leit used for sale

Dampfkessel Baujahr: 1986 Neuer Kessel Baujahr 1991 Hersteller: Loos Typ UL SH 14000 Kesselleitung: 8.5 to Dampf/h 6`000kW Betriebsdruck: 16 bar Dichtekontrolle 70 mbar Gas min. 85 mbar Gas max. 170 mbar Neue Steuerung Baujahr 2002 Neue Steuerung Simatic WinCC V5.1 Steuerung HME = Steuerung Alfa / Speisewasser von Enthärtungsanlage Christ (Niveau 11.01 < min Alfa aktiviert Pumpe 11.7 und Ventil 11.71) Steam boiler Year of construction: 1986 New boiler Year of construction: 1991 Manufacturer: Loos Type UL SH 14000 Boiler capacity: 8.5 to steam/h 6`000kW Operating pressure: 16 bar Density control 70 mbar Gas min. 85 mbar Gas max. 170 mbar New control system year of construction 2002 New control Simatic WinCC V5.1 Control HME = control Alfa / feed water from Christ softener (level 11.01 < min Alfa activated) Pump 11.7 and valve 11.71) Die fast neue Wasseraufbereitungs ...

This Hexagon (LEITZ) PMM-C 1000 Measuring machine was manufactured in the year 2006 in Germany. It is equipped with a B4 control unit. The machine has a Length measurement error of 1,6 μm + L / 400.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

Working width: 2600 mm Roller width: 2800 mm Number of rollers: 2 Stück Supporting roller - dia: 295 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 240 mm Roller covering - synthetic PU: 83 Grad shore Pressure line: 50 N / mm Pressure total: 14 to Cloth guiding system for woven fabrics: Breithalter, Leitwalze Drive side: nach Auftrag Operting side: nach Auftrag Drive shaft: dia 80 mm Hydraulic unit for separately pressure: in inox Compensator: mit pneum. Entlastung • 2-Bowl high efficiency squeezer with one Swimming Roll (S-roll), • Machine had been completely refurbished in 2007, • with drive (with GS-Motor and gear, without control) for V = 60 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winkelanlage Weinig including tools Type: UC 10/6 Year of construction: 1994 Cross wood processing 7 x stroke (7 tools on top of each other at IV 68) Longitudinal machining 3 shafts: 2 pieces with 3 x stroke and 1 piece with 2 x stroke Screen control for individual programs such as individual and series production Swivel stop arm for inclined window processing Tool: IV 68 Leitz (Dufix) with extension kit for sash 78 mm / frame IV 68# IV 68 with rung profile (carnish arch on the glass fold) IV 78 Zuani (for weather legs and rain rail) with extension kit for IV 90 (Zuani) with extension set for wood-aluminium windows (Aluminum shell as glass holder outside of Zuani) Weight 4700 kg

2-fold internal thread series drilling machine make WMW type MFIV 4Built in 1988Performance: M 4max thread cutting length through holes / blind holes: 18/24 mmMain spindle stroke: 32 mmmechanical main spindle feeds or thread pitches: 0.25-0.3-0.35-0.4-0,45-0,5-0,6:-0,7-0,8-1 mm / revSpindle speeds rpm: 500-710-1000-1400-2000-2800Drive power per machine: 0.25 kWWith- Leitpatronen- Change wheelsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tapping machine make FLOTT type TBZ 15 GLFabr. -No: 3217748, built in 1990Technical specifications:Drilling capacity: 5 - 25 mmSpindle: MK 2Thread cutting: M 16Drilling depth: 80 mmProjection: 200 mmColumn diameter: 70 mmStroke: 80 mmTable surface (usable): 200 x 280 mmDistance spindle - table: 160 - 500 mmFeed drilling: by handFeed Thread cutting: with lead screw22 spindle speeds: 80 - 6300 rpm.Motor power: 0.55 / 0.75 kWWeight approx: 225 kgWith- Base cabinet- Lead screw (Leitpatrone)- Cooling device- Setting single clock / continuous cycleused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dosing conveyor belt Belt width 500 mm Wheelbase 2500mm Drum diameter 220mm Drive drive drive north 1.1 kW, 0.12 m/s Spindle clamping device Strap EP250 3 3+2 galvanized version Leitgosse Intrusion protection Ripcord switch

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

Control system MEGA 120 & NESTING GROUPS SCM Group Joining unit with Dia-Leitz tools Glue basin station with quick-change pool Cross-cut unit with swivel function up to 15° Soft and postforming plates can also be known. Flush milling unit with radius milling Solid wood edges 6 x 60 mm Spraying device in front of joining unit Corner rounding unit Edge Brick Blade Unit Surface drawing blade unit Spraying device in front of babble unit Swabing unit Feed speed 10 m/min Machine length 4450 m

Set of coolant accessories Britsch Includes, among others. KUE102529 Kühl Flex HEB Winktelstekcer mit CU Rohr 180mm KUE101991LEIT Kühl Flex HEB MiniPlug Leitungsset gerade 300mm (3x) KUE102247 Kühl Flex HEB MiniPlug Leitungsset wangled 100mm and much more.

Window processing line, CNC window production system, window angle system -Double end tenoner, make: Gubisch, type: DST H -Year of construction: 1994, serial no.: 7593 -2x 2 tool towers with 5 heads each -built tools from: Leitz -Shaft mount: Ø 50 mm -Max. Tool: Ø 350 mm -Max. Tool height: 650 mm -4x milling motors 11 kW 2800 rpm -Control, make: Gubisch -Roller conveyor, L/W: 4,000 x 200 mm -Milling machine, make: Gubisch, type: FN2000 -Year of construction: 1994, Ser.-No.: 7490 -4 milling shafts -4x milling motors 9.2 kW 2800 rpm -Tools from: Leitz -Shaft support: approx. Ø 40 mm -Max. Tool: Ø 230 mm -Max. Tool height: 350 mm -m. Feed roller conveyor, L/W: 4,500 x 150 mm -Discharge roller conveyor, L / W: 4,000 x 200 mm -Tool cabinet -Switch/fuse box

Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant str ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustme ...

Good day! I would like to offer you the following machine: 1 used dresser SCM F 410 - 41 cm planing width - 2.60 m table length - 125 mm knife shaft with 4 knife Centrofix - 4 KW 380 volt motor -Main switch -Circuit breaker - Automatic engine brake - 8 mm chip removal - Joining stop can be swivelled up to 45° - Auxiliary stop - Low-noise design with serrated steel table lips - Suction nozzle 140 mm - Star triangle switch renewed (150,-- € + 19 % VAT) - 4 Leitz-Centrofix knives newly installed (80,-- € + 19 % VAT) - Weight: 750 KG - Price: €4,300,-- + 19% VAT The machine is technically checked, cleaned and adjusted. Cables and plugs available and ready to use. Very good condition. Bank transfer before shipment or cash payment on pick-up. Loading by forklift is not a problem. The machine is sold without any warranty or gu ...

Key data: 3 KW, 4 kVA, 10000 V

Technical data engine: Engine manufacturer: Leitner Engine Type: LTE16V4900 Engine power: 3,280 KW Cooling: Water-cooled Tempering: Electric 24 V DC / 2 x 11 KW Speed: 1500 rpm Fuel: Heating oil EN 590 Technical Data Generator: Generator manufacturer: Mecc Alte Generator Type: ECO47HV-1L/4 Generator power: 3900 kVA Voltage: 10 kV Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation / ÜSY Delivery: Built-in Tank: on-site, external Dimensions of the aggregate: Width approx. mm: 2,438 Height approx. mm: 2,700 + silencer Length approx. mm: 12.192 Weight approx. KG: 34,000 Stock number: 1412 Condition: New Year of construction: 2024 Shipping time: 24 KW from AB Hours: New Location: Verl - Germany Scope of delive ...

Number of machnines: 15 Stk Loading meters, approx.: - m Total weight, approx.: - kg Company closure for wooden window construction -------------------------------------- Machines will be available from August/September 2024. Pos. 1: Weinig, PFA 17N, built in 1967 Four-sided planer, 6 spindles, chain drive, with glazing bead separation, with planing heads Continuous feed, working width 170 mm, working height 120 mm Electric height adjustment feed beam Pos. 2: MAPO Spu 180, built in 1992, finishing machine, mobile Pos. 3: Gubisch CW 2, built in 1998, angle system with return, with Leitz IV 68 wood, wood-aluminum, Gold IV 78 wood 1 slot spindle, 3 profile spindles Pos. 4: Götzinger OBM, built in 1998 corner bearing and olive drilling machine, 1 drill head Olive, 1 x drill head corner bearing Roto NT with left and right roller tab ...