leifeld co used for sale

4000 werkuren! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Control System: Touch-screen operator panel Operation: Automatic color mixing and dosing Components of the Machine - Touch-screen control panel (CMA Challenger 151) - Integrated dosing & mixing system - Agitator / stirring unit (working components for mixing) - Pneumatic system / pressure control (pressure gauge and pneumatic connections) - Quick-release connections for tools/stirrers - Recipe management software (AURORA MIX / formula control system or equivalent), with integration into color-matching systems.

Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible.

approx. 150 pieces Corlettes, Cordes 2.40m - used - : Prices (net) per piece from location: 139.-€ Manufacturer: Cordes Type: UC-240.500 Year of construction: approx. 2000-2022 Load capacity: 800kg Metrics: Height: approx. 2.50m (approx. 80% of the number of pieces), rest approx. 1.80m and 1.50m high Width: 2.40m Depth:1.10m Foldable Stackable: 3 compartments without runners Color: Blue Intermediate floors: only a few Condition: good Available: immediately Location: Ravensburg

ISVE COMBI 80/80S-GR700, including loading and extraction belts, sturdy supporting structure, TWIN SHAFT SHREDDER with, loading hopper, shredding chamber 800 x 800 mm., dust and liquid proof bearing cases, n.2 shafts on upper part, n.42 rotating knives with staggered hooks, n.2 planetary gearboxes, n.2 x 11 kw Siemens drives, automatic inversion on overcharge, GRANULATOR type C 40-70, soundproof cased, rotor wiudth 700 mm, rotor diam.400 mm, screen 40 mm, V-belt transmission, 22 kw drive, Electric cabinet wit S7-1200 Siemens PLC and touch screen display, Users manual, CE, electrical drawings, installed power - used power in work: about 60-65% : 44 kW, availability: immediate, working width: 800 mm., conditions: fully reconditioned, type: SHREDDER + GRANULATOR - 40 mm screen

A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible.

Materials: CPP // Film Width (Max): 2800 mm

Materials: LDPE, LLDPE, HDPE, MDPE, mLLDPE // Film Width (Max): 1100 mm

Screw Diameter: 64 mm // Throughput: 480 kg/h

Materials: LDPE, LLDPE, mLLDPE, Metallocene, EVA, EVOH, PA // Film Width (Max): 1800 mm

Printing Width: 1050 mm // Web Width: 1120 mm

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.

Brand: Atlas Compo Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198kg. Assets: 5.5 kW Sound level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0- 10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm State machine: Very good Electrical connection: 3 phase Missing parts: No Photos/film available: Photos available 10.2.192

General SKU397W1230 LocationBarneveld MakeCoperion TypeWZK 102 P1 CR Pressure Working pressure shell4 Bar Main Features MaterialAluminium Inlet diameter100 mm Specified Features - Diverter valve MaterialAluminium With jacketcheck General No.109557 Year of construction2005 Floorspace0,80x0,55 m Total height0,35 m Weight100 kg Extra Specifications1x input dia. 100mm, 2x output, dia. 100mmPaints & coatingsPowdered foodsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersDiverter valvesCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicCoperionIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Foo ...

General SKU397W1229 LocationBarneveld MakeCoperion TypeWZK102-(production area 1)-CR Main Features MaterialAluminium Inlet diameter100 mm Specified Features - Diverter valve Capacity4 bar MaterialAluminium With jacketcheck General No.119741 Year of construction2005 Floorspace0,80x0,55 m Total height0,35 m Weight100 kg Extra Specifications1x input dia. 100mm, 2x output, dia. 100mm,allowable temperature 100°CPaints & coatingsPowdered foodsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersDiverter valvesCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicCoperionIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chem ...

General SKU397W1219 LocationBarneveld MakeCoperion TypeWZK 71-P1-CR Pressure Working pressure shell4 Bar Main Features MaterialAluminium Inlet diameter70 mm Specified Features - Diverter valve MaterialAluminium With jacketcheck General No.124165 Year of construction2006 Mounted in framecheck Floorspace0,70x0,40 m Total height0,70 m Weight100 kg Extra SpecificationsAllowable temperature 100°C,in and output dia. 70 mm,pneumatic drivePaints & coatingsPowdered foodsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersDiverter valvesCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicCoperionIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffeeIndust ...

General SKU426U1358 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume160 Ltr. Motor18 KW Specified Features - Universal mixer Universal mixercheck Capacity±160 L Vessel sizes⌀ 730 x 450 mm With covercheck Inlet⌀ 730 mm Pneumatic operated outletcheck Outlet⌀ 200 mm With motor18 kW, 380 V, 1465 rpm Rotor speedmax. 540 rpm With lump breakercheck With motor4.4 kW, 380 V, 2840 rpm Rotor speed2840 rpm MaterialStainless steel 1.4306 (304L) General TypeGRAL 300 Mach.No.84MG30076 Year of constructionUnknown With switchgear(as is) Floorspace1 x 2.3 m Total height2.6 m Weight1500 kgPaints & coatingsPowdered foodsGeneric medicinesUniversal mixersCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicColletteIndustries > Chemi ...

General SKU330W712 MakeCollette Gral Type300 Ex Pro High shear MR103 Mach.No.99.M12.01 Year of construction2000 Pressure Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor18 KW Specified Features - Universal mixer Universal mixercheck Capacity300 l. Vessel sizesDia. 840x600 mm With covercheck InletDia. 150 mm Pneumatic operated outletcheck OutletDia. 200 mm With jacketcheck With motor18/12 kW, 380 volt, 1465/975 rpm With lump breakercheck With motor7,5 kW, 380 volt, 2930/1460 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) With jacketcheck General Mounted on framecheck LocationBarneveld With switchgearcheck Floorspace1,20x2,50 m Total height2,55 m Extra SpecificationsHydraulic unit, 15 kW, 380-415 volt, 1420 rpm,2-doors control cabinetPaints & coatingsPowdered foodsGeneric ...

General SKU234S117 MakeBühler Cobra 251V TypeRWK 251 / SRK 175 No.10078796 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 220x690mm Inletdia. 25mm Outlet75x35mm Motorcheck MaterialStainless steel General With switchgear(as is) Floorspace1,6x0,9 M Total height1,9 M Weight1100 KgPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > C ...

General SKU304P679 MakeMachines Collette N.V. (BE) TypeGRAL 10 Mach.No.95GRS00100070 Year of construction1995 Main Features MaterialStainless steel Volume10 Ltr. Motor1.5 KW Specified Features - Universal mixer Gral-granulatorcheck Capacity10 Ltr. (nett.6 Ltr) Vessel sizesdia.250mm x180mm With covercheck With motor1,5/0,85 KW, 380 Volt Rotor speed430/660 rpm With lump breakercheck With motor0,6/0,8 KW, 380 Volt Rotor speed1500/3000 rpm With timercheck MaterialStainless steel 1.4404 (316L) General Mounted on framecheck LocationBarneveld With switchgearcheck Floorspace1,0x,4 M Total height1,3 M Weight200 KGPaints & coatingsPowdered foodsGeneric medicinesUniversal mixersCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicColletteIndustries > Chemi ...

General SKU250X201 LocationBarneveld CEcheck MakeGeppert-band Main Features Motor0.18 KW Length2600 mm Width640 mm Specified Features - Conveyor belt Conveyor beltcheck Belt width640 mm Belt length2600 mm With side guidescheck With motor0,18 kW, 220-240 volt, 1360 rpm With variable speed drivecheck MaterialPTFE (Teflon) With jacketcheck General TypeGAL-60 Mach.No.1308014 Year of construction2012 Mounted on framecheck Floorspace2,70x1,00 m Total height2,80 mConsumer wasteStarchRubberAgrochemicalsSpicesConveyor beltsPaper & otherOrganicsE-waste & metalAnimal feedOther feedPlastic & rubberGeppert-Band GmbHIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesConveying systems > Conveyor beltsIndustries > Recycling > Paper & otherIndustries > Recyclin ...

General SKU312W1579 LocationBarneveld CEcheck MakeAnlagenbau Stampfer GmbH Main Features Motor2.2 KW Length11500 mm Width1637 mm Specified Features - Conveyor belt Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 11,466 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) With jacketcheck General TypeAS-WRB-1000 Mach.No.144.0002 Year of construction2014 Floorspace11,4x1,6 m Total height1,0 m Weight5500 kg Extra Specificationsbelt rolls HDPEConsumer wasteStarchRubberAgrochemicalsSpicesConveyor beltsPaper & otherOrganicsE-waste & metalAnimal feedOther feedPlastic & rubberStampfer HaanIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesConveying systems > ...

General SKU312W1580 LocationBarneveld CEcheck MakeAnlagenbau Stampfer GmbH Main Features Motor2.2 KW Length4829 mm Width1637 mm Specified Features - Conveyor belt Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 4,829 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) With jacketcheck General TypeAS-RB-1000 Year of construction2014 Floorspace4,8x1,6 m Total height1,0 m Weight1479 kg Extra Specificationsbelt rolls HDPEConsumer wasteStarchRubberAgrochemicalsSpicesConveyor beltsPaper & otherOrganicsE-waste & metalAnimal feedOther feedPlastic & rubberStampfer HaanIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesConveying systems > Conveyor beltsIndustr ...

General SKU376X933 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume25 Ltr. Motor4 KW Specified Features - Universal mixer Gral-granulatorcheck Capacity25 l. Vessel sizesDia 375 mm x 275 mm: dia 245 mm x 200 mm With covercheck Inlet50 mm With motor4 kW (400 V, 1440 rpm) With variable speed drivecheck Rotor speedMax 420 rpm With lump breaker2 speeds Rotor speed1435/2875 rpm With timercheck MaterialStainless steel 1.4301 (304) General TypeGral 25 Mach.No.94GR100250050 Year of construction1994 Mounted on wheelscheck With switchgear(as is) Floorspace1 x 2 m Total height1,65 m Weight800 kg Extra Specifications- additional 10 litre vessel with jacket.Paints & coatingsPowdered foodsGeneric medicinesUniversal mixersCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pi ...

Spiral cooler dim.260 x 260 x320 cm , 2 spiral belt , width of the belt 60 cm

WATER COOLING TANK, for strand pelletizers, Constructed in AISI4304 stainless steel, On 4 wheels (2 with brakes), Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt., tank : LxWxH 2,5 x 0,5 x 0,25 mt., conditions: very good

Provisur Coater TST Coating machine Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculation pump, variable speed conveyor, adjustable flow, 3Ph Three in stock

Cool Compact Pizza Cooling Table 2-door pizza counter with GN attachment mobile on wheels Granite slab +2°C +12°C Metrics WxDxH 107 x 70 x 113 cm Beleg stations - new and used - can be found in our shop! International shipping costs on request!

feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ALMIG Combi 15-10 rotary screw air compressor YOM 2012. Never used. Motor speed 3000 rpm Motor power 15 kW Volume flow m3/min- 1.84 Volume m3/hour- 110 Max. pressure 10 Bar. Air Receiver Capacity 500L

Putzmeister sewage sludge conveyor system with a maximum delivery rate of 6-7 t per hour and a pressure of 100bar (including pumping) Is no longer in the pit in the pictures, has been cleaned and stored. Fully functional and hardly used Design data (organic) Medium Conveying medium: Sewage sludge Material definition (Fluid I / Fluid II) (1): Fluid 2 Dry matter content: 25 to 30% Type of dewatering: Centrifuge Precipitant (4): Polymer Maximum particle size: 5 mm Type / size of foreign bodies (6): Wood, glass, stones / 80 x 80 x 80 mm Flowability: Like moist soil Temperature of the medium: +5 to +20 °C Density of the medium: 0.9 to 1.1 t/m³ pH value: 6 to 8 Gas formation: None Loss on ignition (5): < 40% Rheological behaviour: Thixotropic Aggressive: No Abrasive: Yes Corrosive: No Sticky: Yes Further data: Installation location: Outside Ambient temperature: -5 to ...

Dimensions (L/W/H): 0x0x0 mm Weight: 1600 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2750x1800x2200 mm Weight: 2500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x730x1380 mm Weight: 350 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x650x450 mm Weight: 40 kg Total power requirement: 0,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU330W711 MakeCollette Gral Type300 Ex Pro high shear MR103 Mach.No.……. Year of construction1999 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor18 KW Specified Features - Universal mixer Universal mixercheck Capacity300 l., (260 l.) Vessel sizesDia. 840x600 mm With covercheck InletDia. 150 mm OutletDia. 200 mm With jacketcheck With motor18/12 kW, 380 volt, 1465/975 rpm With lump breakercheck With motor7,5 kW, 380 volt, 2930/1460 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) With jacketcheck General Mounted on framecheck LocationBarneveld Floorspace1,20x2,50 m Total height2,55 Extra SpecificationsHydraulic unit, 15 kW, 380-415 volt, 1420 rpm2-doors control cabinetPaints & coatingsPowdered foodsGeneric medicinesUniversal mixersCatalysts & fillersDetergent & surf.Cosmetics ...

A screw compressor is offered. Maximum pressure 10bar, volume flow approx. 2020l/min (2.02m3/min) with separate compressed air tank, galvanized. Viewing possible by appointment.

UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.

General SKU268K299 MakeRomaco AG Fryma Koruma Rheinfelden TypeCoBall mill MS-50 No.75439/00 Year of construction2000 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume9.8 Ltr. Motor55 KW Specified Features - Sand mill Vertical sandmill:Annular gap bead mill: (1x) Capacity9,8 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Max. temperature80 Degr. C. Motor55,0 KW, 400/690 Volt (Ex) Capacity150-1000 Ltr/Hr MaterialStainless steel With jacketcheck General With switchcheck Floorspace2,1x1,0 M Total height2,3 M ATEX designedcheckPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicRomacoIndustries > Chemical > Paints & coatingsIndustries > Food &  ...

3 controllers + 4 industrial screens, Product control + …, Electronics GmbH, used Used! - comes from a spare parts warehouse of a certified production facility, - The parts were removed from die casting machines. Measuring system controls: 3 used measuring system controls from company Electronics, Type: Product control S/N: 0513 4 pcs used industrial screens for the measuring systems At a special price of €500 for all 7 devices without warranty

Cold storage tank 150HL Vertical cylindrical stainless steel vessel. Located out doors with external cladding and insulation finished in riveted stainless steel . Fitted with cooling jackets. Mounted on 4 stainless steel legs with adjustable feet Approx dimensions : Overall height 5000mm Overall diameter 2000mm Legs 800mm Capacity 150HL Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU426U1359 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume150 Ltr. Motor11 KW Specified Features - Universal mixer Universal mixercheck Capacity150 Ltr. Vessel sizesDia. 700x450 mm With covercheck InletDia. 80 mm Pneumatic operated outletcheck OutletDia. 200 mm With motor7,5/11 kW, 380 volt With lump breakercheck With motor3/4 kW, 380 volt Rotor speed2840/1430 rpm MaterialStainless steel General TypeGral 150 Mach.No.84MG15031 Year of constructionunknown With switchgearcheck Floorspace2,60x1,00 m Total height2,20 mPaints & coatingsPowdered foodsGeneric medicinesUniversal mixersCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicColletteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdere ...

General SKU300U597 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume75 Ltr. Motor7.5 KW Specified Features - Universal mixer Universal mixercheck Capacitybruto 75 Ltr. (netto 50 Ltr.) Vessel sizesDia. 520x350 mm With covercheck InletDia. 50 mm, 20 mm Pneumatic operated outletcheck OutletDia. 130 mm With motor7,5 kW, 380 Volt, 1440 rpm Rotor speed203/306 rpm With lump breakercheck With motor2,2-3,3 kW Rotor speed1500/3000 rpm MaterialStainless steel 1.4306 (304L) General TypeGral-75 Mach.No.90M67561 Year of construction1989 Mounted on framecheck With switchgear(as is) Floorspace2,2x0,90 m Total height2,2 m Weight1680 kg Extra SpecificationsThe stainless steel contact surfaces in the machine are polished.The machine is supplied with:- Extra agitator equipped with scrapers.- Extra pan with transport cart.- Separate transport cart.Pai ...

Technical data: - Operating hours 4248 h - Load hours 1978 h - Operating pressure 10 bar - Delivery rate 3.34 m³/min - Drive 400 V / 22 kW - Motor speed 3000 rpm - Space requirement approx. W 1300 x H 1250 x D 800 mm - Weight approx. 490 kg

General SKU244X191 MakeKöllemann TypeDT KSF 2XDN300 5500 lg No.0603120/2081250/01 Mach.No.0603120/2081250/01 Year of construction2006 Pressure Working pressure jacket3 Bar Technical specs Max. temperature550 °C Main Features MaterialMild steel Motor1.1 KW Length5500 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter2x 300 mm Length5500 mm Between inlet and outlet4950mm Shaft diameter140mm Pitch150mm InletDia. 200 and 350 mm Outlet400x150 mm With jacketcheck Max. temperature35°C Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed2,0 rpm MaterialMild steel With jacketcheck General LocationBarneveld Floorspace8,0x1,10 m Total height2,0 m Weight2800kg CEcheck Extra Specificationsthe screw is coolableConsumer wastePowdered foodsTea, herbs & coffeeStarch ...

Comaca 225 x 3 mm (fixed angle) Capacity : 225 x 3 mm Strokes/min: 80 str/min Fixed angle -- variable angle: fixed angled Workspace: 1050 x 700 mm Electric motor (power): 1,5 kW

Technical data: - Operating hours 20256 h - Operating pressure 13 bar - Delivery rate 4.09 m³/min - Drive 400 V / 26 kW - Motor speed 3000 rpm - Space requirement approx. W 900 x H 1750 x D 900 mm - Weight approx. 490 kg

1 gebr. Kantenbearbeitungsstraße IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Bj. 1996 Bestehend aus: - Doppelseitige IMA COMBIMA für die Längsbearbeitung: Doppelzerspaner 2 x Fräsen Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappaggregat Bündfräsen 2 x Feinfräsen Profilziehklinge Flächenziehklinge Schwabbelaggregat Glätteaggregat - Drehvorrichtung von läng auf quer - Doppelseitige IMA COMBIMA für Querbearbeitung Schutzfräsen Doppelzerspannen Nutfräsaggregat Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappen am Oberdruck (Nachrüstung auf aktuelles Modell) Bündigfräsen Feinfräsen 2 x MFA Fräsen Nutfräsaggregat Profilziehklinge Flächenziehklinge Kopierschwabbeln (4 Moto ...