lift table used for sale

We offer an LTG-TowerMax L 30.0-500-1300-1270-6000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6000 mm Overall width 1620 mm Overall depth 4150 mm Total payload machine up to 2 x 15,000 kg 20 carriers for up to 500 kg payload each in clear usable dimensions: W = 1300 mm T = 1270 mm (special depth) Usable height up to 50 to 750 mm Start of the operating opening in 300 mm above OKFF, then xxx mm high, with manually operated lifting door, Engine power Vertical drive xx kW / 400 Volt Horizontal drive xx kW / 400 Volt Colour scheme beige/beige, galvanised straps Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer LTG-TowerMax L 30.0-400-2460-825-4889 storage systems modernized by us with a completely new StoreControl L control system. currently 6 identical machines are available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

; Gross weight [kg]: 2600; Inspection Date: 2025-10-22; Amount of previous owners: 1; Maximum lift capacity [kg]: 200

Suspension With manual landing gear Number of Load Lines 1 Lifting speed main lift 8 /2m/min Chain hoist version 071/54 Dead load 42 kg Duty cycle fine stroke 25 % Frequency 50 Hz Hub 3000 mm IP protection class manual switch IP 55 Insulation class F Circuits per hour 240 Control cable length 3500 mm Depth 506 mm Engine Group ISO M5 Buoyancy 500 kg Flange width 66 - 135 mm Lifting speed fine stroke 2 m/min Width 266 mm Duty cycle 0 % Main stroke duty cycle 60 % Housing RAL Colour RAL 1007 daffodil yellow Height 413 mm

- For vertical shooting - Load capacity - 250 kg - Suction plate diameter 2 x 300 mm

Cap Liftinig and Arranging Machine to feed Capping Modules. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 50-100mm | power: 220V, 0.2kW | machine dimensions: L1250xW980xH2500mm | weight: 90kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

LIFTING AUGER, for regrinds, box housing mm.400 outer Ø, internal spiral 300 mm Ø, bearings with dust protection, Length 8,5 mt., Collection hopper 900 x 500 mm (or bespoke), exhausting outlet, intermediate supports every 3 mt., Bonfiglioli gearbox, 5,5 kw drive, complete with Users manual. CE compliance and el,.drawings, installed power - used power in work: about 60-65% : 5.5, availability: ca 4 weeks from confirmation, conditions: new machine, type: to collect and lift materials

Lift Rope: Steel reinforced fibre core F3, diameter 13mm Manufacturer: Gustav Wolf

Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible.

General SKU337U827 LocationBarneveld MakeServolift TypeHF No.10890 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Height3950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Lifting + tilting machinecheck Max. weight200 kg Lifting heightMin. height 440mm, max. height 3950 mm Hydraulic drivecheck With hydraulic unitcheck Lotz, Type: MC4 Motor230/400 volt, 1,5 kW, 1450 rpm Suitable for product sizes load drum diameter 560mm Information Total height5,3 m CEcheck With switchcheck Floorspace1x2,2 mLifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

General SKU054E249 LocationBarneveld MakeL.B. Bohle GmbH Ennigerloh TypePharma Hubsaul HS-200 Ex No.280 Year of construction1987 Main Features MaterialStainless steel Motor0.75 KW Height2395 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machineStationary lifting column (1x) Max. weight210 KG Lifting height2395mm (outlet height) Hydraulic drivecheck With hydraulic unitcheck Motor0,75 KW Information With switchWith 2x Pharma container type PC-250 Floorspace1,8x0,8 M Total height3,5 M Extra Specifications- 2x container dia. 700x400mm, Conical bottom 530mm, Outlet dia. 200mm Lifting/tilting machinesL.b. BohleConveying systems > Lifting/tilting machinesBrand > L.b. Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU236T269 LocationBarneveld MakeBohle TypeHS600 No.1020957001 Year of construction2011 Main Features MaterialStainless steel Motor0.55 KW Height3400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machinecheck Max. weight600 kg Lifting height3400 mm Mechanical drivecheck Motor0,55 kW Information Total height3,2 m Weight650 kg CEcheck Floorspace0,8x0,7 mLifting/tilting machinesBohleConveying systems > Lifting/tilting machinesBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU430W1387 LocationBarneveld Makeservolift Year of constructionunknown Main Features MaterialStainless steel Height500 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4306 (304L) Lifting machinecheck Lifting height500 mm Hydraulic drivecheck Information Floorspace1,2x0,8 m Total height1,5 m Extra Specificationsinlet diameter: 700mm outlet diameter: 250 mm Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU394U1145 LocationBarneveld MakeServolift TypeHS No.H337-12093 Year of construction2009 Main Features MaterialStainless steel Motor2.2 KW Height2850 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L), Stainless steel 1.4541 (321) Lifting machinecheck Max. weight1000 kg Lifting height2850 mm Hydraulic drivecheck 150 bar Pneumatic drivecheck 6 bar With hydraulic unitcheck Motor2,2 kW (500 V) Information With switchcheck Weight1650 kg CEcheck Floorspace1,5 x 3 m Total height4,3 m ATEX compatiblecheck Extra SpecificationsSwing angle 180 degree. lifting stroke 1600mm Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKU382X963 LocationBarneveld MakePharmatech No.SL10244 Year of construction2001 Main Features MaterialStainless steel Motor2.5 KW Height3500 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting + tilting machinecheck Max. weight250 kg Lifting height3500 mm Mechanical drivecheck ( 0.25 kW to tilt the vessel) Hydraulic drivecheck (2.6 kW to lift the vessel) With hydraulic unitcheck Motor2.6 kW Suitable for product sizesDia 550 mm Lifting/tilting machines Capacity250 kg Information Mounted on framecheck With switchcheck Floorspace1 x 2 m CEcheck Total height3,8 m Weight1200 kg Extra SpecificationsThis hoist was installed in its original configuration with multiple accessories. - Pharmatech flexisieve 350 0.1m², SKU 382X961 (SOLD) - Pharmatech 2000 ltr double cone blender SKU 382X962 - Pharmatech floor scale, SKU: ...

Work platform self-propelled articulated work platform with boom PB Type: S171-12ES Year of Make: 2013 Load capacity 400 kg Platform dimensions approx. 2.79 x 1.17 m Platform extension approx. 100 cm Transport dimensions approx. 3.28 x 1.22 x 3.28 m (height railing folded down: 2.32m) Weight approx. 5120 Kg Working height approx. 17.1 m Platform height approx. 15.1 m Movable up to 17.1 m working height (indoor use) Self-leveling support Shipping no problem. Location of the machine is 94244 Teisnach ( See pictures ACTUAL - condition) Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging c ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2021 Model: Modula Lift ML 50D Height: ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2013 Model: Modula Lift ML 50D Height: ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

General SKU366W1585 MakeServolift TypeHF LocationBarneveld CEcheck Main Features MaterialStainless steel Motor1.5 KW Height3000 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightApprox 3 m With hydraulic unitcheck Motor1,5 kW, 230/400 volt, (Ex) Information No.10765 Year of construction2003 With switchcheck Floorspace1,0x0,80 m Total height5,40 m Weight540 kg ATEX compatiblecheckLifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

General SKU349U857 MakeHywema LocationBarneveld CEcheck TypeKV 12-B Main Features MaterialStainless steel Motor2.2 KW Specified Features - Lifting/tilting machine Lifting + tilting machinecheck Max. weight1000kg Hydraulic drivecheck With hydraulic unitcheck Motor2,2kw, 220/380Volt Information No.69397/01 Year of construction2021/12 Mounted on framecheck With switchcheck With switchgearcheck Floorspace2,1x2 m Total height3m Weight1350 kg Extra SpecificationsThe Hywema is equipped with a vibration motor and a dosing lock.  : Vibration motor data: Brand: Venanzetti vibrazion Type: VV05N/2 C1 Voltage: 230/400 Volt Power: 0.17 kW Equipped with CE and EX  : Dosing lock data: Brand: Baumgarten Type: 200aL VA Motor: 0.25 kW, 230/400 Volt Lock speed: 15 rpm Outlet diameter: 200 mm Equipped with CE Lifting/tilting machinesHywemaConveying systems > Lifting/tilting machine ...

General SKU277T631 LocationBarneveld CEcheck MakeGlatt Main Features MaterialStainless steel Motor0.75 KW Height2700 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4571 (316Ti) Lifting machinecheck Lifting + tilting machinecheck Max. weight200 kg Lifting height2700 mm Hydraulic drivecheck With hydraulic unitcheck (Ex) Motor0,75 kW 230/400 Volt Information TypeELD 60 Year of construction2016 Mounted on framecheck With switchcheck Floorspace2x0,6 m Total height3,9 m Weight900 kg ATEX compatiblecheckLifting/tilting machinesGlattConveying systems > Lifting/tilting machinesBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...

General SKU900WP043 LocationBarneveld MakeMeiller (DE) Specified Features - Lifting/tilting machine MaterialMild steel Information TypeHubstapler Mach.No.135271 Year of construction2010 Mounted on wheelscheck Weight180 KG Extra Specificationslifting capacity 100 kgLifting/tilting machinesMeillerConveying systems > Lifting/tilting machinesBrand > Meiller What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU244K215 MakeFördertechnik AG Münchenstein TypeFT-150 S, Slewable No.96310-130/17079 Year of construction1996 LocationBarneveld Main Features MaterialStainless steel Height2400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting + tilting machine(1x) Max. weight150 KG Lifting height± 2400mm Mechanical drivecheck Motor400 Volt (Ex) Suitable for product sizes± 800x800mm Information With switchgearcheck Floorspace2,0x1,2 M Total height3,1 M Weight500 KG ATEX compatiblecheckLifting/tilting machinesFoerdertechnikConveying systems > Lifting/tilting machinesBrand > Foerdertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnev ...

Lifter for 200 liter meat bins, type: SKV200M-1-PKHR, serial number: 1686, lifting height: 1810 mm, total dimensions: 1400 mm x 1100 mm x 2700 mm.

Lifter for 200 liter meat bins, lifting height: 3450 mm, total dimensions: 1025 mm x 1200 mm x 3950 mm.

General SKU025C042 MakeServo-Lift GmbH / Pharmatech TypePharmalift Hoist No.E-4398 A Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Height2550 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machineSlewable IBC hoist (1x) Max. weight150 KG Lifting height695-2550mm Hydraulic drivecheck With hydraulic unitcheck Motor1,5 KW, 230/400 Volt Information With switchgearcheck Floorspace1,8x1,0 M Total height2,9 M Extra Specifications- With 1x IBC (316), Dim. 500x500x400mm, Conical bottom 350mm Lifting/tilting machinesDiscountServoliftConveying systems > Lifting/tilting machinesDiscountBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

Lifting capacity 1000 kg Lifting height 2000 mm Fork length 1100 mm Fork width 510 mm Min. fork height 85 mm Load Centre 600 mm Weight: 475 kg Mast height 2350 mm driven Mast height 2350 mm retracted Charger

Side forklift JUMBO 5 t with fork adjustment, very good contition!; good

Double Decker - stackers, fork length 1150 mm, operating hours stand 13.01.2012 approximately 779, unladen weight 870 kg, capacity 2000 kg, height 2100 mm, charger; very well

Scissor lift off-road - work platform with crawler chassis and automatic support. HERED LIFT Type: HC0610E Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 0.7m x 1.65m Extendable platform + 0.90 m Transport dimensions 2.35 m x 1.24 m Track width: 1.07 m Height: 2.26 m Railing folded down Height: 1.93 m Weight approx.: 1900 Kg Working height: 7.8 m Platform height: 5.8 m Automatic levelling support Steel chains with non-marking plastic pads. Climbing ability up to: 40° Overload Shutdown: Battery-powered 24 V / 260 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty For further dates, delivery time and availability, please enquire. Depending on availability, the machine can be viewed and test driven at our warehouse. Subject to pri ...

scissor lift; Working platform lifting platform: Lifting platform HERED LIFT Type: HS1012H Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.22 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.50 m x 1.18 m Height: 2.49 m Railing folded down Height: 1.94 m Weight approx.: 2810 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25° Battery-powered 24 V / 200 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquire. Due to EU requirements, the offer is aimed exclusively at tradespeople. Depending on availability, the machine can be viewed and test driven at our warehouse. Sub ...

Syspal Tote bin lifter Stainless tote bin lifter, lifts to 1.5m, battery powered, 3Ph

electric box lifting device, lift lift Brand: KLB Type: Lifter 1000 Built: 2013 Load capacity: 2000N, approx. 200kg maximum lifting height: 102 cm Crate dimensions: 62 x 62 cm Trolley with spindle drive Forks to hang in Cable for power supply Control panel with cable This item is only sold to traders. All information without guarantee

; Gross weight [kg]: 2000; Inspection Date: 2026-02-13; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 2175; Inspection Date: 2026-02-13; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200

working length: 6000 mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello, We hereby offer you a used articulated telescopic work platform on wheels (telescopic aerial platform) from the manufacturer TEREX AERIALS, type TA30N Boom Lift. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: TEREX AERIALS Type TA30N Boom Lift Built in 1999 Operating hours 887 hours Transport dimensions retracted 4.20 x 1.22 x 2.12 m (L x W x H) Curb weight 4800 kg Max. height of the floor of the working cage 9.14 m Max. working height 11.14 m Max. working width 5.20 m Outer turning circle 3.50 m Max. climbing ability 20 % Max. travel speed, boom retracted 4 Km/h Max. travel speed, boom extended 0.75 Km/h Safe load capacity (2 persons) 225 kg Max. noise level 70 dbs at 3m Operating Temperature Range -5°C to 40 ...

; Gross weight [kg]: 2450; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 2300; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 3300; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 2300; Maximum lift capacity [kg]: 200