137,646 used machines on RESALE, but how to find them? Machine Search
Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible.
table length: 2200 mm table width: 1500 mm stroke height: 1900 mm weight max. in kg: 3000 kg total power requirement: 1,5 kW stroke speed - idle stroke upwards: 55 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,650 t dimensions of the machine ca.: 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2200 mm table width: 1500 mm stroke height: 1850 mm weight max. in kg: 2000 kg : 260 mm total power requirement: 1,5 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,45 t dimensions of the machine ca.: 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cap Liftinig and Arranging Machine to feed Capping Modules. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 50-100mm | power: 220V, 0.2kW | machine dimensions: L1250xW980xH2500mm | weight: 90kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Five Demag cranes are offered. Load capacity: 125kg-2000kg. Including trolley and controls. Inspection possible by arrangement.
An unused Fezer sheet metal vacuum lifter is available. Load capacity: 1000kg, max. sheet dimensions X/Y: 3000mm/1500mm, weight: approx. 200kg. An on-site inspection is possible.
capacity 40 tons; approx. 90 mm; without pallet; Auction-ID: A1-50476-20
Stock number: D830, In stock: Yes, Amount in stock: 1 pc., Item: Hydraulic Lifting Arm, Dimensions: H 1950-2450 x D 800 mm, Stroke: 1000 mm, Type: Manually operated
Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2P Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C
new jib of 3 tonnes, can extend to 2.51m Auction-ID: A3-46142-6413
new jib of 3 tonnes, can extend to 2.51m Auction-ID: A3-46142-6414
Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle
Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and
Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with
Rühle double jacketed vacuum tumbler with lifting arm for 200 liter meat bins, Busch vacuum pump, type: KC 0016 E, serial number: CZM120480309, 19 m³ per hour, inside dimensions: Ø 800 mm x 650 mm, total dimensions: 1950 mm x 1600 mm x 2500 mm.
2 pcs. Lifting beams Load capacity 57.5 t each. Total length each 6000 mm with 4 shackles each
18011101 Drive: Gasoline engine Auction-ID: A7-51315-20
maximum number of results exceeded
please refine your search
50 € 
