lift table used for sale

Automatic Winkel Wolf KILIA set with built-in option Automatic Lifter for carts type Laska 200 liters for automatic filling. Manufacturer Germany. The machine is completely factory refurbished with 1 year warranty.

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Electric chain hoist, chain hoist electric, with roller chassis used Manufacturer: LIFTKET Type: 071/53 Year of construction: 2008 Payload: 1000 kg two-strand lifting height approx. 5 m, single strand 10 m Lifting speed: 5.0 / 1.25 m/min with roller chassis Net weight approx. 60 kg Dimensions approx. 510 x 270 x 600 mm The chain hoist was only used for possible repairs in a mixing plant. So little has been used. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm

Loading unit: LMZ 3050 suitable for: L3030 and L3050 Max. sheet size, load/unload: 3000 x 1500 mm Max. sheet thickness, unload: 20 mm Cycle time: 230 sec

Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station

Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg Basic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking station Basic configuration: ? synchronous loader ? peeling device ? measuring device for thick sheets ? movable unloading rake ? raw material unpacking station ? maximal stack height on loading side is 90 mm ? maximal stack height on unloading side is 250 mm LiftMaster Compact options ? Additional pallet for finished parts ? Separation of thin sheets (s=1-2 mm) ? Scraper for slats (cleaning brush) ? Storage interface

Syspal Multipurpose lifter 2020, Stainless, mobile, max lift 105Kg, lifts up to 1900mm

Depositor Belmixing-Bowl-Lift 600 - Exhibition machine, year of construction 2022, brand new condition - Depositing range 50 - 600 ml Capacity up to 30 doses per minute Depositing range and output infinitely adjustable Machine mobile, with two locks Machine completely stainless steel Machine height pneumatically adjustable Piston rod with plastic butterfly valve for semi-liquid and flowable products with particles up to D = 25 mm Direct dosing from bowls or other containers Turn-over system for easy removal of bowls Pneumatic hand gun with hose L = 1,650 mm Vertical nozzle D = 25 mm Other accessories on request

- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside mm -Stroke: 290 mm -Total length: retracted 607 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 607/145/220 mm -Weight: 37 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL, Hydraulic cylinder, tilting cylinder, stroke 1590 mm -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Dimensions: 1895/90/110 mm -Weight: 19.5 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg/piece

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 50 to 100 mm -Load capacity: 6000 kg -Quantity: 1 piece available -Price: per piece -Weight: 29 kg/piece

brake drum -Bore: conical Ø 27 to 32 mm with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 4 drums available Price: per piece -Weight: 6.5 kg/piece

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Model: Liftomat for the transfer of dough divider into a RuLa movable on a frame Output approx.: 900 pcs/hour Connection 400V, 0.5 kW, 16A-CEE plug Used machine overhauled 6 months warranty With us you will find a large selection of bakery equipment!

Loading aid AHLBORN, type: Liftmatic for double width - Up and down movement automatically - 6 seconds from bottom to top - Manual loading - Condition: Very good - Speed: 15 cm/sec

Electric hand truck for easy transport up and down stairs

Size: 800 x 600 mm Equipments: Max. Load capacity: 1000 kg Max. Dimension: 800 x 600 mm

Toyota BT Quick Lift pallet truck 2300kg 1150 mm RA2231 Manufacturer: Toyota Fork length: 1150 mm Fork width: 156 mm Carrying surface width: 520 mm Maximum load capacity: 2300 kg Lifting range: 85 - 200 mm With quick lift, 2x pumping is sufficient to be off the ground, with a maximum load of 150 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

ProLift Pallet Stacker Device has hardly been used and is almost as good as new. - Year of construction: 2019 - Voltage: 230V 50 Hz - Power: 0.8 kW Installation instructions and material are enclosed in full. Shipping on pallet with forwarding agent possible throughout Europe. More machines available! Feel free to take a look at our advertisements. If you have any questions, just write or call: 0160 966 798 44 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Offer 25221 Specifications: - Load capacity 2000 kg - Projection approx. 3000 mm - Swivel radius approx. 180 ° - 2 lifting speeds approx. 3.0 + 0.75 m/min - Hackenweg approx. 3000 mm - Operation of the chain hoist via hand remote switch - Manual swivelling of the boom + trolley movement - Boom IPE 300 - Overall height with swivel arm carrier approx. 1220 mm - Connection 400 V - Weight approx. 500 kg - Test book

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 2500 mm weight: 275 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture 2005 electric scissor pallet truck Load capacity 1,000 kg Lifting height approx. 80 cm Delivery date: immediately Price on request. We supply and install worldwide.

2x BT lifter for paper rolls.

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

Height=19 m, Overall length= 90 m, Overall width= 125 m, Description Glimek Bowl lifter for mixer Glimek SP-240

General SKUR0227 LocationBarneveld MakeDalmec TypePartner No.917746 Year of construction1991 Main Features MaterialMild steel Specified Features - Miscellaneous transport MaterialMild steel Miscellaneous transport Capacity150 kg Information Total height0,8 M Weight610 Kg Floorspace1,7x1,7 M Extra Specifications- max. lifting weight 150 kgMiscellaneous transportDalmecConveying systems > Miscellaneous transportBrand > Dalmec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

original Kodak laser head lift for TH3

This 3-axis TRUMPF TruLaser 5030 + LiftMaster was manufactured in 2010. It features a watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster aIf you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information.

General SKU271X310 MakeLiftVrac Mach.No.1401 Year of construction2014 Main Features Motor1.5 KW Length6000 mm Width350 mm Specified Features - Conveyor belt MaterialStainless steel Elevator beltcheck Trough type conveyor beltcheck Belt width350 mm Belt length6000 mm With motor1,5 kW, 380-415 volt, 1485 volt With variable speed drivecheck Belt speed57 rpm Outlet height1600 mm Information LocationBarneveld Inclined on framecheck Mounted on wheelscheck With switchcheck Floorspace6,20x1,50 m Total height2,40 m Weight700 kg CEcheckConveyor beltsLift VracConveying systems > Conveyor beltsBrand > Lift Vrac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Pipe: Outer diameter mm -Stroke: 250 mm -Total length when retracted: 500 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 8 pieces -Dimensions: 500/200/H135 mm -Weight: 19 kg/piece

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 25 mm -Type: E0400180H20025 E0400180H2/0025 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 240 mm -Hole: Hole Ø 20 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 240/50/H68 mm -Weight: 2.4 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 45 mm -Stroke: 170 mm -Total length: retracted 580 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Number: 2 pieces -Price: per piece -Dimension: 580/95/H125 mm -Weight: 16.9 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Stroke: 385 mm -Total length: retracted 675 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 16 pieces -Price: per piece -Dimensions: 675/145/H270 mm -Weight: 41 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder single-acting stroke 20 mm -Type:E0400180H30020 T17 / E0400180H 30020 T19 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 220 mm -Hole: 1x Ø14 mm / 5x Ø15 mm -Number: 6x cylinders available -Price: per piece -Dimensions: Ø 50 x 220 mm -Weight: 2.8 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Tube: Ø outside mm -Stroke: 250 mm -Total length retracted: 600 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Dimensions: 460/170/H140 mm -Weight: 17.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Tube: Ø outside mm -Stroke: 304 mm -Total length retracted: 600 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 600/225/H135 mm -Weight: 24 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 385 mm -Total length: retracted 683 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 9 pieces -Price: per piece -Dimensions: 683/145/H270 mm -Weight: 41 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 32 mm -Pipe: Outer diameter mm -Stroke: 170 mm -Total length when retracted: 405 mm -Mount: Bore Ø 30 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 3 pieces -Dimensions: 405/110/H100 mm -Weight: 9.3 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 302 mm -Total length: retracted 640 mm -Mount: Bore Ø 40 mm -Quantity: 2 pieces -Price: per piece -Dimensions: 640/145/H210 mm -Weight: 38 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -double-acting -Manufacturer: GSL, hydraulic cylinder, tilting cylinder, with control valve, stroke 1590 mm -Type designation: D040025-Z T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Number: 6 cylinders available -Price: per piece -Dimensions: 1895/105/110 mm -Weight: 22.8 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -Manufacturer: GSL, hydraulic cylinder, tilt cylinder double acting with control valve, stroke 1590 mm -Type designation: D040025-Z2 T06 - Piston rod: Ø 25 mm / holder Ø 20 mm -Quantity: 3x cylinders available -Price per piece -Dimensions: 2045/120/90 mm -Weight: 22.5 kg / pc.