les used for sale

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

TREFOLATRICI MONOARCO 3000 GIRI "O.M. LESMO", MODEL DTO 630, MATR. 737878/1, 737878/2, BOB COLLECTION : 630 COMPLETE OF PEPMESS "ANDANTEX" TYPE SATORFORSFOR1/8 BOBINE CONIFLIP REREFERES AND LINK WITH BANCAL OF ACUNCUNMENT FOR 48 BOBINEs

General SKU416W1314 LocationBarneveld CEcheck MakeLessine Main Features Motor7.5 KW Inlet diameter100 mm Width100 mm Specified Features - Pin Mill MaterialStainless steel 1.4306 (304L) Pin Mills Pin disc millcheck Rotor size270 mm Grinding room size320 mm Number of pins on house side:45 Number of pins on door side:100 Pin diameter12 Housing dimensions Dia. 400 mm InletDia. 100 mm Motor7,5 kW (400 V, 1470 rpm) Speed3000 rpm Information TypeEL 100 No.21-1132 Year of construction2021 Mounted on framecheck Floor space0,70x1,30 m Total height0,70 m Weight500 kgPin MillsLessineMills > Pin MillsBrand > Lessine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

round brush -Outer diameter: Ø 200 mm -Reach: 20 mm -Width: approx. 30 mm -Price: per piece -Quantity: 5 available -Minimum order quantity: complete -Weight: 1 kg/piece

Serial No.:553775/1 Length 1,890 mm

Serial No.:553776/1, length 490 mm

Serial No.:553779/2, length 1,190 mm

Serial No.:553776/1, length 490 mm Auction-ID: A1-46666-529

Serial No.:553779/2, length 1,190 mm Auction-ID: A1-46666-527

Serial No.:553779/1, length 1,190 mm Auction-ID: A1-46666-526

Serial No.:553775/1 Length 1,890 mm Auction-ID: A1-46666-524

Serial No.:553775/2, length 1,890 mm Auction-ID: A1-46666-525

Serial No.:553773/1, length 490 mm Auction-ID: A1-46666-528

Kiln 1200C inner dimensions 1x1x2m 2 heating zones auto door Fours pour la fonderie Fours pour la forge et le matriçage Fours pour les traitements thermiques Equipements périphériques Fours pour verres feuilletés Fours Basse température Fours à passage continu Fours céramique Fours à creuset pour fusion et fusion-maintien des métaux non ferreux Creusets pour fonderie Fours pour cuisson et décirage de carapaces de fonderie à cire perdue Fours de forge standard Fours à creuset Fours Haute température Fours de laboratoire Fours de trempe Fours de recuit chauffé à l'électricité chauffé au gaz four standard chauffés à l'électricité four standard chauffés au gaz Fours à longerons mobiles Fours de thermoformage Fours de séchage Fours de polymérisation Fours pour le verre Fours Fours à sole tournante de bombage Fours de revenu  ...

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm.

Ref. no.: 18255 Manufacturer: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ Advanta ...

Ref. no.: 18657 Manufacturer: ENGEL Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision ENGEL e-victory 440/160: This is a hybrid machine (servo-hydraulic + electric) How it works Electric part: Injection unit (screw movement) Ensures very high precision and process stability Hydraulic part: Clamping unit (mould closing) Maintains clamping force efficiently without continuous energy consumption This system combines: The precision of an all-electric machine With the power and efficienc ...

Manufacturer:Wille Geotechnik Type of Machine : Soil Triaxial test system Year of Manufacture: 2023 Warranty: Valid until June 2026 Load Frame - Model: Universal table-top load frame UL-50 - Maximum force: 50 kN - Spindle stroke: 100 mm - Feed rate stepless: less than 0.00001 to 60 mm/min - Integrated analogue ports: 6 - Test space height: 1000 mm - Test space width: 360 mm - Dimensions W x D x H: approx. 550 x 556 x 1728 mm - Weight: approx. 130 kg - PC interface: Fast Ethernet RJ45 - Supply voltage: 115/230 V, 50/60 Hz - Controller: Siemens industrial controller Triaxial Cell - Model: Triaxial cell with external rods, specimen diameter up to 100 mm, 2 MPa - Max. confining pressure: 2000 kPa - Max. axial load: 50 kN - Max. sample size: 100 x 200 mm diameter - Approx. dimensions: 420 x 650 mm diameter - Weight: 18 kg - Transparent polymer cylinder reinforced with carbon fibre stri ...

1992 Masterwood MW21.31KS CNC drilling-milling machine Electric throttle (throttle n° ) Electric throttle - 11 fuggoleges + 6 horizontal - 11 ftie:e:oleges + 6 horizontal + furrow - 24.000 rpm 2.04. Noise level The noise level of the cheetah: MW 12.25 KS/ MW 15.38 KS/ MW 18.38 KS/ MW 21.31 KS/ MW 21.42 KS In accordance with 1SO7690 - EN848.3 Furas: - level of acoustic noise Leą at the operator´s load - the maximum power of the instantaneous acoustic footprint is less than - the acoustic difference under the LWA load is below Ćitvalastas: 19,5 dB (A) 130 dB (C) 99,2 dB (A) - level of acoustic noise Leą at the operator´s load: 82,5 dB (A) - the maximum power of the instantaneous acoustical noise is less than 130 dB (C) - the acoustic difference under LWA load is less than 103,4 dB (A) The tests were carried out with a Bruel & Kjaer 223 I precision integral sound  ...

Manufacturer: Canon Model: C10000VP Combined total of all pages printed (color + B&W) : 15516806 General Specifications Warm-up Time Less than 420 seconds from power-on. Interface Type - USB 2.0 Hi-Speed - Ethernet: 1000Base-T / 100Base-TX / 10Base-T - Standard: 2 USB host ports Network Protocols No print function Processor Speed 1.66 GHz (SOC ARM 1136JF-S 400 MHz, ARM 946 200 MHz) Memory 1.5 + 2.0 GB Hard Disk Drive Standard 250 GB hard drive Control Panel (EFI/Canon PS/PCL) Tilted Control Panel F1: 10.4-inch (26.4 cm) SVGA color TFT touch screen with LED backlight Control Panel (PRISMAsync) A4 Control Panel: 15-inch touch screen Dimensions (W x D x H) 2586 mm x 1152 mm x 1456 mm Installation Dimensions (W x D) 2586 mm (W) x 1971 mm (D) Weight Approx. 1200 kg Operating Environment - Temperature: 20 to 27 °C (68 to 80.6 °F) - Humidity: 15% to 60% relative hum ...

Still working with outdated formwork systems? Time to change that. The used Dokadek 30 panel formwork brings structure to your site and focuses on what matters: quick setup , clear workflows , and safe handling .   Looking for a reliable formwork system for straightforward slab projects ? This is your chance: Buy Dokadek used †functional, robust, and ready to ship. Less lifting 🧱 , less searching 🔍 , less risk ⚠ †more focus on what really counts: moving forward. 🚀   ✅ Why Dokadek 30 (used) is worth it: ✔ Fast setup without beams ✔ Simple, intuitive system layout ✔ Minimal material variety †maximum efficiency ✔ Assembly directly from ground level ✔ Ideal if you’re looking to buy used slab formwork   ⏳ Still thinking? Others have already placed their o ...

Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - / Contact us at -

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled. Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc. Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service. Main features: Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability
Easy, tool-less change over: index change and size-related parameters automatically selecte ...

Furnacce 1200 hardness tester 300x300x500 mm Temperature max 1200C Ölbrenneranlagen Retortenöfen Teil Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen Tunnelofen Haubenofen Schachtofen Sonderanlagen Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmaschinen Drehherdöfen Doppelkammeröfen buerstlein Draht Glühöfen Durchlauföfen zirlguss Elevatoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herd ...

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

Euro supports eco 350 - new Steel prop, galvanized • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight, 17.60kg • Reliable to use due to consistently high load capacity of at least 20kN according to EN 1065 • Easy height adjustment through hole numbering Europrop eco 350, new construction prop made of steel, galvanized - effortless loosening of the adjusting nut due to special thread geometry - less effort required due to low weight, 17.60kg - safe to use thanks to consistently high load-bearing capacity of at least 20kNto EN 1065 - - easy height adjustment thanks to hole numbering

The Table Top Print bag packer enables the efficient packaging and sealing of products into pre-made bags and is suitable for various formats. The machine is easy to operate and has a user-friendly display that can be used to set up, save jobs and control operating parameters. For more flexibility, it offers automatic and manual operating modes with a secure sealing rail. The briefing of a packaging employee takes less than five minutes. With integrated thermal transfer printing technology, pouches can be printed directly with high-resolution graphics, text and barcodes, eliminating the need for separate labeling. Features - Multi-color screen for easy adjustment - Number of products to be packed can be set in advance - Integrated total counter of the products (incl. reset option) - Roll change in less than a minute - Welding by foot signal, automatically or by hand pres ...

GENERAL Project No.: 905670 Quantity: 1 pcs. Manufacturer: TACCHELLA Type: Elektra 1018 MPC Control: MPC Year of Make: 1999 Condition: Used machine Layers approx.: less than 1 layer DESCRIPTION CYLINDRICAL GRINDING Max. grinding diameter 350 mm Max. grinding length 1000 mm Center height 180 mm Center width 1000 mm GRINDING SPINDLE UNIT Travel in X/Z 350/1180 mm Max. rapid traverse speed in X/Z 10/10 m/min Grinding headstock can be swivelled manually Belt-driven grinding spindle for external grinding wheel right with max. diameter x width x bore 400x50x127 mm left with max. diameter x width x bore 450x80x203 mm Max. circumferential speed 35 m/s2 Max. power at ED 10-40/100% 7.5 kW Mounting MK5/ASA4 TAILSTOCK Tailstock can be moved manually Tailstock quill holder MK4 Cylinder Fine Adjustment Tailstock Manual Dresser with dressing tile on tailstoc ...

Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm ) Width of saw pulley face-optional 5 1/2" (140mm ) Maximum width of saw-standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9,1" ( 2770mm ) Overall width 8,1" ( 2460mm ) Speed of saw pulleys,r.p.m. 8,000( 2440m/min ) Horse-power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42,6m) Shipping Specification : Standard Machine : Nett weight, lbs. 3583 Kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide f ...

Newtec CELOX optical sorting line, Machine has been upgraded to the newer type CELOX in 2016, The order is based on the following specifications, Ambient temperature ± 5 – 25 ºC., Product Clean, washed carrots, Capacity: 8 to 10 tons per hour, depending on the batch, (quality and sorting), Product foreign materials The Celox cannot detect foreign materials such as glass,, wood, stones etc., Functionality:, Length: +/- 3mm (less than 1% errors), Diameter: +/- 1mm (less than 1% errors), broken: 60-65% is removed (on normal broken carrots) there will be 5-6% good, carrots among the errors, C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors, Volume: +/- 5%, -Incl. conversion of complete camera unit to new version, -9 Cameras with 8 megapixel resolution (current 2 magapixel), Cameras look at the carrots from above and below at an angle, -Better detection of roo ...

Modular high-throughput pressure device with environmental control (single cell only) with 4 liquid channels scalable to 8 liquid channels for dispensing reagents Ability to dispense from 10 pl to 800 pl in a single drop, depending on the piezo dispensing capillary (consumable) used. The instrument provides consistent and highly reproducible reagent delivery with a mechanical precision of gantry motion of less than 3 μm and a spot positioning accuracy of typically less than 6 μm.

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

The revolution in instrument reprocessing Careclave can be installed quickly and easily in any reprocessing room. Four process steps in one device, convincing advantages for your practice! Why use 4 products for the reprocessing of the instruments when you can have everything in one device? With Careclave, you save significantly more time, money and space in your dental practice from day one compared to conventional device combinations: 6,000.00 € less service costs: Because fewer devices cause less costs. Careclave is not only cheaper to buy, but also saves you extra maintenance and validation for additional devices. 45% more space in the reprocessing room: Your practice team knows that work space in the reprocessing room is precious. With Careclave, you have significantly more space for the safe reprocessing of your instruments! You can do without an additional care device ...

Key data: 1000 kN

Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started b ...

Key data: 400 kN

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Dimensions: Weight: 6500 kg Length/Width/Height: 1.9 ...

Pisto CP3 almond roaster / nut caramelizer, incl. cooler, built in 2025, for batch production and coating of roasted almonds, caramelized nuts, and similar confectionery products., The system consists of three rotating copper kettles, each heated by a gas burner. The integrated stirring blades ensure nuts, sugar, caramel, sesame or other ingredients are evenly mixed and processed. The copper kettles are tiltable, allowing the finished product to be discharged easily and in a product-friendly manner., The machine is built in a stable stainless steel construction and has been retrofitted with wheels. It is prepared for operation with mobile gas cylinders and is thus particularly suitable for flexible production areas, manufacturers, confectionery producers, nut processors, event/entertainment companies, or test and small-batch production., Additionally belongs a Cooler type CB10 with 10 pl ...

The NeoDen ND2 is an advanced SMT automatic screen printer designed for easy operation, high precision, and high stability PCB solder paste printing.With a repeat position accuracy of +/- 10.0 micron at 6 sigma and Cpk of 2.0 or greater, the ND2 delivers superior precision over its predecessor the ND1. Manufacturer: NeoDen Model: ND2 Fully Automatic Visual Printer Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.4 mm to 6 mm - Maximum PCB weight: 3 kg - Transmission speed: 1500 mm/s maximum - Transfer height from ground: 900 +/- 40 mm - Transfer direction: left-right, right-left, left-left, right-right - Template frame size: 470x370 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: floating intelligent printing head with two independent direct co ...

Manufacturer: KOKI TEC Model: SELBO III 350 Type: Inline selective soldering machine Specifications - Outer dimensions: 2,750 (L) x 1,430 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 350 (W) x 400 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 14 kVA (heater) / 6 kVA (solder pot) - Net weight: 420 kg (fluxer) / 370 kg (heater) / 450 kg (solder pot) Find more here - / Contact us at -

Manufacturer: KOKI TEC Model: SELBO III 5051 Type: Inline selective soldering machine Specifications - Outer dimensions: 3,236 (L) x 1,577 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 500 (W) x 510 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 20 kVA (heater) / 6 kVA (solder pot) - Net weight: 450 kg (fluxer) / 390 kg (heater) / 480 kg (solder pot) Key Features - Improved soldering quality with reduced solder defect rate - Inline automation for labor savings in PCB assembly - Modul ...

Excellent condition - Fully operational - Loading / Transport possible! Industrial printer for a wide range of applications Head: On-demand Piezo head (Array of 2 heads stagger) Print resolution: 300, 450, 600, 900, 1,200dpi InkType: CMYK ink + white + varnish 8 one liter ink cartridges (cmyk+2 varnish+2 white) UV curable ink : LUS-120 (C, M, Y, K, W, Cl) UV curable ink : LUS-150 (C, M, Y, K, Lc, Lm, W) UV curable ink : LUS-200 (C, M, Y, K, W) UV curable ink : LUS-350 (C, M, Y, K, W, Cl) UV curable ink : LH-100 (C, M, Y, K, W, Cl) Ink Supply system: Supplied from 1-liter bottles for each color Maximum diagram dimensions 2500 × 1300 mm Media Dimensions 2500 × 1300 mm Height Max. 50 mm print on rigid surfaces/materials up to 50 mm thick 2 print heads Weight Less than 50 kg/m2, non concentrated load Media absorption, Absorption fixed through use of a vacuum Number of abs ...

Year of manufacture: 2007 Type: Bar loading magazine Easy changeover of the guide channel in less than approx. 2 minutes. Complete changeover of the guide elements possible in less than approx. 8 minutes. Technical details: Diameter range: 2 mm to 20 mm Channel Ø 22 mm Maximum bar length: 3,000 mm Installation dimensions / dimensions (L x W x H): 3,970 x 480 x 1,250 mm Weight: approx. 850 kg Condition: fully functional The machine can be viewed in operation by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale! Translated with DeepL.com (free version)