lift table used for sale

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/D-cJO92WeE0 - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery:08/03/2024 24V 3PzS 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45450-322

Vemag vacuum filling machine with lifter for 200 liter meat bins, model: HP12E, number: 1650655, year of construction: 2016, 400-460 V, 3 Ph, 50/60 Hz, 27 A, 16 kW, Vemag vacuum pump, type: KC 0040 D IZ0, serial number: D15251636, year of construction: 2015, capacity: 40 m³ per hour, dimensions: 2300 mm x 1380 mm x 2050 mm.

Laska frozen block flaker with lifter for frozen blocks, type: GS510, serial number: Y6242, 3 x 380 V, 50 Hz, 18.5 kW, infeed height: 1750 mm, block cross section: maximum 500 mm x 300 mm, capacity: up to 4000 kg per hour, weight: 1000 kg, total dimensions: 1700 mm x 1800 mm x 2100 mm.

Ekomex double paddle vacuum mixer with lifter for 200 liter meat bins, type: ML-1000V, serial number: 14040801, year of construction: 2018, 3 x 400 V, 50 Hz, 9 kW, Busch vacuum pump, type: KB 0040 D 100, serial number: D16410645, year of construction: 2016, volume: 48 m³ per hour, total dimensions: 2400 mm x 2100 mm x 2700 mm.

Frey Maschinenbau vacuum filling machine with lifter for 200 liter meat bins, type: F-Line F223, machine number: F223PT1092864, year of construction: 2014, 400 V, 50/60 Hz, 10.45 kW, Busch vacuum pump, type: RC 0021 C 3Z3, serial number: D18180231, year of construction: 2018, capacity: 24 m³ per hour, total dimensions: 2000 mm x 1300 mm x 2100 mm. Including box with various parts.

Hook mount: equipped with a knowledge type 14,000, crane, rotator, support legs and aluminum side panels. Auction-ID: A1-40135-222

Koni car lift professionally disassembled track length 4150mm, width between columns 2450mm. Auction-ID: A1-42014-270

You are responsible for dismantling this lot. There are no aids available. Auction-ID: A1-42014-251

Wheel grab lift truck / bus / agri lifting system size per column approximately 1150x1150x2500mm. Auction-ID: A1-42014-269

Equipped: Custers R20EHS trailer aerial platform (built in 2006) with approx. 20 m working height, 200 kg working load (2 persons + 40 kg), 160 bar hydraulic working pressure, 230 V power supply and a dead weight of 2830 kg. 2 movers, weight set, Auction-ID: A1-40135-52

Scissor lift already professionally disassembled and including 1 pallet Auction-ID: A1-42014-271

General information Brand: Genie Model: GS-2646 Type: Scissor lift (scissor lift) Manufacturer: Terex / Genie Year of construction: 2009 Identification Model code: GS 2646 Serial number: GS4603-50370 (as shown in the plate) Chemical unit number: ES00142 Capacity & use Maximum working load: 454 kg Number of people (inside): 2 Number of people (outside): 2 Machine intended for use: indoor and outdoor Wind & load Max. wind speed (outside): 12.5 m/s Max. wind speed (indoor): 0 m/s Max platform force: 400 N Dimensions (platform) Max. platform height: ± 7.8 m Platform extendable: Yes (extension available) Safety information Multiple warning stickers present (DANGER / IMPORTANT) Use according to instructions required Only trained personnel are allowed to operate Machine complies with EU directive EN 280 Other info Manufacturer location: USA (Genie / Terex)  ...

Features: 0.91m extendable platform, fold-down handrails, self-closing gate, removable platform console box, lanyard attachment points, fully proportional joystick control with integrated thumb switch, proportional lift/lower speed control, joystick for lifting and traveling, load detection system, two speed settings, direct electric drive on two wheels, 8 x 6V 370 A/hr deep cycle batteries, automatic traction control, automatic 20 amp battery charger, automatic rear wheel brakes, alarm and indicator light in case of tip-over, steel scissor guards, oscillating rear axle, lift/lashing eyes, lubrication-free scissor arm bushings, scissor maintenance support, Ground control selector, key lock, battery status indicator, hour meter, horn, manual lowering cable, Non-Marking tires, working height 14.19 m, platform height – raised 12.19 m, folded height 2.80 m, platform handrail height 1.10 m, ...

Width between the columns 2600mm. Already disassembled Auction-ID: A1-42014-272

Construction hoist / passenger lift 7 persons lifting capacity 2000 Kg equipped with BS platform tow rope 50 meters including roof good working condition and complete Auction-ID: A1-40135-77

Elevator belt with cleats suitable for Asa-Lift T255DF Auction-ID: A1-40135-312

Features: 0.90m extendable platform, fold-down handrails, semi-swing gate, removable platform console box, lanyard attachment points, fully proportional joystick steering With integrated thumb switch, proportional lift/lower speed control, joystick for lift and drive, load detection system, swinging doors for battery/electric compartments, automatic 20-amp battery charger, dual motor front-wheel drive and steering, automatic brakes on both wheels, emergency brake release, battery status indicator, hour meter, lubrication-free bushings for the scissor arms, maintenance support for the scissor arms, manual lowering function, horn, lashing eyes, forklift openings, Non-Marking full rubber 323 x 100 tires, working height 7.72 m, platform height – in raised position 5.72 m, folded height 2.02 m, platform handrail height 1.10 m, folded height (handrails folded) 1.59 m, platform dimensions (W  ...

Elevator belt with cleats suitable for Asa-Lift T255DF, pitch 28. Auction-ID: A1-40135-313

<br>With near head UNION SPECIAL Maximum sack length: 120 cm<br><br><br><br>Verf Gbar: now

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms

; very good

Maho UIniversaltisch

Technical data: 2009 overtaken Table load: 100 to. Table diameter: 3500 mm Table diameter with extension arms: 6000 mm Plan disc: 8 double T-slots Slot distance: 180 mm incl. 8 extension arms to increase the diameter of the washer to 6000 mm.

Pneumatic round-table table 400 mm

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

With stitching head UNION SPEZIAL Maximum sack length: 120 cm Available: now

Many thanks for your interest on our new Heating/cooling table for chocolate or sugar-, candy dough, please find follow our offer: Heating table / cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 1200 x 800 x 800mm / or (lxbxw) : 800 x 600 x 800mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: folded plates made of stainless steel Standing on 4 feet, (square tube 50 x 50) optional height adjustable with two wheels and two castors water heated, closed system with electr. Thermostat, heat exchanger, circulation pump, safety valve 0.5 bar) Plate heat exchanger technical changes reserved Wir bieten diese Maschine als Neumaschine zum Verkauf an. I offer this machine as New machine

Band conveyor 14 cm wide - 2.00 m long use as a stack table behind filling arrangements possibly nevertheless, height of the stack level (normally 0.75m) is changeable on 0.95 m. the band conveyor can be put about a Poti in the speed.

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

Motor data -1/1.9 HP -710/1420 RPM -380 Volt -3.7/3.8 amps

Div. test tables with excerpts or measurement Setup, height-adjustable feet. Individually to build up. Price for example corner plate 30, desktop incl. feet 80, Meßinstr. table incl. feet 90.

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW

Make: GÜNTNER Type: GVH 080.1B/2x5-L(S) Built: 2005 Max Pressure: 32bar Min. Pressure: -1bar Max temperature: 100C min. Temperature: -50C Volume: 380.1 litres Price on request