leifeld co used for sale

Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990

Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - .ucymachines/ Contact us at - sales@ucymachines

set of machines to manually produce hard covers etc. set consists of: - Record 54 - gluer, warm and cold glue, working width 54 cm - Rimbo 110 - double turning in station, working width 110 cm - Ottima 74 - nip roller press, working width 74 cm - Schmedt Prädeck - board positioning table, 60x40cm (extension possible)

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table glue unit refurbished machine is cleaned and checked and in very good condition.

Syspal 508/023144 Vibratory conveyor Serial: K80201-1 2019, Stainless, conveyor dimensions 1500mm x 270mm, adjustable vibration control, mobile, 1P508h

APV Screw Compressor 3 Screw compressors Control Panel, Fridge watch 2100 system DX system Last run on 404a Last used to run a Spiral Freezer 33 Kw each, Total = 99Kw Max Model: HS2116 Built 1994 Complete with Searle Condensor (4 fan) Model: MDR 110-12 Serial: 961246 Physical dims: 5.1m x 1.16m x 0.7m (h)

saw blade diameter: 275 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: square: 80 mm capacity 90 degrees: flat: 100x70 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 70 mm capacity 60 degrees: flat: 80x60 mm total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5 x0,85 x0,95 m The versatile professional metal circular saw. Convincing in performance and price. • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Cone safety clutch made of hardened steel to protect the saw blades. • 2 speeds 33 + 66 rpm • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Closed cast, m ...

saw blade diameter: 250 mm capacity 90 degrees: round: 85 mm capacity 90 degrees: square: 75 mm capacity 90 degrees: flat: 100x65 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: square: 75 mm capacity 60 degrees: flat: 90x60 mm total power requirement: 0,8 kW weight of the machine ca.: 0,04 t SPECIAL PRICE! The assembly saw with extensive standard equipment and a large cutting area · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Automatic cooling directly on the saw blade · 24 V safety switch in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool Options: Saw blade 57 EUR Machine base type 20505 192,-EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm capacity 90 degrees: round: 80 mm capacity 90 degrees: square: 70 mm capacity 90 degrees: flat: 95x60 mm capacity 45 degrees: round: 70 mm capacity 45 degrees: square: 60 mm capacity 60 degrees: flat: 65x60 mm total power requirement: 1,0 kW weight of the machine ca.: 0,075 t dimensions of the machine ca.: 0,3 x0,8 x0,75 m SPECIAL PRICE! The ideal metal circular saw for workshop and assembly • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Optionally with 230 V or 400 V motor • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Subframe (option) additional price 172,-EUR ATTENTION: Price is without saw blade! (saw bl ...

Automatic collection system for cans, glasses, bottles. Collection of single containers on rotating table so that jams can be avoided. - Specifications: up to 80 containers/min | diameter of table: 1.200mm | 380V, 0.18kW | machine weight: 50kg | dimensions: L1300xW1200xH1000mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 55 cups/minute | filling range: 0-20g | filling accuracy: +/- 0.15g | capacity of hopper: 5L (approx. 3kg powder) | power supply and consumption: 220V, 1.5kW | required compressed air and flow rate: 6-8 bar, approx. 300L/min | flow rate inert gas: approx. 200L/min | machine dimensions: L1900xW1118xH2524mm | weight: 800 kg. Specifications  ...

Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute | filling range: 0-20g | filling accuracy: +/- 0.15g | capacity of hopper: 10L (approx. 6kg powder) | power supply and consumption: 220V, 7.5kW | required compressed air and flow rate: 6-8 bar, approx. 300L/min | flow rate inert gas: approx. 200L/min | machine dimensions: L3420xW2200xH2688mm | weight: 900 kg. Specifications ...

Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | max. packaging size: L(80-700)xW(80-230)xH(10-180) mm | sealing blade length: 380mm | 220V, 5 kW, 6bar, 0.6m? | machine dimensions: L2295xW1160xH1370 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquir ...

Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | max. packaging size: L(80-700)xW(80-380)xH(10-180) mm | sealing blade length: 530 mm | 220V, 5 kW, 6bar, 0.6m? | machine dimensions: L4100xW1610xH1370 mm. Please note that our new prices are often below the usual used prices. Please feel free to inqui ...

Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | max. packaging size: L(80-700)xW(80-380)xH(5-180) mm | sealing blade length: 530mm | 220V, 6.5kW, 6bar, 0.6m? | machine dimensions: L4755xW1660xH1370 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immed ...

Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute | max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm | sealing blade length: 500mm | 220V, 6.5kW, 6bar, 0.6m? | machine dimensions: L5405xW1780xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 differ ...

Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute | max. packaging size: L(80-1000)xW(100-500)xH(5-180) mm | sealing blade length: 630mm | 220V, 6.5kW, 6bar, 0.6m? | machine dimensions: L6350xW1950xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 diffe ...

Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute | max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm | sealing blade length: 530mm | 220V, 6.5kW, 6bar, 0.6m? | machine dimensions: L2935xW1805xH1385 mm. Please note that our new prices are often below the usual use ...

Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lo ...

max. workpiece length: 4500 mm profile spindle: 1 Stück main drive: 20 kW Control: Siemens Weinig Conturex 2 C 114 --------------------------------------- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm -------------------------------------- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: --------------------------------------- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: --------------------------------------- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head --------------------------------------- For horizontal and vertical drilling and milling work without tool changes --------------------------- ...

New DWM Copeland D2DC3-50X-AWM Semi-Hermetic Compressor – 16.8 m³/h – 380V – 28 bar Manufacturer: DWM Copeland Model: D2DC3-50X-AWM Nobmswudz Ijy Ex Ipecu Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 380–420V (Y) / 3 Phase Power Consumption: 9 A Flow Rate: 16.8 m³/h Maximum Pressure: 28 bar Transport Weight: 158 kg

CINCINNATI-MILACRON TWIN SCREW EXTRUDER, for PVC profiles, extruder with 2 x 45 mm conical screws, average production 100 kg/h, 14 kw drive, for profiles with max width 250 mm., calibration desk with 2 pumps x 5 kw, caterpillar pull off unit, contact length 1500 mm, width250 mm., planetary saw, collection table, installed power - used power in work: about 60-65% : 14, capacity: 100 kg/h ca, screws: 45 mm. conical

On offer are 2 pieces of CompAir compressor systems with cooler and dryer as shown in the pictures. Price refers to an investment. If you have any questions, please contact us.

Kopierrahmen / Copyframe O.M.S. COPYSTAR 4050

Koppelbox für Falzmaschinen - Coupling Box for Folding Machines Heidelberg Coupling box I. Year 2003 - Serial-No. 848-300

Koppelbox nach Navigator - Couple Box after Navigator MBO Couple Box Year 2001 - Serial-No. XX174 Cuple Box after Navigator to connect to MBO units

Age 1995, For sale outside Europe, Automatic Elevator Tray-feeder, Auto-cross conveyor feeder to main Print Unit, Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System, 8-mandrel Indexing Turret, with Mandrel Holders for Tubs, 6 x individually hinged dry-offset Print Heads., Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain, Ink Washing System on Print Heads, Positive Suction-cup pick & place and Take-off, 2 x Color Base Printer, 6 kW Jumbo UVITERNO UV Curing Tunnel, Counter/ Stacker station, Max. Container dimension 135 x 180 mm, Max. Printing Length 417 mm, Max. Height of Containers 125 mm, Min. height of Containers 30 mm, Max. speed 9000 containe ...

Turns: 3.25, infeed: south, outfeed: West, infeed height: 3700mm, outfeed height: 1000mm, transport direction: downwards, max. belt speed: 40m/min, max. belt load: 45kg/m. Including an external control cabinet. Documentation available. On-site inspection is possible.

Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used

Perconta Contomat High Performance Self-Service Coin Settlement Terminal Tomatoes are taking over more and more routine tasks from bank employees. The trend that has set standards with automatic cash dispensing and the printing of account statements continues in coin processing with the Contomat. If you are looking for a solution for the customer-oriented deposit of hard change, you are well served with the Contomat self-service terminal. You can find more coin settlement terminals in other sizes - new and used - in our shop! International shipping costs on request!

Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle

Measure filler KHS-Seitz Compakta with 12 filling valves capacity: up to 2.500 bph by 1,0 ltr.

We offer for sale a copper cable crushing and separation line consisting of the following components: 1. VOTECS Machine - Model: EZ 611 - Manufacturer: Votecs - Rated Voltage (Nennsp): 400 V - Control Voltage (Steuersp): 230 V - Hydraulic Pressure: 160 bar - Year of Manufacture: 09/2007 - Rated Current: 38 A - Fuse: 50 A - Frequency: 50 Hz 2. SIDMA Overband - Type: Magnetic - Model: OVB 5620 - Manufacturer: SIDMA - Weight: 680 kg - Consumption: 1500 W - Residual Induction: 400 Gauss - Width (A): 200 mm - Conveyor Belt Speed: 1.5 m/s - Year of Manufacture: 2016 3. MITECO - Manufacturer: Miteco - Rated Voltage: 400 V - Full Load Current: 127 A - Frequency: 50/60 Hz - Phases: 3 + PE - Short Circuit Rating: 35 kA - Enclosure Type: IP54 - Year of Construction: 2015 - Normative References: IEC 60439-1, EN 60204-1 Find more here - .ucymachines/ Contact us at - sales@ucymachines

HAVE A GDY SIR; WE VE 3 PCS USED WOODWARD 733 CONTROL UNITS. AT OUR STOCK PART NO 8237-1177 REVISION B 3PCS WE 1 PC USED WOODWARD LS-5 CONTROL UNIT PART NO 8440 - 2077 A IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Compressor Type Champion 180 TS Properties: Identification number 449001/158 Order no. 10095340 Built-in compressor 158 Compression medium AIR Length 3050 mm Width 2100 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 22 / 12 bar g Speed 1000 min ̄¹ Installed engine power 110 kW

Compressor type Champion 135 TS Volume 12.8 m³/min Properties: Identification number 449001/50 Order no. 50352400 Built-in compressor 50 Compression medium AIR Length 2400 mm Width 2400 mm Total height 2100 mm Weight 2480 kg Volume flow 12.8 m³/min Suction pressure 1 bar Step pressures 1.8 / 7 bar g Speed 1000 min ̄¹ Installed motor power 75 kW Motor revolutions 1000 rpm

Compressor COMPAIR L22 SR-10 Volume 2.86 m³/min Properties: Identification number 100016088/0009 Built-in compressor 6115 Order no. 10698941 Compression medium AIR/LUFT Length 800 mm Width 700 mm Total height 1400 mm Weight 355 kg Volume flow 2.86 m³/min Suction pressure 1 bar Step pressures 10 bar g Speed 3600 min ̄¹ Installed motor power 22 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz

Key data: 48 KW, 60 kVA

We currently offer: No. 008 Atlas Copco generator set Type: QAS60 Engine Perkins 3910/1500 Power 60 KVA / 48 KW Generator LeRoy Somer Hz 50 RPM 1500 IP 23 AVR control R250 Year of construction 2013 dB 87 Connection: 16A, 32A, 63A, socket Operating hours 19532 Metrics L: 2.80m W: 1.15m H: 1.75m Weight: 2130 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.

CONVEYOR BELTS, for waste material and more, sturdy steel structure, constructed in a workman like manner, Italian quality and components, can be lined in PVC, RUBBER or SHUTTER TYPE BARS, Can be prepared and fitted for METAL DETECTORS, and completed with OVERBELT METAL SEPARATORS, Size and characteristics bespoke to the project., Just fill your enquiry with the following data:, - Materials to be transported (photos appreciated), - Quantity in Tons/h, - required working width, - total length, - horizontal length, - diagonal length, - heigh of discharging point, - if prepared for metal detecto, - if fitted with metal detector (in this case, please add maximum contamination size), - if positioned in covered/uncovered place, We will send you a most targeted offer.

feed pressure: 8,0 bar intake capacity: 180 L/min Effective free air delivery: 112 L/min Receiver capacity: 6,0 Ltr. motor: 230 V power capacity: 1,1 kW weight of the machine ca.: 14,0 kg. dimensions of the machine ca.: 380 x 310 x 490 mm Description : - portable craftsman piston compressor - permissible duty cycle up to 30% - 1-stage, direct-coupled, single-cylinder airend - Compressor mechanics working completely OIL-FREE - Very compact design for easy handling - Finely ribbed cylinder and cylinder head - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - an automatically regulating pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges - Safety valve - pre-assembled connection cable with p ...

feed pressure: 10,0 bar intake capacity: 345 L/min Effective free air delivery: 228 L/min Receiver capacity: 50,0 Ltr. motor: 230 V power capacity: 2,2 kW weight of the machine ca.: 51,0 kg. dimensions of the machine ca.: 800 x 390 x 750 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place  ...

feed pressure: 10,0 bar intake capacity: 539 L/min Effective free air delivery: 377 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 3,0 kW weight of the machine ca.: 80,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2x cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head - for optimum temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - Powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Direc ...

approx. 221 pieces corlettes / multi-box, width 2m/ 2.50m / 2.70m, partly stackable - used - : Prices (net) per piece from location: 149.-€ Price (net) Type 3 – stackable: 169.-€, per piece ex location! Manufacturer: Cordes und Koch Type: Corlette / Multi Box Dimensions (L × W × H in cm) Type 1 = 13 pieces (complete sale only) 250 x 115 x 180 Color: Blue Type 2 = 2 pieces 270 x 115 x 240 Colour: green Type 3 = 192 pieces, of which approx. 62 pieces can be stacked Minimum order: 10 pieces 200 x 115 x 180 Colour: blue Type 4 = 14 pieces (complete sale only) 270 x 115 x 188 Colour: green Condition: good Available: immediately Location: 63128 Dietzenbach

Manufacturer: Bär Type of Machine : Coolant Cleaning System Year of Manufacture: 2015 Voltage Supply: 3L/ N/ PE 400 VAC / 50 Hz Control Voltage: 24 V DC Connection Rating: 185 kW / 350 A Max. Fuse Protection: 400 A Minimum Cable Cross-Section: 240 mm² Find more here - .ucymachines/ Contact us at - sales@ucymachines

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3