129,254 used machines on RESALE, but how to find them? Machine Search
Lifting capacity 1000 kg Lifting height 2000 mm Fork length 1100 mm Fork width 510 mm Min. fork height 85 mm Load Centre 600 mm Weight: 475 kg Mast height 2350 mm driven Mast height 2350 mm retracted Charger
Side forklift JUMBO 5 t with fork adjustment, very good contition!; good
Double Decker - stackers, fork length 1150 mm, operating hours stand 13.01.2012 approximately 779, unladen weight 870 kg, capacity 2000 kg, height 2100 mm, charger; very well
Scissor lift off-road - work platform with crawler chassis and automatic support. HERED LIFT Type: HC0610E Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 0.7m x 1.65m Extendable platform + 0.90 m Transport dimensions 2.35 m x 1.24 m Track width: 1.07 m Height: 2.26 m Railing folded down Height: 1.93 m Weight approx.: 1900 Kg Working height: 7.8 m Platform height: 5.8 m Automatic levelling support Steel chains with non-marking plastic pads. Climbing ability up to: 40° Overload Shutdown: Battery-powered 24 V / 260 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty For further dates, delivery time and availability, please enquire. Depending on availability, the machine can be viewed and test driven at our warehouse. Subject to pri ...
scissor lift; Working platform lifting platform: Lifting platform HERED LIFT Type: HS1012H Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.22 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.50 m x 1.18 m Height: 2.49 m Railing folded down Height: 1.94 m Weight approx.: 2810 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25° Battery-powered 24 V / 200 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquire. Due to EU requirements, the offer is aimed exclusively at tradespeople. Depending on availability, the machine can be viewed and test driven at our warehouse. Sub ...
electric box lifting device, lift lift Brand: KLB Type: Lifter 1000 Built: 2013 Load capacity: 2000N, approx. 200kg maximum lifting height: 102 cm Crate dimensions: 62 x 62 cm Trolley with spindle drive Forks to hang in Cable for power supply Control panel with cable This item is only sold to traders. All information without guarantee
Syspal Tote bin lifter Stainless tote bin lifter, lifts to 1.5m, battery powered, 3Ph
working length: 6000 mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: 4500,6000 mm profile spindle: 3 Stück main drive: 24 kW Control: Siemens 840d Working Process Logos Life Evo XS 2345 ------------------------------- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic Winkel Wolf KILIA set with built-in option Automatic Lifter for carts type Laska 200 liters for automatic filling. Manufacturer Germany. The machine is completely factory refurbished with 1 year warranty.
working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h
4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm
Electric chain hoist, chain hoist electric, with roller chassis used Manufacturer: LIFTKET Type: 071/53 Year of construction: 2008 Payload: 1000 kg two-strand lifting height approx. 5 m, single strand 10 m Lifting speed: 5.0 / 1.25 m/min with roller chassis Net weight approx. 60 kg Dimensions approx. 510 x 270 x 600 mm The chain hoist was only used for possible repairs in a mixing plant. So little has been used. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.
Loading unit: LMZ 3050 suitable for: L3030 and L3050 Max. sheet size, load/unload: 3000 x 1500 mm Max. sheet thickness, unload: 20 mm Cycle time: 230 sec
Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station
Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg Basic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking station Basic configuration: ? synchronous loader ? peeling device ? measuring device for thick sheets ? movable unloading rake ? raw material unpacking station ? maximal stack height on loading side is 90 mm ? maximal stack height on unloading side is 250 mm LiftMaster Compact options ? Additional pallet for finished parts ? Separation of thin sheets (s=1-2 mm) ? Scraper for slats (cleaning brush) ? Storage interface
Syspal Multipurpose lifter 2020, Stainless, mobile, max lift 105Kg, lifts up to 1900mm
- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.
Depositor Belmixing-Bowl-Lift 600 - Exhibition machine, year of construction 2022, brand new condition - Depositing range 50 - 600 ml Capacity up to 30 doses per minute Depositing range and output infinitely adjustable Machine mobile, with two locks Machine completely stainless steel Machine height pneumatically adjustable Piston rod with plastic butterfly valve for semi-liquid and flowable products with particles up to D = 25 mm Direct dosing from bowls or other containers Turn-over system for easy removal of bowls Pneumatic hand gun with hose L = 1,650 mm Vertical nozzle D = 25 mm Other accessories on request
; Gross weight [kg]: 2000; Inspection Date: 2026-02-13; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200
; Gross weight [kg]: 2175; Inspection Date: 2026-02-13; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200
Loading aid AHLBORN, type: Liftmatic for double width - Up and down movement automatically - 6 seconds from bottom to top - Manual loading - Condition: Very good - Speed: 15 cm/sec
Model: Liftomat for the transfer of dough divider into a RuLa movable on a frame Output approx.: 900 pcs/hour Connection 400V, 0.5 kW, 16A-CEE plug Used machine overhauled 6 months warranty With us you will find a large selection of bakery equipment!
Hello, We hereby offer you a used articulated telescopic work platform on wheels (telescopic aerial platform) from the manufacturer TEREX AERIALS, type TA30N Boom Lift. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: TEREX AERIALS Type TA30N Boom Lift Built in 1999 Operating hours 887 hours Transport dimensions retracted 4.20 x 1.22 x 2.12 m (L x W x H) Curb weight 4800 kg Max. height of the floor of the working cage 9.14 m Max. working height 11.14 m Max. working width 5.20 m Outer turning circle 3.50 m Max. climbing ability 20 % Max. travel speed, boom retracted 4 Km/h Max. travel speed, boom extended 0.75 Km/h Safe load capacity (2 persons) 225 kg Max. noise level 70 dbs at 3m Operating Temperature Range -5°C to 40 ...
; Gross weight [kg]: 2450; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 2300; Maximum lift capacity [kg]: 200
; Gross weight [kg]: 1900; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 1400; Maximum lift capacity [kg]: 200
; Gross weight [kg]: 3300; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 2300; Maximum lift capacity [kg]: 200
Licon LiFLEX II i³ 766 DT B22 Precise mechanical machine Operating hours: approx. 40,148 h power: 150 KW The LiFLEX II i³ 766 sets new standards with its groundbreaking i³ technology, which combines two spindles in one machine. With double spindles and maximum accuracy, it enables a stable and precise machining process like never before. Thanks to independently adjustable motor spindles in the Z axes and a 5-axis configuration, this machine offers maximum performance in every operation. The generous spindle distance of 750mm and the generous working area of X 750 Y 660 Z 650 enable the machining of a wide range of workpieces with ease. Temperature sensors with innovative algorithms reduce the influence of different temperatures on the positioning accuracy of the motor spindles, while the Watt Pilot ensures reliable drill breakage control. The LiFLEX II i³ 766 is not onl ...
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside mm -Stroke: 290 mm -Total length: retracted 607 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 607/145/220 mm -Weight: 37 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL, Hydraulic cylinder, tilting cylinder, stroke 1590 mm -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Dimensions: 1895/90/110 mm -Weight: 19.5 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 50 to 100 mm -Load capacity: 6000 kg -Quantity: 1 piece available -Price: per piece -Weight: 29 kg/piece
brake drum -Bore: conical Ø 27 to 32 mm with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 4 drums available Price: per piece -Weight: 6.5 kg/piece
Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg
Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg
Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg
Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg
Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece
Size: 800 x 600 mm Equipments: Max. Load capacity: 1000 kg Max. Dimension: 800 x 600 mm
Toyota BT Quick Lift pallet truck 2300kg 1150 mm RA2231 Manufacturer: Toyota Fork length: 1150 mm Fork width: 156 mm Carrying surface width: 520 mm Maximum load capacity: 2300 kg Lifting range: 85 - 200 mm With quick lift, 2x pumping is sufficient to be off the ground, with a maximum load of 150 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
ProLift Pallet Stacker Device has hardly been used and is almost as good as new. - Year of construction: 2019 - Voltage: 230V 50 Hz - Power: 0.8 kW Installation instructions and material are enclosed in full. Shipping on pallet with forwarding agent possible throughout Europe. More machines available! Feel free to take a look at our advertisements. If you have any questions, just write or call: 0160 966 798 44 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg
Offer 25221 Specifications: - Load capacity 2000 kg - Projection approx. 3000 mm - Swivel radius approx. 180 ° - 2 lifting speeds approx. 3.0 + 0.75 m/min - Hackenweg approx. 3000 mm - Operation of the chain hoist via hand remote switch - Manual swivelling of the boom + trolley movement - Boom IPE 300 - Overall height with swivel arm carrier approx. 1220 mm - Connection 400 V - Weight approx. 500 kg - Test book
A vertical Hänel compact paternoster is available. Number of containers: 67, max. container load: 250kg, max. container dimensions X/Y: 1300mm/825mm, height increment: 75mm, max. total load: 20000kg. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
