rollers via SEW Gear motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm net weight approx. 1.3 ton. good condition; used

E-chain hoist, electric hoist, crane GIS type 150 / F Fabr. Product no.: 1502802 Year of construction 1981 Load capacity 1500 kg Hook travel 4 meters Main lifting speed 4 m/min. Fine lifting speed 1 m/min. - Electric carriage with one speed for double T-beams - 2 load trains good condition; used

E-chain hoist, electric hoist, crane YALE type 5-10/10-5 series. No. 8526 Year of construction 1979 Payload: 1000 kg Hook travel: 3 meters Lifting speed: 5 m/min. Fine lifting speed: 1.3 m/min. 2 load trains = 1000 kg mains connection: 380 volts, 50 Hz. - Suspension eyelet on the top of the crane good condition; used

Hydr. Scissor lift table WEIDMANN type E5/13-1 Fabr. No. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Stroke max. 1280 mm Construction height - table bottom 290 mm Construction height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch switch on the hydraulic unit for up and down - lowering speed infinitely adjustable via throttle valve- 1 lifting cylinder hydraulic unit year of construction 2007 with tank adjacent - safety protection frame with limit switches net weight 660 kg good condition; used

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS control via crane system control Fabr. No.61456646 Year of construction 2003 Payload: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm 1 load line = 200 kg - with control logic DKES2/5 500V - without crane operation - Dematik BUS control via crane system control - without roller chassis Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A good condition; used

E-chain hoist, electric hoist, crane GIS type EM 25 Fabr. SKU: 24468 Year of construction 1998 Payload: 250 kg Hook travel: 3.4 meters Main lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min. 1 load train = 250 kg cable length Control bottle: approx. 1.7 meters Mains connection: 400 volts, 50 Hz - Suspension eyelet on the top of the crane - without chassis Weight: 24 kg good condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4 Fabr. Ref.61801899 Year of construction 1997 Payload 100kg Hook travel 3 meters Main lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mm cable length control bottle approx. 1.7 meters Mains connection: 400 volts, 50 Hz 1 load line = 100 kg net weight 16.5 kg good condition; used

E-chain hoist crane DEMAG type PM 12LF Manulift Fabr. No. 5877813 Year of construction 1990 Payload 125 kg Hook travel 3.5 meters Lifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0,32 / 0,05 kW Mains connection 400 Volt, 50 Hz 1 load line = 125 kg Manulift hand control directly on the crane hook Good condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN5-500-K-V1F4 Fabr. SKU: 61077868 Year of construction: 1999 Payload 1000 kg Hook travel 6.5 meters Hood lifting speed 10 m/min. Fine lifting speed 1.6 m/min. 2 load trains = 1000 kg mains connection 400 volts, 50 Hz. - Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, carrier width 120 to 280 mm - 2 travel speeds 4.6 m/min and 14 m/min - Cable length of the operating bottle 4.5 meters Weight 130 kg good condition; used

E-chain hoist crane DEMAG type PK1N-F Fabr. No. 5533406 Year of construction 1983 Payload 125 kg Hook travel 3.8 meters Lifting speed 8 m/min. Fine lifting speed 2 m/min. Cable length control bottle approx. 1.2 meters 1 load line = 125 kg mains connection 380 Volt, 50 Hz Weight: 25 kg good condition; used

Spiral kneader Diosna WV 240 AF with lifting tipper HK 300 Diosna spiral kneader WV 240 AFT with 2 stainless steel boilers and lifting tipper -Spiral kneader system -Diosna Wendelkneter -with 2 stainless steel boilers -for max. 240 kg dough or for max. 150 kg flour -with Diosna tipper Model : HK 300 with clamp locking and boiler drive for boiler shearing

Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 5000kg/h. - Specification of the lifting crane: max. weight per bag: 1T | max. bulk bag size: L1200xW1200xH1700mm | machine dimensions without side crane: L1740xW1740xH5400mm | - Specification of the vacuum pump: Capacity: max. 5000kg/h | power: 380V, 5.5kW | hopper diameter: 650mm | discharge diameter: 420mm | height of vacuum pump: 1800mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possibl ...

Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 400kg/h. - Specification of the lifting crane: max. weight per bag: 1T | max. bulk bag size: L1200xW1200xH1700mm | machine dimensions without side crane: L1740xW1740xH5400mm | - Specification of the vacuum pump: Capacity: max. 400kg/h | power: 380V, 1.5kW | hopper diameter: 290mm | discharge diameter: 213mm | height of vacuum pump: 800mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible.  ...

Bulk Bag unloading system. INCLUDING lifting crane (HITACHI), stainless steel version and INCLUDING screw conveyor (capacity 8-10t/h) | max. bulk bag size: L1200xW1200xH1100mm | 380V, 2kW | electric chain block speed: 10.05m/min | lifting speed: 6.8m/min | Machine dimensions: L3200xW1700xH5000mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Fabr. Product code: 124984 Year of construction 2017 Load capacity 300 kg Platform size 1250 x 800 mm Useful stroke max. 785 mm Height - table bottom 345 mm Construction height - table top 1130 mm Motor power 0.8 kW Mains connection 400 volts, 50 Hz - Foot switch for up and down, with emergency stop and key switch for control Single scissors with a lifting cylinder - circumferential safety contact strip with limit switches under the upper ramen - adjustable limit switch for the upper lifting restriction - table surface with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic unit with tank mounted under the table- feet under the table corners, mobile with pallet truck own weight 430 kg very good condition, almost as new; used

Lifting capacity: 3200 kg Hoist height: 4000 mm Span length: 6000 mm Type: VS   Span:        6000mm Lift height: 4000mm Capacity Kg: 3200 Lifting speed:5/20 Length:      8000mm Width:       1200mm Height:      5500mm Weight:      3000kg

working length: 2451 mm Working width: 2170 mm Working height: 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW  ...

E-chain hoist, electric hoist, crane STEEL type T510-8 / 2.0 2/1 Fab. No. 1524132 Year of construction 1997 Load capacity 2000 kg Hook travel 4 meters Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Load trains 2 Cable length Control bottle approx. 0.9 meters Nominal power 1.6 kW / 0.36 kW Rated current 4.3 A / 2.5 A Mains connection 400 Volt, 50 Hz - Suspension eyelet on the top of the crane- Emergency stop weight 75 kg good condition; used

Span 177 Meter ; Lifting Height 74 +12 Meter; 2 x 300 Ton Hoists; Main Hoist 350 ton, Auxiliary. Hoist 350 Ton ; Service Crane 6,3 Ton (2008) Capacity: Span 177 Meter ; Lifting Height 74 +12 Meter Make KONE-WIA Year 2008

Electric chain hoist, electric hoist, crane DEMAG type DKUN 2-250 K V1 F4 Factory No. 61113041 Year of construction 2000 Load capacity 250 kg Hook travel 3.3 meters Main lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 4.2 x 12.2 mm Cable length Control bottle approx. 1.7 meters Mains connection 400 volts, 50 Hz 1 load string = 250 kg - emergency stop Weight 31 kg good condition; used

: gebraucht : 1999 : 8293 : prompt, Zwischenverkauf v : 27800 € : 1 : 2520 mm : 5 mm : 155 ° : 4+1,5 kW : 3950 mm : 830 mm : 1520 mm : 4975 kg min. Clamping width between upper and lower beam 60 mm Lifting height of upper beam 200 mm Height adjustment/transmitting of the lower beam 60 mm Height adjustment/transmitting of thebending beam 60 mm Bending angle / stepless 0-135° Extended bending angle 0-155° Bending speed 4,77 U/min Lifting and lowering speed of the upper beam 4,5 mm/s Working cycle 90° bending 10 s Motor upper beam 2,2 kW Motor bending beam 5,5 kW Foot pedal Flat rail 45°, Split goat foot rail Height 100 mm Length 2105 mm, Radius rail R 33 mm, Bending beam rail 20 mm, Attachment rail 15 mm, Attachment rail 35 mm, 20 Stk. Replacement break plates User manual in german with Declaration of conformity The data for this ad was created with ModulMWS - the software solution ...

Load capacity 2000 kg Hours ~300 Lifting mast telescopic mast Construction height 2365 mm Free lift 150 mm Lifting height 3584 mm Fork length 1150 mm Tyres POLYURETHANE Battery 24V 375Ah Battery year 2022 (was replaced at our request) Charger 230V Polyurethane drive wheel as well as track rollers -tandem-, 1 spare drive wheel OptiSpeed -electric- drawbar steering, Drawbar switch for driving with vertical drawbar, Fork -lattice box version 61mm thick-

High-rack stacker with 1.2 m lateral insertion path Lifting capacity 1 t Lifting height 10 m Battery still very good Forklift is still in very good condition, has been serviced regularly.

Storage stacker with lateral 1.2 m thrust Lifting capacity 1 ton Lifting height 3 m Driver's cab also goes up without battery

Heavy-duty forklift 20 tonnes (gas) for sale in good condition, engine and forks new. To be given away inexpensively due to the purchase of a crane. Lifting weight: 20,000 kg Lifting height: 2.83 m (D) Rated Power: 110 KW Serial Number: 28230 Weight: 24.2 tons Extras: FF. SS. FORK POS. TAXI. FORKS 1520MM

Self-loading truck-mounted forklift CDD05 - Electric for 500kg This self-loading electric truck-mounted forklift is suitable as a truck-mounted forklift for delivery vehicles or for trucks without a loading ramp. It automatically loads itself to the next higher level. Thanks to this special pallet truck, power and nerves can be spared during loading and unloading - especially if there is no lifting platform. This model can also be used for pure transport work up to 500 kg. It is used in logistics, goods handling and is also designed for tough everyday industrial use. Special pallet trucks for everyday industrial work Self-loading and electric Load capacity of 500 kg with a fork length of 1050mm Maximum lifting height of 1300 mm NEW - Pick-up in 74722 Book

Kemper lifting mixer extendable Type: F 200 ASL 2 speeds 3 stainless steel boilers Stainless steel lifting arm with flour dust cover 2x timers 2x speeds for max. 320kg dough overhauled and repainted

Kemper Lifting Kneader F125 ASL extendable with 2 stainless steel shells 2 speeds 2 timers Stainless steel lifting arm Year of construction: 2001 Flour dust cover overhauled and repainted

Material store, drying store -Electric driven with lifting unit -Max. Stroke: approx. 1500 mm -stable execution -Number: 3 x approx. 14 places -max load per lifting unit: 550 kg -with frequency converter in the gear motor -Drive: 0.075-0.37 kW -Speed: 12-61 rpm -Dimensions: 1800/1010/H3200 mm -Weight: approx. 2000 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 750 kg -Lifting speed: 9.5 m/min -Lifting height: 9.5 m -without service -Dimensions: 730/420/H340 mm -Weight: 160 kg

2500 kg lifting capacity, 12,5 cm lifting height, 240 cm fork length, multifunction steering wheel, very good working condition Equipment Cabin Drive type: Electric drive, Hp / kw: 1 hp / 1 kW, Year of construction: 2011

Hydraulic jack MADIX DRESDEN SK 25 / 175 ( SK25/175 ) lifting capacity: 25 Mp lifting height: 175 mm used, tested ! Dimensions: 300 x 130 x 200 mm

Chain hoist with electric chassis, trolley HADEF TYPE 30 / 85 ( 30/85 ) Payload: 1000 kg chain length: approx. 5 m lifting speed: 1,1,5 / 6 m/min Travel speed: 4 / 16 m/min Beam width: approx. 100 - 180 mm Lifting motor: 0.37 / 1.5 kW traction motor: 0.06 / 0.25 kW voltage 380 V 3AC 50 Hz cable length control bottle: approx. 3.0 m cable length power cable: approx. 20.0 m used, tested ! Dimensions: 600 x 600 x 450 mm

Lightweight crane Pagus hydraulic Lifting capacity: 500 kg lifting height: max 2100 mm used, tested ! Dimensions: 1600 x 950 x 1670 mm Weight: 50 kg