136,830 used machines on RESALE, but how to find them? Machine Search
Lifting device for 200-litre containers Manufacturer: Carnitech Type L 125 Dimensions 1300 x 1500 x 4050 mm Power 3 x 400 V, 50 Hz, 0.75 kW With slide for liquid products
Lifting kneader DIOSNA, type: S 120 -In very good condition- - for 120 kg rye dough and 90 kg wheat dough or 75 kg rye flour and 58 kg wheat flour - 2 courses - Timer switch - Condition: technically very good, everything checked - The machine runs very smoothly - We are happy to send a video - Ready for immediate use Visits and test runs are possible.
NAGEL Horizontal honing machine with automatic lifting HHM 90A - Honing range: 1.9-100 mm diameter - Spindle motor: 0.55 kW - Spindle speed: 95-2300 rpm - Stroke length: 0-150 mm (infinitely variable) - Stroke frequency: 80-400 strokes/min (infinitely variable) - Lifting position: 250 mm (adjustment range) - Extension stroke for workpiece change: 100 mm - Weight: 420 kg net Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prio ...
Lifting kneader in stainless steel version DIOSNA, type: S 35 Plus -Refurbished- - for 35 kg dough - Overhaul by DIOSNA (control, timer, emergency stop at the top) - Separate control system above the machine - 2 courses - Time clock - With plastic hood - Weight: approx. 250 kg - El. Connection: 380 V, 50 Hz, 3.9 A - Very good condition - a video can be sent Inspection and test run are of course possible by arrangement.
table length: 1300 mm table width: 800 mm stroke height: 1020 mm weight max. in kg: 2000 kg : mm connected load frequency: 400 V total power requirement: 0,75 kW stroke speed - idle stroke upwards: sek. stroke speed - idle stroke downwards: sek. weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,3 x 0,8 x 0,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The lifting tilting device includes the substructure of the traversing trolley, the control cabinet, the vibrator and the lifting tilting device. The centrifuge is not included. Performance specifications including the centrifuge: Electricity 59 A, power 28 kW, 50 Hz.
Lift-tilt device, lifting tipper Make Itec, type 2700, built in 2017 for 200 and 300 litre standard loading trolleys Max. lifting capacity: 350 kg Dumping height: 2,231mm incl. 1 standard loading trolley 3x460V 50 Hz 0.75 kW - very good condition, hardly used - Was used to feed a piston filling machine - Documentation/operating instructions available Viewing possible in Korntal-Münchingen
Pieterman Glastechniek Vacuum lifting system Manufacturer: Pieterman Type: 22002220 M-Nr.: 3704 Year: 2006 Scope of supply: Vacuum lifting device (optional we can supply 220V power supply cable) Lifting capacity: 500 KG horizontal and vertical lift Stand: NN – under crane mounted Control: Elektric Vacuum Lifting: Cups: 1 oval shaped cups, width with tilting form horizontal to vertical and turning of the cup Tilting: Turning: Condition: Complete and fully functional
Schmalz Vacumaster tilting-hall crane mounting Manufacturer: Schmalz Type: Vacumaster Year: 2008 Lifting capacity: 250 KG horizontal lift 200 KG vertical lifting Control: Electro-pneumatic lifting Tilting: pneumatic Cups: 63 cm
Erkom Ergo vacuumlifter Manufacturer: Erkom Type: Ergo 75 KG, 3.000 mm 5.000 270° Workfield: 5.000 mm 3.000 270° Lifting capacity: 75 KG horizontal- or vertical lifting Lifting height: 0 – 2.750 mm Vavcuum pump: Siemens-Elso Pump capacity: 3.0 kW / 2 Bar Abs. en 250m3/huur. Control: Vacuum controlled lifting and clamping Pneumatic tilting Suction feet: 4 pcs. X-Y positioning Stroke: 5.000 mm Swing angle: 270°
Equipped for boiler DIOSNA PSPV 160 Overall height Load capacity up to 600kg with pliers lock Tilt direction left with peeling with dough slide shield lower edge ______ with boiler proximity sensor
Model No.: 143783 Maximum load: 300 kg Equipment / Additional information: Loading direction: left
used
Vakuu lifting device for attachment to an overhead crane = - Manufacturer: Aerolift - For lifting and turning up to 90 degrees - Max. load capacity: 16 t - Equipped with 8 suction plates, each approx. 60 x 120 cm in size - With 3 vacuum pumps
Model No.: 143784 // S. No.: H - 6026 Maximum load: 300 kg Equipment / Additional information: Loading direction: right
2 pieces dough divider RHEON, type: Twin DIvider 400 VX 202 incl. lifting tipper BMTEC Dough-friendly division from rye dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - 2 pieces of machines + lifting device from BMTEC - Condition: Good, ready to use Visits and test runs are possible by arrangement.
Model No.: 143784 // S. No.: H - 6025 Maximum load: 300 kg Equipment / Additional information: Loading direction: right
Model No.: 143784 // S. No.: H - 6024 Maximum load: 300 kg Equipment / Additional information: Loading direction: right
Model No.: 144148 // S. No.: H - 6042 Maximum load: 300 kg Equipment / Additional information: Loading direction: front
Model No.: 144148 // S. No.: H - 6043 Maximum load: 300 kg Equipment / Additional information: Loading direction: front
Model No.: 144148 // S. No.: H - 6041 Maximum load: 300 kg Equipment / Additional information: Loading direction: front
Model No.: 144148 // S. No.: H - 6040 Maximum load: 300 kg Equipment / Additional information: Loading direction: front
Execution: stainless steel, - Overall height: approx. 3.180 mm, - Overhang height: approx. 2.200 mm, - Base/plate for mounting: approx. 440 × 330 mm, - Electrical drive with geared motor, - Vertical guide with tipping mechanism, - Tray/slot for containers/crates, - Robuste Edelstahlausführung für den Einsatz in der Lebensmittelindustrie, - Electrical end position/position check, execution: stainless steel, Total height: approx. 3,180 mm, Dumping height: about 2,200 mm
Lowest position 380mm, mobile, foot pump for lifting Auction-ID: A1-50476-105
Load capacity 600 kg, basic size 215 x 120 mm, never used Overall dimensions: 300 x 300 x 130 mm Weight: 20 kg Auction-ID: A7-50796-225
ŁUCZKO Trawersa TS-10 Lifting Beam Manufacturer: Przedsiębiorstwo Produkcyjno-Usługowe ŁUCZKO Model/Type: TS-10 Equipment type: Lifting Beam / Spreader Beam (Trawersa) Year: 2023 Serial number: 25 OR5 27 Location: 91701 Trnava Industrial lifting/spreader beam designed for handling and lifting heavy loads. Heavy-duty steel construction with CE marking. Technical specifications: Lifting capacity (WLL): 1.0 t Own weight: 75 kg Year of manufacture: 2023 CE marked Condition: Used only a few times. Auction-ID: A1-50694-102
358, 350, 250, 5035, KL12.5, KL10.5, 5025, KL12, KL10, Used Auction-ID: A1-50849-649
ŁUCZKO Trawersa TSW-3 Lifting Beam Manufacturer: Przedsiębiorstwo Produkcyjno-Usługowe ŁUCZKO Model/Type: TSW-3 Equipment type: Lifting Beam / Spreader Beam (Trawersa) Year: 2022 Serial number: 331 OR5 345 Location: 91701 Trnava Industrial lifting/spreader beam designed for handling and lifting heavy loads. Heavy-duty steel construction with CE marking. Technical specifications: Lifting capacity (WLL): 3.0 t Own weight: 200 kg Year of manufacture: 2022 CE marked Condition: Used only a few times. Auction-ID: A1-50694-98
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx. ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx. ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx. ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchecke ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx. ...
Used hydraulic scissor lifting platform EYHER 2-7.5-1, 2000 kg capacity, 1240 mm. The machine has been inspected by our specialised technical department, meets all safety requirements and is offered with a 1-year warranty. EYHER S.L. is a Spanish manufacturer of hydraulic scissor-type lifting platforms (single, double or triple scissor). Safety features include a lowering lock system in case of hose rupture, a safety frame, chrome-plated piston rods and self-lubricating bearings with upper/lower limit switches. External dimensions: length 200 cm, width 70 cm, height 49 cm closed - 120 cm raised. The work table is 5 mm sheet steel. Lifting capacity 2000 kg up to a height of 120 cm. Hydraulic lifting system driven by a 380 V electric motor. Extra removable steel plate with sliding rollers: thickness 2 cm, length 190 cm, width 70 cm. Auction-ID: A7-50988-120
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx. ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchecke ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx. ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchecke ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchecke ...
Various chain hoists including lifting eyes and suspension brackets, capacity including 1.6t, 0.5t, Auction-ID: A1-50656-195
equipped with 3 point lifting chain, 6.8 kW, 220V, 2017-9 Auction-ID: A1-50656-100
Equipped with 3-point lifting chain Auction-ID: A1-50656-101
Load capacity 600 kg, basic size 215 x 120 mm, never used Overall dimensions: 300 x 300 x 130 mm Weight: 20 kg Auction-ID: A7-50799-225
Load capacity 600 kg, basic size 215 x 120 mm, never used Overall dimensions: 300 x 300 x 130 mm Weight: 20 kg Auction-ID: A7-50798-209
Extra options: All-round LED lighting, daytime running lights, joystick control, blue spot, beacon, Red hazard lighting Auction-ID: A1-51065-28
Compact and manoeuvrable VMAX E10N electric forklift truck with a nominal lifting capacity of 1,000 kg and a maximum lifting height of approximately 3 metres. Thanks to its compact dimensions and electric drive, this truck is particularly suitable for warehouses, workshops, production areas and logistics applications where manoeuvrability is essential. The machine is equipped with a duplex mast, solid tires, safety roof and a 24V traction battery. The mast, chains and guides are in good condition. The truck has a robust counterweight and offers stable and safe operation in daily internal transport tasks. The machine has approximately 11,953 operating hours. The forklift presents itself visually well-groomed with normal signs of wear according to age and professional use. Starts, drives, steers, lifts and lowers properly during test run. The charger is included. If necessary, it can be lo ...
YPE: Industrial transport rollers / machine movers Brand: unknown Model: SK18ZP (according to rating plate, subject to change) Load capacity: 18 tons (according to type plate) 1 blue transport roller with turntable 2 yellow transport rollers with 9 track rollers each 1 hydraulic machine jack Including draw/steering rod Suitable for moving heavy machinery and industrial installations Used condition, Auction-ID: A3-46142-11319
Load capacity 600 kg, basic size 215 x 120 mm, never used Overall dimensions: 300 x 300 x 130 mm Weight: 20 kg Auction-ID: A7-50798-112
20 Ton Hydraulic Rolling Jack – Model 517 Italian brand professional rolling hydraulic jack, model 517, for lifting heavy trucks, buses, trailers, machinery and other heavy vehicles. The nameplate indicates a lifting capacity of 20 tons, a year of construction 1974 and the serial number 81388. The jack is equipped with a heavy metal frame, travel wheels, a lifting saddle and a long control handle for positioning and use. The hydraulic system works properly: the jack rises and falls normally and holds the load. The operation was checked at the time the photos were taken. The whole is in an old and used condition, with peeling paint, traces of rubbing, visible oxidation on some metal parts and general wear corresponding to its age and professional use. The wheels and some mechanical elements also show traces of corrosion. These defects are visible in the photographs and do not preven ...
Viewing by appointment Auction-ID: A1-40330-110
Lifting cylinders from a dosan DX225. Pin diameter 80 mm Length center to center retracted: 1800mm Auction-ID: A1-47395-1909
maximum number of results exceeded
please refine your search
10 € 
