leifeld co used for sale

A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.

Brand: Atlas Compo Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198kg. Assets: 5.5 kW Sound level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0- 10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm State machine: Very good Electrical connection: 3 phase Missing parts: No Photos/film available: Photos available 10.2.192

dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU316W637 LocationBarneveld MakeMixaco TypeCM-30 No.SN050024 Year of construction2005 Main Features MaterialStainless steel Volume24 Ltr. Motor5.5 KW Specified Features - Cold mixer Cold mixercheck Capacity24 l Vessel sizesø 400 x 300 mm Inlet400 mm Manual operated outletcheck Outletø 125 mm With motor5.5 kW (400V, 1425 rpm) Rotor speed1425 rpm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Total height1,25 m Weight250 kg Floorspace1,40 x 0,90 m Extra SpecificationsWith 2x mobile barrels, volume 24 l each.Cold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

General SKU204U935 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120712 Pressure Working pressure20 Bar Main Features Heating (medium)Steam Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity24 kW Electric capacity31,1 kVa, 42,3A With coolingcheck (no cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2800 rpm Motor4 kW, 340-690 volt, With temperature controllercheck With controlTouchscreen Information Year of construction05-2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,60x0,36 m Total height1,32 m Weight309 kg Extra Specificationstest pressure 32,5 barTemperature control unitsSingle TemperiertechnikHeat exchangers > Tem ...

General SKU204U930 LocationBarneveld MakeSingle TypeChill Advanced C-6-W Mach.No.152170 Pressure Working pressure17 Bar Main Features Heating (medium)Electric Capacity6 KW Temp.30 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck With coolingcheck Capacity6 kW Temperature-5/+30°C With pumpcheck 3,1m³/h (2x) With temperature controllercheck With controlcheck Information Year of construction2015 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,30x0,65 m Total height1,70 m Weight300 kg Extra SpecificationsPower 11.7 kVA, 16,3A, test pressure 21 bar, refrigerant medium R134a, volume 4,0 kg Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU204U937 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.083815 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating medium:Water Heating capacity24 kW With coolingcheck (No cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200 ltr/min, Hmax 80 m, 2800 rpm Motor400-690 volt, 4 kW, 2950 rpm With temperature controllercheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,60x0,32 m Total height1,21 m Weight309 kg Extra SpecificationsPower 30.6 kVA, 44.2 A, test pressure 32,5 bar enclosure of machine not complete. Temperature control unitsSingle TemperiertechnikHeat exchangers > Tempera ...

General SKU271W404 LocationBarneveld MakeConthermo TypeSBE 50 No.10190007 Year of construction2002 Main Features MaterialStainless steel Volume50 Ltr. Motor3 KW Specified Features - Cooking pan Stirring-cooking vesselcheck Capacity50 l Vessel sizesDia. 700x530 mm Flat bottomcheck OutletDN50 With covercheck Electric heatingcheck 2,7 kW, 400 volt With propellor stirrercheck With motor0,38 kW, 400 volt, 1420 rpm With variable speed drivecheck Speed mixing shaft1420 rpm MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Total height1,30 m Weight210 kg CEcheck Floorspace1,0 x 1,0 m Extra SpecificationsTemperature max 80°C, with temp controlCooking pansConthermoStirring vessels > Cooking pansBrand > Conthermo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any  ...

General SKU331W747 LocationBarneveld MakeGWK TypeTeco tt 60.12.d25 Mach.No.207515-01-01-1 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity12 KW Temp.160 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Thermal oil heatercheck Electric heatingcheck Heating medium:Oil Heating capacity12 kW Electric capacity13,5kW With coolingcheck ( no cooling compressor) Capacity12kW Temperature-25/+160°C Tank capacity5 l With pumpcheck Capacity3,6 m³/h Information Year of construction2005 Total height1,20 m CEcheck Floorspace0,52 x 1,30 m Weight290 kgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

General SKU331W748 LocationBarneveld MakeGWK TypeTeco tt 60.12.d25 Mach.No.207515-01-03 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity12 KW Temp.160 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Thermal oil heatercheck Electric heatingcheck Heating medium:Oil Heating capacity12 kW Electric capacity13kW With coolingcheck (no cooling compressor) Capacity12kW Temperature-25/+160°C Tank capacity5l With pumpcheck Capacity3,6 m³/h Information Year of construction2005 CEcheck Floorspace0,52 x 1,30 m Total height1,20 m Weight290 kgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to  ...

General SKU204U940 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083817 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Sin ...

General SKU204U938 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120711 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity24 kW With coolingcheck (No cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck Information Year of construction5/2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 31.1 kVA, 43.3ATest pressure 32.5 bar Machine casing is not present.Temperature control unitsSingle Temper ...

General SKU300P750 LocationBarneveld MakeFryma Maschinen AG (DE) TypeDelmix MZM-VK-7 No.L 14500 Year of construction1991 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter90 mm Specified Features - Colloid mill MaterialStainless steel EmulsifierVacuum emulsifying system Vacuum (t)check Rotor sizesdia.120mm With hopper+/- 7 ltr Hopper jacketed(+ 1 bar) Inletdia.90mm Outletdia.60mm Motor2,2 KW, 220/380 Volt With gate type stirrercheck With scraperscheck Motor0,12 KW, 220/380 Volt With vacuum pumpEdwards RV12 Motorcheck Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,3x0,8 M Total height1,7 M Weight240 KGColloid millsFrymaMills > Colloid millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

General SKU207S950 LocationBarneveld MakeJulabo TypeFC-1200S Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information Mach.No.10071327 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU207S949 LocationBarneveld MakeJulabo TypeFC-1200S Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information Mach.No.10070753 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU207S028 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10255538 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU207S030 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10148820 Floorspace0,5x0,6 m Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU207S033 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Floorspace0,5x0,6 m Total height0,5 m CEcheck Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKU207S034 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10148819 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU207S029 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10255538 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU207S024 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10148818 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU276T625 LocationBarneveld Makeunknown missing type plate Main Features MaterialStainless steel Motor4 KW Inlet diameter870 mm Specified Features - Coating pan MaterialStainless steel, Stainless steel 1.4301 (304) Coating pancheck Batch size± 240 kg Pan diameterdia. 1500 Pan depth900 mm In-/Outletdia. 870 mm Motor4 kW 220/380 Volt With variable speed drivecheck Information Mounted on framecheck With switchcheck Floorspace2x1,7 m Total height2,1 m Weight1300 kgCoating pans-Coating pans > Coating pansBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU401S1130 LocationBarneveld MakeEmerson network power TypeHPF12U302A3P10020 Mach.No.10940780001 Main Features Heating (medium)Gas Temp.18 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck With coolingcheck Temperature18-27°C. With temperature controllercheck With controlcheck Information Year of construction2012 With switchcheck With switchgearcheck( as is) CEcheck Floorspace0,9x0,75 m Total height2,05 m Weight300 kg Extra Specificationsthis machine is used to cool airTemperature control unitsLiebert HPFHeat exchangers > Temperature control unitsBrand > Liebert HPF What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKU285S358 LocationBarneveld MakeWalter Brucks (D) Type11G No.2619 Year of construction1965 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter630 mm Specified Features - Coating pan Coating pancheck Pan diameter1050mm Pan depth670mm In-/Outletdia. 630mm Motor1,1 kW 220/380 Volt MaterialStainless steel Information Floorspace1,4x1,2 M Total height1,5 M Weight450 KgCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU347W886 LocationBarneveld MakeIMA TypeHP/ M025 No.HPT-2342 Year of construction2008 Main Features MaterialStainless steel Specified Features - Coating pan MaterialStainless steel 1.4306 (304L) Coating pancheck Pan diameter800 mm Pan depth650 mm Cylindrical width150 mm Conical width250 mm Motor0,55kW, 400V, 2830rpm (EX) With frequency controllercheck With fancheck Motor0,37kW, 400V, 1390rpm (ex) With air filtercheck With spraying armcheck With dosing pumpcheck graco pump 248 bar Motorcheck air motor Information With switchgearcheck (as is) (1.25x0.65x2.10 m) Floorspace1.9 x 1.0 m Total height1.9 ATEX compatiblecheckCoating pansIMA ItalyCoating pans > Coating pansBrand > IMA Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

General SKU204U1433 LocationBarneveld MakeCollin Type202x400 No.1209-06-07 Year of construction2007 Main Features Motor2.5 KW Width405 mm Specified Features - Roll compactor MaterialStainless steel Roll compactorTwo roll mill Roll width450 mm Roll diameter202 mm Motor2,5 kW, 400 volt, 4000 Nm Roll speed0,3-4 rpm Rolls can be adjustedcheck With hydraulic unitcheck Information Mounted on framecheck ( steel wheels) Total height1,96 m Weight1900 kg CEcheck Floorspace2,25x1,34 m Extra SpecificationsWork width 405 mm. walz tempering, +5 till +50°C. Fast hub back walz 80 mm, fine hub 0.08-2.99 mm. pressure cap. 100 kN. Without 2-roll walzen Roll compactorsCollinCompactors > Roll compactorsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU218W173 LocationBarneveld MakeLauda TypeITH 350 EX Mach.No.LSI 51392 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity36 KW Temp.380 °C Specified Features - Temperature control unit MaterialMild steel Thermal oil heatercheck Electric heatingcheck Heating medium:Therminol 72 Heating capacity36 kW Electric capacity42,5 kW Temperature+20°C/+380°C Tank capacity60 Ltr. With pumpcheck Capacity8m³/h Motor5,5kW 400Volt With temperature controllercheck Information Year of construction2008 Total height2,0 m CEcheck Floorspace1,85x0,98 m Weight1240 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU300U599 LocationBarneveld MakeDriam TypeDriacoater 500/600 vario No.KD37310 Year of construction1995 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Coating pan MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Coating pancheck Coating installationcheck Capacitymax: 1: 77 Ltr., 2: 148 Ltr. Batch size30 kg Pan diameter1: 500 mm, 2: 600 mm Pan depth1: 460 mm, 2: 600 mm Cylindrical width1: 330 mm, 2: 470 mm Conical width1: 120 mm, 2: 120 mm In-/Outletdia. 200 mm Motor0,55 kW, 230/400 volt (EX) With frequency controllercheck (Typ VLT 2015) Pan speed5-27 rpm With electric heatingcheck With fancheck Motor2,2 kW, 380/660Volt, 2825 rpm (EX) With air filtercheck With spraying armcheck (Model 970) With dosing pumpcheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight850 kg CEche ...

General SKU900WP088 LocationBarneveld MakeDeltatherm TypeHKG-W-50/12 Main Features Capacity30 KW Information Extra Specificationselectrical power: 30 kW cooling power ( -20°C ) 50 kW Cooling power ( -60°C) 7 kW, Medium:Therminol D12, manufactured 2012Temperature control unitsDeltathermHeat exchangers > Temperature control unitsBrand > Deltatherm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300M410 LocationBarneveld MakeFuji Paudal Co.ltd TypeEXDFS-100 No.19034 Year of construction1988 Specified Features - Roll compactor MaterialStainless steel Roll compactors Granulatorcheck Flat diecheck Die sizes260 x 160mm Number of dies available:1 Die perforationdia. ± 3mm Motorcheck With variable speed drivecheck Trough sizes315 x 180mm With motorcheck With variable speed drivecheck With metering screwcheck Screw sizesdia. ± 100mm With hoppercheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,3x1,2 M Total height1,4 M Weight900 KG Technical specs Extra informationtrough sizes: 315 x 180 mm: screw dia. ± 100mm: die sizes 260 x 160 mmRoll compactorsFuji PaudalCompactors > Roll compactorsBrand > Fuji Paudal What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU212W134 LocationBarneveld MakeTricom Frimafa SWM Typeschudbed VFB 10./3 No.00064-01 Year of construction2000 Main Features MaterialStainless steel Motor22 KW Surface9.36 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface9,36 m² Bed sizes7800x1200 mm Product inletDia. 1000 mm and 600 mm Product outletDia. 600 mm (3x) Number of sections:1 Air inletcheck Air outletcheck Vibro motor2x Motorcheck With fan3x A&N, type CHAE 4-170 and CMBF 400 Motor15+22+22 kW, 400/690 volt With dust filtercheck MaterialStainless steel 1.4301 (304) Information Total height2,60 m Weight6170 kg Floorspace8,50x1,80 m Extra SpecificationsWith filter installation, 3x fan, total dimensions 6200x2300 mm, height 2820 mm, with inlet and outlet.The filter unit is equipped with 2 heat exchangers.Fluid bed dryers continuousTricom FrimafraDryer ...

General SKU430W1383 LocationBarneveld MakeHuber TypeHTS 30-H6 Pressure Working pressure4.7 Bar Main Features Heating (medium)Electric Capacity30 KW Temp.90 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Heating medium:Water Temperature3°C-95°C Tank capacity44 l., (26 l.) With pumpcheck Capacity240 l/min With temperature controllercheck Information Mach.No.S506504 Mounted on wheelscheck With switchgearcheck Floorspace1,10x1,10 m CEcheck Total height1,20 m Weight270 kg Extra SpecificationsThe HTS has no mechanical refrigeration but is fitted with a circulation pump and a plate heat exchanger. This compact circulator provides low cost cooling with a stable pressure and flow to the application. As no mechanical refrigeration system is fitted (compressor etc.), the machine is silent, efficient and energy saving ...

General SKU209U082 LocationBarneveld MakeFriedhelm Stechel GmbH/Schrader Apparatebau GmbH TypeKC160-500 No.D30414 Year of construction2014 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter750 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Capacity± 6200 Ltr. Batch size500 Ltr. Pan diameterdia. 2000 mm Pan depth2000 mm In-/Outletinlet ø 750 mm, outlet ø 200 mm (discharge bottom) Pan can be tiltedcheck (with motor 0,55 kW (220/380 V) Motor5,5 kW (220/380-420 V) With frequency controllercheck With spraying armcheck Information Mounted on framecheck With switchcheck With switchgearcheck(as is) Weight4500 kg CEcheck Floorspace3,7 x 3,3 m Total height3,2 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

General SKU343T932 LocationBarneveld MakeFriedhelm Stechel GmbH (D) TypeADF-120 No.D11704 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter745 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Batch size150 kg Pan diameter1200 mm Pan depth640 mm In-/Outletdia. 745 mm Motor1,5 kW 400 Volt Information Total height2,0 m Weight400 kg CEcheck Floorspace1,7x1,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU343T930 LocationBarneveld MakeFriedhelm Stechel GmbH (D) TypeADF-120 No.D11904 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter745 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Batch size150 kg Pan diameter1200 mm Pan depth640 mm In-/Outletdia. 745 mm Motor1,5 kW 400 Volt Information Total height2,0 m Weight400 kg CEcheck Floorspace1,7x1,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU343T931 LocationBarneveld MakeFriedhelm Stechel GmbH (D) TypeADF-120 No.D11904 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter745 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Batch size150 kg Pan diameter1200 mm Pan depth640 mm In-/Outletdia. 745 mm Motor1,5 kW 400 Volt Information Total height2,0 m Weight400 kg CEcheck Floorspace1,7x1,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU204U929 LocationBarneveld MakeCollin TypeForm 202x400 Year of construction2006 Main Features Motor2.5 KW Width405 mm Specified Features - Roll compactor MaterialStainless steel Roll compactorTwo roll mill Roll width405 mm Roll diameter202 mm Motor2,5 kW, 400 volt, 4000 Nm Roll speed0,3-4 rpm Rolls can be adjustedcheck With hydraulic unitcheck Information Mounted on framecheck Mounted on wheelscheck ( steel wheels) Floorspace1,34x2,25 m CEcheck Total height1,96 m Weight1900 kg Extra SpecificationsWork width 405 mm. walz tempering, +5 till +50°C. Fast hub back walz 80 mm, fine hub 0.08-2.99 mm. pressure cap. 100 kN. Without 2-roll walzen Roll compactorsCollinCompactors > Roll compactorsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKU204U051 LocationBarneveld MakeSollich TypeKK 420 Spezial No.0628 Year of construction09/1998 Main Features MaterialStainless steel Length6000 mm Width600 mm Specified Features - Belt cooler Cooling beltcheck Belt can be cooledcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck Total height1.14 m Weight2000 kg CEcheck Floorspace5,32x0,99 m Extra SpecificationsWithout belt, without control, incomplete this beltcooler was part of a SKU 204U1442 ( sollich FKW-s 15 chiller) Belt coolersSollichBelt coolers > Belt coolersBrand > Sollich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU204U035 LocationBarneveld MakeSollich TypeKK 420 No.0618 Year of construction07/1997 Main Features MaterialStainless steel Length6000 mm Width600 mm Specified Features - Belt cooler Cooling beltcheck Belt width600 mm Belt length6000 mm With motorcheck Belt can be cooledcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck With switchcheck Weight2000 kg CEcheck Floorspace6,0 x 1,60 m Total height1,2 m Extra SpecificationsWithout belt, without control, incomplete Belt coolersSollichBelt coolers > Belt coolersBrand > Sollich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U605 LocationBarneveld MakeGS Coating System TypeHT/M3 No.HT-2191 Year of construction1995 Main Features MaterialStainless steel Motor0.22 KW Inlet diameter80 mm Specified Features - Coating pan MaterialStainless steel 1.4401 (316) Coating pancheck Capacity2-4 Ltr. Pan diameter450 mm In-/Outletdia. 80 mm Motor0,22 kW, 380 volt With frequency controllercheck With electric heatingcheck With fancheck Motor0,25 kW 220/380 Volt With spraying armcheck With dosing pumpcheck (Masterflex Model No. 7523-35) Information Mounted on wheelscheck With switchgearcheck Total height1,65 m Weight450 kg CEcheck Floorspace1,04 x 0,80 mCoating pansGS Coating SystemsCoating pans > Coating pansBrand > GS Coating Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

General SKU300U585 LocationBarneveld MakeLödige TypeLHC 25/30 No.14986 Year of construction2001 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter130 mm Specified Features - Coating pan Coating pancheck Coating installationcheck Capacity2.5 Ltr Batch size2,5 Ltr. Pan diameter300 mm Pan depth313 mm Cylindrical width125 Conical width50 In-/OutletDia: 130mm Motor0,55kW (240/380 V) 1360/47rpm With frequency controllercheck Pan speed3-20 rpm With electric heatingcheck 4kw, 100-120°C With fancheck Capacity150 m³/h, Motor2,2 kW (230/400V), 2820rpm With air filtercheck With spraying armcheck With dosing pumpcheck Verderlab CD-70 Motor0.03 kw Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Weight690 kg CEcheck Floorspace1.7 x 0.9 m Total height1.5 m Extra SpecificationsThis machine is supplie ...

General SKULU004 LocationGermany MakeNeuhaus Neotec GmbH D-27777 Ganderkesee TypeContinuous Fluid Bed Dryer FB 35/3 Static, non vibrating FBD No.N3662-0001 Year of construction2013, reconditioned in 2021 Main Features MaterialStainless steel Motor18.5 KW Surface1.5 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,5 m2, Conidur plate type Bed sizes430x4190mm Product inletDia: 150mm Product outletDia: 150mm, through rotary valve type ZZS Number of sections:3, Length per zone 1520 / 1460 / 1460mm Air inletDN200 Air outletDia: 200mm With fan(2x), Inlet- and exhaust air fan, make Ventec Köln, type VHR-355-224MB. Motor1x 15kW, 400/690Volt, 2930rpm & 1x 18,5 KW, 400/690 Volt, 2930rpm Capacity4350 Nm3/h (total inlet air volume) / max 52 kg/h water evaporation With dust filtercheck Heating unit (steam)(3x), make Caldarius Apparat ...

General SKU324U770 LocationBarneveld MakeDiosna Dierks & Söhne GmbH TypeCoater VCC3-15 No.461-001 Year of construction2010 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter100 mm Specified Features - Coating pan Coating pancheck Coating installationcheck Capacity3 Ltr. Batch size2-15 kg Pan diameter400 mm Pan depth220-300 mm Conical width100 mm (2x) In-/OutletIn ø:100 mm, out ø: 65 mm Motor0,55 kW (240/415 V) 1360/272 rpm With frequency controllercheck Pan speed90-230 rpm With fancheck (AVENT, RVVC-125-RR) Capacity900 m³/h Motor11 kW (415/690 V) With air filtercheck With spraying arm6 nozzles MaterialStainless steel 1.4404 (316L) Information With switchcheck With switchgearcheck (as is) Weight550 kg Floorspace1,1 x 0,7 m ( with cabinet 3,5x3 m) Total height1,5 m ( cabinets 2,3 m) Extra Specificationswith TÜV The Diosna VCC 3-15 is  ...

General SKU309S493 LocationBarneveld MakePP Milano P. Pellegrini (It) TypeSPGR 300 No.1479 Year of construction2000 Main Features MaterialStainless steel Motor4 KW Inlet diameter520 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Pan diameter1570mm Pan depth1400mm Cylindrical width350mm Conical width502mm (2x) In-/Outletdia. 520mm Motor4 kW 380 volt (Ex) With spraying armcheck Information Floorspace1,9x1,9 M Total height2,4 M Weight1500 KgCoating pansPellegriniCoating pans > Coating pansBrand > Pellegrini What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU062A298 LocationBarneveld MakeGlatt TypeGC-1000 No.100594 Year of constructionunknown Main Features MaterialStainless steel Motor1.1 KW Inlet diameter500 mm Specified Features - Coating pan Coating installationDrum coater (1x) Pan diameter1000 mm Pan depth800 mm In-/Outlet500 mm Motor1,1 KW, 380 Volt (Ex) With frequency controllercheck With steam heatingcheck With fantype RC4 U160 RG GR360 Capacity2000 m3/hr Motor12,5 kW, 380 Volt (Ex) With air filtercheck With spraying armcheck MaterialStainless steel Information With switchgear( as is) (2x), Dim. 170x50x220 CM + 120x60x220 CM ( as is) ATEX compatiblecheckCoating pansGlattCoating pans > Coating pansBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

General SKU305S478 LocationBarneveld MakeManesty Accela-Cota Type48 No.1 Q 175 Year of constructionunknown Main Features MaterialStainless steel Inlet diameter480 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Batch size+/- 150 Kg Pan diameter1215mm Pan depth950mm Cylindrical width500mm Conical width225mm (2x) In-/Outletdia. 480mm Motorcheck Information Total height2,0 M Weight750 Kg Floorspace1,8x1,7 MCoating pansManestyCoating pans > Coating pansBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU290S402 LocationBarneveld MakeF. Widmann & Sohn Apparatebau (D) Type160 Ltr. No.1346B-3 Year of construction1966 Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Cooking pan Cooking vesselcheck Capacity160 ltr. Vessel sizesdia. 680x600mm With jacket31 ltr. Without motorcheck Vessel can be tiltedcheck MaterialStainless steel 1.4541 (321) Information Floorspace1,4x1,1 M Total height1,0 M Weight150 KgCooking pansF. Widmann & Sohn ApparatebauStirring vessels > Cooking pansBrand > F. Widmann & Sohn Apparatebau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0083 LocationBarneveld MakeUnknown manufacturer plate is missing Year of constructionunknown Main Features Capacity3 KW Motor0.37 KW Temp.90 °C Specified Features - Temperature control unit Vessel sizesdia. 270x400mm Top connections2 Outletdia 40mm Temperature control units MaterialStainless steel Water heatercheck Electric heatingcheck Heating medium:Fluid Electric capacity3 kW With pump0,37 kW 220-240/380-415 Volt With control 30-90 °C Information Mounted on framecheck Floorspace0,6x0,6 M Total height1,3 M Weight100 KgTemperature control units-Heat exchangers > Temperature control unitsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU277N321 LocationBarneveld MakeWalter Brucks TypeXI No.4332 Year of construction1971 Main Features MaterialCopper Motor1.5 KW Inlet diameter1200 mm Specified Features - Coating pan MaterialCopper Coating pancheck Batch size± 130 KG Pan diameter1200mm Pan depth650mm In-/Outletdia. 735mm Motor1,5 KW, 380/220 Volt Pan speed3 speeds Information With switchcheck Floorspace1,4x1,2 M Total height1,5 M Weight300 KGCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU315T1297 LocationBarneveld MakeWeisshaar TypeLKTA 90 Mach.No.205149 Pressure Working pressure1 Bar Main Features Heating (medium)Electric Capacity8 KW Specified Features - Temperature control unit MaterialStainless steel Temperating machineair cooling and drying unit Electric heatingcheck With coolingcheck R407c, volume 10,7 kg Temperature-15/48 °C. Motor8 kW 400 Volt Information Year of construction2005 Total height2 m CEcheck Floorspace1,2x1,1 m Weight410 kg Extra SpecificationsRefrigeration fluid R407C cooling capacity 21 kW operating pressure 24 bar nominal air flow: 900 Nm³/h (15 Nm³/min) airflow excess heat 5500 m³/h air connections DN 125 condensate drain 3/4 Temperature control unitsWeisshaarHeat exchangers > Temperature control unitsBrand > Weisshaar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...