lifting crane used for sale

Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used

E-chain hoist, electric hoist, crane STAHL type R 12Fabr. No. 3437532 Year of construction 1979Load capacity: 1250 kgHook travel: 2.4 metresLifting speed for one load train: 8 m/min. Fine lifting speed for a load train: 2 m/min. Lifting speed for two load trains: 4 m/min. Fine lifting speed for two load trains: 1 m/min.2 load trains = 1250 kgEngine power: 1.25 / 0.25 kWNetz connection 380 volts, 50 Hz- without chain bag- trolley carriage for KBK 2 - double girder crane bridge, overhead cranegood condition; used

Viewing by appointment Auction-ID: A1-51065-57

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Indoor crane, crane, crane runway, crane rails, steel girders, medium-width I-beams, double-T-beams, IPE steel girders with manual trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Beam: IPE 240 -Carrier width: 120 mm -Equipment: 1x IPE steel beam, 1x roller chassis, 2x adjustable stops -Load capacity: 1000 kg -Dimensions: 5480/120/H245 mm -Weight: 182 kg

Crane frame 6800 mm This frame for cranes offers you the possibility to attach your crane and a trolley, as well as hanging scales or other hanging lifting equipment A-shaped supports for the necessary stability. Supports: Square tube 80 x 80 mm Double T-beam: 120 x 85 mm Length: approx. 6800 mm Height: approx. 4000 mm Width: 2000 mm Color: Yellow More items - new and used - can be found in our shop! International shipping costs on request!

Scheffer Indoor Crane System 500 kg For sale is a high-quality, fully functional indoor crane system (single-girder overhead crane) from the premium manufacturer Scheffer Krantechnik, equipped with first-class quality components from Demag. The system has a synchronous double hoist (tandem operation) with two independently movable Demag electric trolleys. This design is ideal for lifting long, bulky or heavy goods (such as profiles, pipes or plates) absolutely horizontally and safely at two points at the same time. Technical data for the load capacity & performance: Total lifting capacity of the system: 500 kg (0.5 tons) with simultaneous use of both hoists Load capacity per hoist: 250 kg individually Manufacturer's plate specification: 2 x 2 x 0.125 t (2 hoists in 2-strand operation with a base load of 125 kg each) Crane manufacturer: Scheffer Krantechnik (Leading ...

With ballast Auction-ID: A1-51207-2

Complete construction site package including a Potain Igo 26 self-erecting crane, its generator set as well as various lifting and handling accessories. 1. Potain Igo 26 Crane Brand: Potain / Manitowoc Crane Group Model: Igo 26 Type: Self-erecting crane / self-erecting tower crane Year indicated on plaque: 2008 Maximum deflection: 26 m Hook height: up to 20 m Maximum lifting capacity: 3,200 kg Boom end capacity: up to 1,100 kg Chassis transportable on axle Recessed/folding boom technology CE marking 2. Atlas Copco Generator Set Brand: Atlas Copco Model: QAS 30 KDS Year: 2008 Meter indicated: 9,050 hours Fuel: Diesel Rated power: 30 kVA Active power: approx. 24.1 kW indicated on the plate Voltage: 400 V Frequency: 50 Hz Rated Current: 43.6A Power Factor: 0.8 Indicated noise level: 91 dB LWA Weight indicated on the plate: 1.100 kg The QAS ...

Maximum capacity 1,800 kg Power supply control 12 V Hydraulic controls + visible radio control Flatbed truck mounting Crochet Yes CE marking: Yes Auction-ID: A3-46111-35875

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

Used lifting column unloader of the trays with a mechanical device used to unload the container process granules distributed on trays. The device is equipped with a shredder granules. The device has a complete DTR manufacturer. Specifications: max. capacity: 160 kg Tray size: 35x600x1000 mm max. number of trays: 8 max. process container height: 1300 mm prod.1997 year max. External dimensions: height. 3080 mm, width. 1550 mm, 1820 mm length Material: AISI 316 / AISI 304 implementation class: EEx e II T 3

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Wight approx. kg: 1400, Year :1996

Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.

Manufacturer: Trepel Hebebühne, Type: EH40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Year :1996

Technical data: with driven rollers Roll width: 1,200 mm Wide lifting table 1,400 mm Length lifting table: 3,350 mm Height retracted: 900mm Max lifting weight: 5 to Lifting height: 1,000 mm Platform size (length x width) With built-up roller movement: Roll length: Roll diameter: 164mm Roll spacing: 640mm

VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Installation consisting of 2 lifting tables (in the form of a staircase) each with 1,500 kg load capacity, lifting height: 1.2 m each, incl. base for the higher lifting table (1.5 m high), hydraulic unit and control cabinet. Tables can also be used individually.

with stage for Diosna W 401 A boiler mobile on wheels with brake Load capacity max. 600 kg lift and tilt dough into pickers and other bakery machines

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Manufacturer: Unbekannt, Year: ca.1995, Lifting power kg: 1000, Length mm: 2000, Width mm: 1000, Lifting hight approx. mm: ca.1500, Total hight mm: 250, Safety strip: yes, built-on roller conveyor: yes, Year :ca.1995

-suitable for Diosna Wendelkneter W 240 A boiler -Table lift tipper -Boiler pliers lock -with friction wheel drive and boiler shearer -mobile

Lift tipper Kemper HK 150 height 330cm -for Kemper Kessel or with stage for Diosna Kessel -Height 330cm -400 volts

TECHNICAL DATA: Dimension mm: 3300 x 1100 Payload Kg: 1000

Stage bracket for Kemper HK 150 lift truck

Stage bracket for Kemper HK 150 lift truck -for lifting and tilting Kemper boilers

Lift tipper stage for DK 250 boiler Kemper HK 200 -Lift tipper stage for WP DK 250 boiler -the stage is for Kemper HK 200 lift era -Stage with boiler drive -Stage with boiler shearer

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Load lifter: 4 pieces, holder Ø 80 mm -Shackle: M24 2 pieces per part -Price: complete -Dimensions: 250/155 / H250 mm -Weight: 36 kg / pc.

Diosna lift tipper HK 240 for spiral and lifting kneaders from 1971

Diosna D160 2G Lifting Kneading Machine used Boiler and kneading arm tinned Protective grille welded in one place two speeds Boiler was ground by the previous owner in some places does not affect the function, but should be mentioned Machine has been in stock at a dealer for a long time, is therefore dusty and dirty and should therefore be thoroughly cleaned before use Video about test run and other pictures available

Recording for lifting tippers for Diosna or Kemper lifting tipper models Dimensions: 120x110x125cm W/D/H

-Boiler Hebekiper Diosna HKV 224 -with Boku stage -suitable for boilers with metal pipes on the sides -Tilt height approx. 120cm -Height 245cm -Footprint approx. 170x107cm -Year of construction 2015

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW

-Boiler lift tipper from Kemper model HK 150 -with stage for Kemper President Kessel -Height approx. 198cm -Tipping height approx. 195cm

Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014

Diosna Lifting Tipper for Kemper SP 125 A Boiler Type: HK 224 Load capacity max. 600kg for SP 125 A spiral kneader boiler Can be driven on castors with locking device robust steel construction Overhauled at the end of 2010 Entry direction of the vats from the side Large tilt angle Tipping height of the boiler 210cm Tipping height: 210cm Height: 300cm

-Lifting tipper König -for König and Diosna Kessel -Weight 950 kg -Height: 235cm

Lifting strap, lifting strap, crane strap, lifting sling, round sling, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 10,000 kg -Length: 17.3 m -Number: only one piece available -Weight: 72 kg

Used lifting kneader DIOSNA, type: S 20 3G -In bakery condition- - for 20 kg dough - 3 gears - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.

- Lifting kneader Diosna S 35 - with stainless steel boiler - for max. 35 kg dough - with 2 speeds - with foot switch - with flour dust cover - Boiler diameter inside: 52cm - Inside boiler height: 35cm

Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock

Lifting table, lifting platform, lifting platform, car lift -Manufacturer: Nussbaum -Load capacity: approx. 1000 kg -Foot dimensions: 740 x 420 mm -Max. stroke: approx. 1600 mm -with control -Dimensions: 3200/1930/H450 mm -Weight: 494 kg

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Kemper Lifting Tipper Type: HK 150 Specifications: suitable for Kemper boilers SP 150 A and AL Load capacity: 1000kg Dumping height: 160cm Dimensions of lifting tipper: Height; 200cm Width: 100cm Depth: 160cm

Lifting mixer Kemper F 125 ASL extendable - with 2 speeds - with 2 automatic timers - with stainless steel lifting arm - max. 125kg flour or 200kg dough per kettle - with flour dust cover - Boiler with handle

Lifting kneading machine Diosna Capacity: 120 kg dough With protective grille 2 speeds via foot pedal Condition: Repaired