129,091 used machines on RESALE, but how to find them? Machine Search
A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.
Stock number: D1209, Mobile column lift, stainless steel,, KÅ-GE-LYFTEN type SKV200 MIPKHRT., With chain drive,, emptying height 2000 mm., W 1500 x D 1100 x H 2800 mm., Material: Stainless steel AISI 304, Dimensions: W 1500 x D 1100 x H 2800 mm.
Stock number: D1211, Column lift, stainless steel,, stationary with spindle., Danfotech type SH300,, 1,5 kW., 3 x 220 Volt,, max 300 kg., Variable emptying height 2000 - 2700 mm,, W 1200 x D 500 x H 3400 mm., Material: Stainless steel AISI 304, Dimensions: W 1200 x D 500 x H 3400 mm.
Equipped with weighing device and turntable Auction-ID: A1-41277-44
Stock number: D973, Vacuum lifter,, Vaculex 140., 4 pc. Ø 150 sucker., Mounted on beam,, for mounting in ceiling., 0,12 kW motor, 220 V.
Stock number: D913, Column lift, stainless steel,, Scanio type K7, for floor mounting., Fork-lift with bin fork for, lifting and tipping of Vemag bins., Max. tipping height 1900 mm., Material: Stainless steel AISI 304
Stock number: D830, Hydraulic lifter,, Silverson model E., Manually controlled., Stroke 1000 mm.
16 tons Auction-ID: A3-43539-11008
Stock number: D1088, Column lift, painted edition., 1,1 kW motor, 220/380 Volt,, spindle type., Lifting fork with slot grip,, for lifting and emptying of Vemag wagons., Total height 2850 mm.,, estimated tipping height 1900 mm., Material: Painted edition
Stapellift / Stack Lift Polar SFA-3 Baujahr / Year 2001 - Serial-No. 7177002 Tragfähigkeit / Carrying apacity max. 1000kg Lichtschranke / Light barrier Sehr guter Zustand / Very good condition
Auction-ID: A3-43538-11807
Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2P Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C
Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle
Auction-ID: A1-47009-32
Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight
Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co.Year of construction approx. 1980Load capacity approx. 5 ton. Platform size 1700 x 1100 mmStroke max. 515 mmOverall height Table bottom with rail rollers 535 mmOverall height Table bottom without rail rollers 480 mmTable height raised with rail rollers max. 1050 mmTable height raised without rail rollers max. 995 mmTravel speed rail chassis approx. 8.5 meters/min. Motor power 4 kWNet connection 400 volts, 50 Hz hand switch for up and down on the cable safety limit switch
Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and
Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with
Auction-ID: A1-40262-178
E-chain hoist, electric hoist, crane GIS type EM 25Fabr. No: 24468 Year of construction 1998Lifting capacity: 250 kgHook travel: 3.4 metersMain lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min.1 load string = 250 kgCable length Control bottle: approx. 1.7 metresPower supply: 400 volts, 50 Hz- suspension eye on the top of the crane - without chassisWeight: 24 kggood condition; used
Auction-ID: A1-40262-171
With Rotator Auction-ID: A1-40262-179
maximum number of results exceeded
please refine your search
10 € 
