136,826 used machines on RESALE, but how to find them? Machine Search
It is a used, reconditioned Diosna mixer S 120 Plus (for max. 120kg dough / 75kg flour) for sale. The machine is in very good condition and fully functional. The mixer has a stainless steel bowl, stainless steel kneading arm, a flour dust cover, two speeds and is mobile. The machine has a new control system with two timers. A video can be sent on request. Price on request.
- old German quality, virtually indestructible. - Aluminum boiler - With steel lifting arm - without lid / protective grille - with age-related signs of wear and tear and Wear and tear see photos - Shell diameter 76 cm (inside) - Shell height: 44cm (inside) - Height: 114 cm (lowest position) - Width / Length: 99cm x 83cm - 380 volts
capacity 40 tons; approx. 90 mm; without pallet; Auction-ID: A1-50476-20
Used Lifting Kneader KEMPER, Type: F 75 -Refurbished- - for 75 kg flour or 120kg dough - Incl. dust cover - Condition: Very good, ready to use - 6 months warranty Visits and test runs are possible by arrangement.
Lifting mixer Diosna D200A extendable + 3 boilers - Extendable Diosna lifting kneader - With 3 stainless steel kettles - per kettle for max. 200kg dough or for amx. 125 kg flour - 2 speeds slow and fast - Machine completely repainted
Lifting magnet, solenoid VEM LB 3 x 8 ( LB3x8 ) TGL 10273 Load capacity: 3000 kg Protective resistance: 280 Ohm 220 V DC voltage used, tested ! Dimensions: 800 x 320 x 430 mm
Body lifting and alignment device Strap belt table with lifting and alignment device Fezer Vacuum Lifter Control: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm More items - new and used - can be found in our shop! International shipping costs on request!
Lifting clamp, sheet metal clamp, sheet metal gripper TAKRAF KH 2 ( KH2 ) 2000 kg gripping range: 50 mm used,, tested ! Dimensions: 280 x 260 x 200 mm
Boiler lifting tipper Diosna HK 170 Bj: 2010 in used lifting tipper Diosna HK 170 is currently for sale. This machine is immediately available in our warehouse in Bielefeld. -Mobile on castors -380 volt plug -Tipping height approx. 120cm -Total height approx.: 155cm -External dimensions approx: 162cm deep and 120cm wide
Lifting clamp, sheet metal clamp, sheet metal gripper TAKRAF Gripping range: 40 mm used, tested ! Dimensions: 240 x 210 x 170 mm Weight: 11 kg
A used Kessel lifting tipper Diosna HK 224 is currently for sale. This lifting tipper is immediately available in our warehouse in Bielefeld. Boiler lifting tipper Diosna HK 224 - Boiler lifting tipper for Diosna spiral mixer SP 120 and SP 160 boiler - Dumping height approx. 200cm - Total height height approx. 295cm - Lifting tipper is mobile on castors - 380 Volt 50Hz
new jib of 3 tonnes, can extend to 2.51m Auction-ID: A3-46142-6413
Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm
new jib of 3 tonnes, can extend to 2.51m Auction-ID: A3-46142-6414
Lifting clamp, sheet metal clamp, sheet metal gripper TAKRAF 3200 kg Gripping range: 70 mm used, tested ! Dimensions: 300 x 230 x 190 mm Weight: 19 kg
Lifting clamp, sheet metal clamp, sheet metal gripper TAKRAF SK-V 2392 450 kg gripping range: 4 - 6 mm eyelet Ø 20 mm used, tested ! Dimensions: 200 x 170 x 55 mm weight: 6 kg
Lifting Spindle Drive, Electric Cylinder FRAMO Type Mini 2 (8-2020-00.00. 00) D/A stroke: 160 mm lifting capacity: 5300 N rod diameter: Ø 28 mm motor: 0.5 kW 1360 rpm 400 V 3AC IP54 2x approx. 1.0 m connection cable New ! Dimensions: 430 x 115 x 160 mm
Lifting tipper Kemper HK150 - Boiler lifting tipper Kemper - Type: HK150 - 400 volts
A retractable Diosna D240A lifting kneader repainted with 2 stainless steel boilers is for sale and immediately available in stock. Lifting kneader Diosna D240A - With 2 stainless steel kettles, optionally more - per kettle for max. 240Kg of dough or for max. 150Kg of flour - 2 speeds, slow and fast - With flour dust cover - Machine completely repainted
used lifting tipper HK 600 (table / tabletop device), suitable for Diosna 160 and 200 kneading machines, height 140 cm
Lifting spindle drive Framo - Drive technology 3 units in stock Stroke 1,500 mm Adjustment force 4,000 N Lifting speed 5 mm/s -New- -Unit price- Original price today approx. € 6.300,00 net per piece
Rühle double jacketed vacuum tumbler with lifting arm for 200 liter meat bins, Busch vacuum pump, type: KC 0016 E, serial number: CZM120480309, 19 m³ per hour, inside dimensions: Ø 800 mm x 650 mm, total dimensions: 1950 mm x 1600 mm x 2500 mm.
WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM S. No.: 5950798 Equipment / Additional information: With heating Also very interesting for the textile industry
Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run
Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995
Diosna HK224 Lifting tipper for Diosna SP240AD / SPV240AD boiler - Manufacturer: Diosna - Type: HK224 - for Diosna SP240AD and SPV240AD boiler - Load capacity 600Kg - Year of construction 2009 - With boiler scraper - with boiler drive - 400V / 50Hz - 1.7 kW Metrics: Height approx. 405cm Dumping height approx.: 220cm
Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995
Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990
Manufacturer: Rapid, Type: Kettenstemmer, Year: ca.1980, Min.-max. workpiece height in mm: 200-1200, Vertikal moulding unit: 1, Motor kW: ca.1,0, Travel top to down mm: 150, Travel longitudinal mm: ca.300, Max door width mm: 1200, Max. mortise hole dimensions L X W X D mm: 150 X ca.300, Drill spindles: 1, Face plate aggregate: no, Key hole boring aggregate: no, Year :ca.1980
Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999
Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002
Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,
Manufacturer: Framar, Bauyeshr : 1992, Control: hand, Work stations: 1, Vertikal moulding unit: yes, Motor Kw: 3, Travel top to down mm: 120, Travel longitudinal mm: 275, Max door width mm: 1000, Max. mortise hole dimensions L X W X D mm: 20 X 75 X 110, Min. mortise hole dimensions L X W X D mm: 2 X 20 X 35, Automatic clamping system: yes, Incl. stopper system: yes, Trench deepth max mm: 110, Lifting device: yes, Wight approx. kg: 900, Year :1992
18011101 Drive: Gasoline engine Auction-ID: A7-51315-20
Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.
maximum number of results exceeded
please refine your search
50 € 
