lif used for sale

Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co.Year of construction approx. 1980Load capacity approx. 5 ton. Platform size 1700 x 1100 mmStroke max. 515 mmOverall height Table bottom with rail rollers 535 mmOverall height Table bottom without rail rollers 480 mmTable height raised with rail rollers max. 1050 mmTable height raised without rail rollers max. 995 mmTravel speed rail chassis approx. 8.5 meters/min. Motor power 4 kWNet connection 400 volts, 50 Hz hand switch for up and down on the cable safety limit switch

Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and

Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with

E-chain hoist, electric hoist, crane GIS type EM 25Fabr. No: 24468 Year of construction 1998Lifting capacity: 250 kgHook travel: 3.4 metersMain lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min.1 load string = 250 kgCable length Control bottle: approx. 1.7 metresPower supply: 400 volts, 50 Hz- suspension eye on the top of the crane - without chassisWeight: 24 kggood condition; used

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -

Lift table HANDY type 1250E Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG

Lift table HANDY type 1250E - No 2 Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG

Vaccum Lifting Device COVAL VAC 12 FH Year of construction: 2012 Maxi loading capacity: 80 KG Suction cups diameter: Ø 150 mm Maxi spacing: 910 mm Mini spacing: 350 mm In very good condition Voltage: 380 V Dimensions (L x W x H): 1100 mm Depth: 900 mm Total height on frame: 1000 mm Total weight with support: 100 KG

Working height: 8100mm, platform height: 6100mm, load capacity: 360kg, platform dimensions X/Y: 2300mm/760mm, transport length: 2300mm, weight: approx. 1970kg, operating hours: approx. 556h. An on-site inspection is possible.

K-TECHNIK lifting beam was built by K-TECHNIK s.r.o. in the Czech Republic in 2024. The device is used for the safe lifting and transport of diverse loads weighing up to 4 tonnes. The combination of robust design with four hooks with fixed spacing makes it the perfect solution for cyclical work. The K-TECHNIK H lifting beam weighs 547 kg. Technical specifications of the K-TECHNIK lifting frame - maximum lifting capacity: 4000 kg - maximum lifting area (L x W): 4200 x 2750 mm - number of load hooks: 4 - device dimensions (L x W x H): 4860 x 2832 x 457 mm - K-TECHNIK device weight: 547 kg

Lifting kneader KEMPER, type: F 75 ASL -overhauled- - for 75 kg flour or 120kg dough - incl. 2 tank cars - Incl. dust cover - Condition: technically very good, ready for immediate use -Refurbished - 6 months warranty Visits and test runs are possible by arrangement.

Manufacturer: Genie Model: GS384 RT Year of Manufacture: 2008 Operating hours: 395 h Working height: 12.06 m Measurements (LxWxH): 389 x 213 x 268 cm - Height with handrails lowered: 200 cm Weight: 6806 kg Condition: Fully working, continuously serviced Find more here - / Contact us at -

DIOSNA Lifting Kneader, Type: S 200 2G -Refurbished with 6 Months Warranty- - for 125 kg flour or 200 kg dough - 2 speeds - Arm and boiler made of stainless steel - Condition: Very good, overhauled, ready for immediate use - incl. 6 months warranty Visits and test runs are possible by arrangement.

weight max. in kg: 1000 kg table width: 800 mm stroke height: 190-1010 mm table length: 1300 mm stroke of worktool slide: 40 mm/sek. weight: 220 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used DIOSNA Lifting Kneader, Type: S 35 2G -In Bakery Condition- - for 35 kg dough or 20 kg flour - 2 speeds - Foot switch to turn on -Protective - Machine runs very smoothly - Technically tested and cleaned - Machine repainted - Kneading arm and kettle made of stainless steel Inspection and test run are of course possible by arrangement.

weight max. in kg: 2000 kg table length: 1300 mm stroke height: 190-1010 mm table width: 800 mm stroke of worktool slide: 22 mm/sek. weight: 280 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used DIOSNA Lifting Kneader, Type: S 20 3G -In Bakery Condition- - for 20 kg dough - 3 courses - Rewired - Engine Newly Mounted - New V-belt - Machine repainted - Kneading arm and kettle in stainless steel - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the cente ...

Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.

Truck attachment Drum grab Suitable for 2 x 200 L steel corrugated/steel lid drums Description firm grip even on uneven floors Sturdy, welded steel construction Forklift attachment module with robust powder coating in blue (RAL 5010) Fast, easy installation on the forklift Automatic fixation when lifting the drum Automatic release of the clamp when setting down Safe pick-up of steel corrugated and clamping ring drums Height adjustable Specifications Surface: Hot-dip galvanized Application: Lifting/transporting steel drums Width outside [mm] 1050 Depth outside [mm] 1080 Exterior height [mm] 975 Fork pocket spacing [mm] 730 Fork Bags W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate Description 1 2006/42 DECLARATION of CONFORMITY Weight [kg] 110 More items - new and used - can be found in our shop! International shipping ...

Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.

Offer 20223 Specifications: - Operation via handheld remote control with cable - Load capacity 1000 kg - Platform size 1250 x 800 mm -Min. Lift table height 280 mm -Max. Lift table height 950 mm - Stroke 670 mm - Hydr. drive 400 V / 1.1 kW - Space requirement approx. W 1300 x D 900 x H min. 280 mm - Weight approx. 150 kg - Mobile undercarriage

2 pcs. Lifting beams Load capacity 57.5 t each. Total length each 6000 mm with 4 shackles each

Lifting kneader Diosna S 35 Dough machine with sophisticated technology! with stainless steel kettle and kneading arm for max. 35 kg dough 2 gears with timer Machine mobile small space requirement! Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Machine platform E-Box for more safety Service Packages Maintenance contract Ask about our delivery service! Instruction & Commissioning

Lifting kneader Diosna S 35 Dough machine with sophisticated technology! with stainless steel kettle and kneading arm 2 courses Machine mobile small space requirement! Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Machine platform E-Box for more safety Service Packages Maintenance contract Ask about our delivery service! Instruction & Commissioning

Cup filler, make Schutten, year of manufacture 2005 with lifting and tilting device, - 2-lane rotary conveyor with matching lifting and tilting device for standard trolley 200 l, - Suitable for filling chunky masses (e.g. delicatessen salads), pasty products (e.g. mayonnaise, spreads), - Stations: unstacking cups, filling, sealing, ejecting, - Sealing foil from roll, sealing tool with integrated cutter, - Format set for butchers cups (112 x 86 cm), - Filling capacity: 15 – 35 cycles per minute (corresponds to 30 – 70 cups), power: approx. 19 bars / min (= 38 cups)

Packing system loaded onto trucks Timber length 3-5m (5.5m) Composed of: Tilting table Alignment roller conveyor Board Splitter Layer conveyors Handovers (5 pieces) Lift table Transport... (Without control cabinet)

• Permissible load 200 kg • Lifting mast with floor bearing • Overall height 3,050 mm • Lifting height centre of mandrel to floor approx. 2.50 m • Load reversing gear with mandrel holder • Mandrel holder diam. 35 mm, L 460 mm, centre distance 600 mm • Lifting column manually swivelling • Drive 24/400V/50Hz

Toyota LSV 1600

Type : R60 - 50 Capaciteit: 3500 kg zijverschuiving

BATTERIJ : 20 kW - 80 V Capaciteit: 3500 kg bouwjaar: 2015 Zijverschuiving automatische vorken

V:\Mecamold\Lift transporters

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake

NEW, 240 cm width, 1.01 m³ capacity, SUN version - with welded-in Hardox scraper bar 150 x 16 mm, 351 kg dead weight

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Genie/Terex mount

NEW, width 220 cm, 266 kg dead weight, 0.75 m³ capacity, with JCB Q fit mount

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

NEW

NEW, width 200 cm, 250 kg dead weight, 0.70 m³ capacity, with Merlo attachment

NEW, 120 cm long tines, 2 t load capacity, with Terex attachment (81 cm attachment width, 433 mm attachment height, top 35 mm, bottom 35 mm)

NEW, 240 cm width, 1.01 m³ capacity, with Manitou attachment, 351 kg dead weight, with 11 teeth

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

NEW, Width: 240 cm, Capacity: 0.82 m³, Weight: 284 kg, with Manitou mount

NEW, 250 cm width, 1.05 m³ capacity, with Kramer / Claas Scorpion mount, 364 kg net weight

BIG hook lift container with 5000 l tank