128,058 used machines on RESALE, but how to find them? Machine Search
It is a used, reconditioned Diosna mixer S 120 Plus (for max. 120kg dough / 75kg flour) for sale. The machine is in very good condition and fully functional. The mixer has a stainless steel bowl, stainless steel kneading arm, a flour dust cover, two speeds and is mobile. The machine has a new control system with two timers. A video can be sent on request. Price on request.
Would only be needed very rarely, see operating hours. Battery operated Auction-ID: 042-LFY-4
\cf1Slim design (space requirement only 0.3 square metres) with electromechanical lift drive Permissible load 1,000 kg Lift mast with floor and ceiling bearing (included in scope of delivery) Overall height 3,700 mm without ceiling bearing Overall height 3,857 mm with ceiling bearing for room height 4,007 mm Operation via remote-controlled touch panel outside the danger zone Jog mode and semi-automated process sequences through the use of a microcontroller with touch panel visualisation Motor with spring-applied brake Button for operating the discharge flap Button for activating the vibrator Safety catch to prevent hazards caused by sudden and unintentional dropping of the load arm Load support for Bohle container MCG 1200 and MCG 1600 (container not included in the scope of delivery) Insertable drum frame with load turning gear for 200 ...
Concerns 2 pieces; Attention, blue cuff leak! Auction-ID: A1-41991-29
Stelcon Plate Lifting Chain, WLL 5T Auction-ID: A1-45424-121
; Gross weight [kg]: 2760; Inspection Date: 2025-12-12; Amount of previous owners: 1; Maximum lift capacity [kg]: 200
Product number: 2980 Type: 300S Serial number: 4066 Year of construction: 2014 Model: B Load capacity: max 350 kg Tilting height: 2800 mm Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 1700 x 1800 x 3600 mm Weight: 500 kg Including safety light grid and proximity sensor
Slim design (space requirement only 0.3 square metres) with electromechanical lift drive Permissible load 1,000 kg Lift mast with floor and ceiling bearing (included in scope of delivery) Overall height 3,700 mm without ceiling bearing Overall height 3,857 mm with ceiling bearing for room height 4,007 mm Operation via remote-controlled touch panel outside the danger zone Jog mode and semi-automated process sequences through the use of a microcontroller with touch panel visualisation Motor with spring-applied brake Button for operating the discharge flap Button for activating the vibrator Safety catch to prevent hazards caused by sudden and unintentional dropping of the load arm Load support for Bohle container MCG 1200 and MCG 1600 (container not included in the scope of delivery) Insertable drum frame with load turning gear for 200 l M ...
Product number: 2981 Type: 300S Serial number: 4067 Year of construction: 2014 Model: B Load capacity: max 350 kg Tilting height: 2800 mm Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 1700 x 1800 x 3600 mm Weight: 500 kg Including safety light grid and proximity sensor
For sale I offer a hydraulic spreader / lifting wedge from Holmatro with accessories. The hydraulic spreader is an unused Exhibit with slight traces of storage. Further condition please see the pictures. Details: Holmatro HVLV 16 S 2, wedge for vertical lifting Operating pressure: 720 bar Stroke: 20 mm Min. insertion opening: 9 mm 16 ton with spring retraction Shipping available for an extra charge. Hydraulic spreader is workshop tested and sold immediately ready for use with new UVV test and can be tested on site. Other accessories available on request. # Holmatro # Hydraulic spreader # Lifting wedge # Spreader
Lifting kneader Diosna Kneader extendable Model: S 120 A for max. 120 kg dough Stainless steel kettle and kneading arm Dough machine with flour dust hood 2 tank cars, 180 litre boiler 2 gears, with protection circuit Timer, EMERGENCY STOP DGUV V3 tested Approx. dimensions: 900 x 1000 x 1400 mm, WxDxH Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty Option: Maintenance contract E-Box Service Package More TOP Lifting Mixers in stock!
Lifting kneader Diosna Kneader extendable Model: D 200 A for max. 200 kg dough/TA 160 (rye mixed bread dough) Stainless steel boiler 300 liters Dough machine with flour dust hood according to HACCP 2 tank cars with tilting device Stainless steel kneading arm with turning mechanism 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 32A-CEE plug Used machine overhauled with 6 months warranty Option: Ground fastening Delivery Maintenance contract E-Box Service Package Many more lifting kneaders in stock!
- old German quality, virtually indestructible. - Aluminum boiler - With steel lifting arm - without lid / protective grille - with age-related signs of wear and tear and Wear and tear see photos - Shell diameter 76 cm (inside) - Shell height: 44cm (inside) - Height: 114 cm (lowest position) - Width / Length: 99cm x 83cm - 380 volts
used lifting mixer Diosna D 200 A Plus extendable, in baker's condition, checked and tested, works perfectly, 200 kg dough per kettle, 1 o'clock, 2 courses, with 1 stainless steel kettle, stainless steel kneading arm, if necessary with another kettle for an additional 4,000€
Pump unit size approximately 900x700x700mm. 400Volt Auction-ID: A1-45188-23
Used Lifting Kneader KEMPER, Type: F 75 -Refurbished- - for 75 kg flour or 120kg dough - Incl. dust cover - Condition: Very good, ready to use - 6 months warranty Visits and test runs are possible by arrangement.
Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600 Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Palettenheber / Pile Hoists - Stack Lift Baumann NU-FO Baujahr / Year 1989 - Serial-No. 51587 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 1000KG Hubhöhe / Lifting height max. 1000mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Palettenheber / Pile Hoists - Stack Lift Baumann NUP 1600 Baujahr / Year 2005 - Serial-No. 52970 Format / Size max. 1500 x 1185mm Hebekapazität / Loading capacity max. 1600KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Palettenheber mit Wanne / Pile Hoists - Stack Lift Polar L-1000-W-3 Baujahr / Year 1991 - Serial-No. 6172025 Format / Size max. 1100 x 750mm Hebekapazität / Loading capacity max. 1000KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Palettenheber - Pallet Lift Butler Year 1985 Tagfähigkeit / Lifting Capacity 1.200KGS Hub / Lifting high 1.000mm Pressluftanschluss / Air supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
DIOSNA Lifting kneader S 120 Plus, 120 litres Auction-ID: A7-45677-50
; Gross weight [kg]: 2760; Inspection Date: 2026-02-06; Amount of previous owners: 1; Maximum lift capacity [kg]: 200
Lifting mixer Diosna D200A extendable + 3 boilers - Extendable Diosna lifting kneader - With 3 stainless steel kettles - per kettle for max. 200kg dough or for amx. 125 kg flour - 2 speeds slow and fast - Machine completely repainted
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Body lifting and alignment device Strap belt table with lifting and alignment device Fezer Vacuum Lifter Control: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm More items - new and used - can be found in our shop! International shipping costs on request!
maximum number of results exceeded
please refine your search
10 € 
