leifeld co used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 € : 480 € : 2050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7.5 kW : 800 mm : 530 mm : 2355 mm : 2720 mm : 1630 mm : 1230 mm : 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CAS Corporation weighing scale with label printer, model: CL5200-P, serial number: 020640312, year of construction: 06-2020, 100-240 V, 50/60 Hz, 90 W, maximum weight: 6/15 kg, minimum weight: 40 gram, e=d= 2/5 gram, T= -5.998 kg, scale dimensions: 380 mm x 250 mm, total dimensions: 500 mm x 420 mm x 550 mm.

Screw compressor Inverter and dryer integrated. 18.50 kW 12.80 bar 3.35 m3/min Year of Make: 2005 Hours: 20,770

Screw compressor Atlas Copco GA22VSD+FF Inverter and dryer integrated 22 kW 12.75 bar 4.51 m3/min Year of Make: 2015 Hours: 19,431

Screw compressor Atlas Copco GR110 110 kW 20 bar 12.60 m3/min Year of Make: 2001 Hours: 44,098

Screw compressor Atlas Copco GR110 110 kW 20 bar 12.60 m3/min Year of Make: 2004 Cjbqey Nl Rmo Da Srwegt Operating hours: 64,326

Screw compressor CompAir L55 55 kW 7.5 bar 10.69 m3/min Year of Make: 2012 Hours: 53,348

General SKU256K252 LocationBarneveld Material Housing materialStainless steel Disc materialMild steel Rotor materialMild steel Main Features MaterialMild steel Motor15 KW Inlet diameter180 mm Specified Features - Colloid mill MaterialStainless steel Colloid mills GrinderPerforated disc mill (1x) Rotor sizedia. 180mm House jacketedcheck Inletdia. 25mm Motor15,0 KW, 220/380 Volt (Ex) Speed2925 Rpm Information Makeunknown, manufacturer tag is missing Floorspace1,1x0,4 M Total height0,5 M Weight260 KG ATEX compatiblecheck Extra SpecificationsDisc is perforatedColloid mills-Mills > Colloid millsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

General SKU271M389 LocationBarneveld Main Features MaterialStainless steel Specified Features - Coating pan Coating pan(1x) Batch size±130 KG Pan diameterdia. 1200mm Pan depth650mm In-/Outletdia. 700mm Motor1,5 KW, 220/380 Volt MaterialStainless steel Information MakeOnbekend, typeplaat ontbreekt Mounted on framecheck Floorspace1,7x1,3 M Total height1,9 M Weight400 KGCoating pans-Coating pans > Coating pansBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 € : 603.94 € : 0.4 - 2 mm : 600 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16600 € : 318.72 € : 1050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7,5 kW : 800 mm : 530 mm : 1355 mm : 1720 mm : 1630 mm : 1230 mm : 2000 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 mm, 650 mm, 3500 1/min

CNC Teach-in Lathe COLCHESTER Alpha 1350 XT CNC FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 42 mm Rotation max: 3500 RPM Turret: 8 tools Year of construction: 2006 Working hours: 174 working hours only MACHINE IN VERY GOOD CONDITION

Excellent condition - Fully operational - Loading / Transport possible! Table dimensions 1255 x 900 mm, table height 900 mm, motor power 6 kW, speeds 3000/4500/6000/9000 rpm, tool holder SK 40, double-sided electromotive spindle adjustment, electromotive table opening switching 72/105/160/225/305 mm, spindle diameter 30 mm, integral fence AIGNER, extendable workpiece support, spindle height adjustment 150 mm, 4-roll-feed unit MAGGI STEFF 2044, 8 feed rates 4 to 66 m/min, Electromotive Integral Fence Adjustment, Double-sided Table Extensions 580 mm plus Swivelling Stop per Side.

x-travel:2000 mm y-travel:800 mm z-travel:800 mm table-size:2.000 x 700 mm workpiece weight:3500 kg drive capacity - spindle motor:17 kW spindle cone:50 ISO spindle turning speed range:3000 U/min dimensions of the machine ca.:5265 x 3250 x 2730 m weight of the machine ca.:9 t CNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ...

grinding length:4000 mm grinding width:1450 mm workpiece height:1250 mm total power requirement:40 kW dimensions of the machine ca.:12,3 x 6 x 4,8 m distance between columns:1460 mm table surface area:4000 x 1250 mm max. workpiece weight:11.000 kg cross rail adjustment:1250 mm Machine is in very good condition for highest precision! With CNC control SIEMENS 840 D 1 universal grinding support, 7.5 kW, swivelling grinding spindle ±110° Peripheral grinding wheel dimensions Ø 500 x 60 mm Vertical adjustment 350 mm, with dressing device 1 peripheral grinding support, 22.5 kW Grinding wheel dimensions Ø 600 x 100 mm Vertical adjustment 150 mm, with dressing device With 6 magnetic plates arranged on the table Various grinding wheel holders

grinding length:4000 mm grinding width:1450 mm workpiece height:1250 mm distance between columns:1460 mm table surface area:4000 x 1250 mm max. workpiece weight:11.000 kg cross rail adjustment:1250 mm table feed:1- 45 m/min total power requirement:40 kW dimensions of the machine ca.:12,3 x 6 x 4,8 m .machine is in top condition for high precision work! with CNC SIEMENS 840 D 1 universal grinding head, 7,5 kW swivelling of the grinding spindle +/-110° grinding wheel dimension 500 x 60 mm vertical stroke 350 mm with dressing unit 1 surface grinding head, 22,5 kW grinding wheel dimension 600 x 100 mm vertical stroke 150 mm with dressing unit 6 magnetic plates on the table diverse grinding wheel flanges

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm ? 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and a ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining unit ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can acc ...

pressure:40 t throat:360 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:600 mm table surface area:620 x 500 mm pressure of drawing cushion in table:16 t stroke of drawing cushion in table:150 mm table height over floor:850 mm ram surface:300 x 250 mm speed down:200 mm/s speed up:200 mm/s working speed:40 mm/s power requirement:11,0 kW weight:2,8 t dimensions (WxDxH):1,1 x 1,7 x 3,0 m drawing cushion in table:hydraulisch

General SKU362W1147 LocationBarneveld Main Features Length3200 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4301 (304) Vertical conveyor screwcheck Trough-modelcheck Diameter250 mm Length3200 mm Shaft diameter200 mm Pitch0,85 mm Outlet200x200 mm Motorcheck Conveying height± 2m Information MakeUnknown (missing typeplate) Year of constructionUnknown With switchcheck Floorspace4,05x0,60 m Total height0,50 m Weight400 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIVertical screw conveyorsPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, herbs & coff ...

General SKU327X695 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck 2x Capacity2x 150 l. Vessel sizesø 700 x 800 mm Top connectionsDN25, DN40 OutletDN25 Information TypeR409/454 No.M702-723865 Mounted on legscheck in frame Floorspace1,90 x 1,00 m Total height2,20 m Weight500 kg Extra SpecificationsQVF Glass Receiver System – 2 × 150 L Receiver Flasks with Coil Heat Exchanger (Condenser/Cooler)New arrivalsVertical tanksQVF GlasstechnikNew arrivalsTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

General SKU255X231 MakeComi Condor TypeAL FA/1D No.1824 LocationBarneveld Main Features MaterialStainless steel Motor0.25 KW Inlet diameter45 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesDia. 500x290 mm Max. loading weight35 kg Hydraulic operatedcheck Liquid outletDN110 With hydraulic unitcheck Motor0,25 kW, 380 V., 1330 rpm Max. basket speed1400 rpm MaterialStainless steel Information Mounted on foundation platecheck Mounted on wheelscheck Floorspace2,05x1,25 m Total height1,25 m Weight1200 kgNew arrivalsBasket centrifugesComi-CondorNew arrivalsCentrifuges > Basket centrifugesBrand > Comi-Condor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, Th ...

General SKU215X093 MakeCMA LocationBarneveld CEcheck TypeMAT Main Features MaterialStainless steel Volume125 Ltr. Motor5 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity150 kg With motor1,1 kW, 400 volt, Speed mixer11 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) Information No.211 Year of construction2008 With switchcheck (as is) With switchgearcheck (as is) Total height3,50 m Weight1000 kg Extra Specifications- Tumbler mixer with sieve granulator attached - 4 containers with lid - sieve granulator with 4 sieves (nibbler) - control panel and e-panel (as is) New arrivalsTumbler mixersCMA QuimpeNew arrivalsMixers > Tumbler mixersBrand > CMA Quimpe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU255X227 MakeComi-Condor TypeH.T. 600 GMR No.0878 Year of construction1993 Mounted on framecheck Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Motor22 KW Inlet diameter75 mm Specified Features - Pusher centrifuge Basket centrifugecheck Capacity52 l Basket sizesDia. 600 mm Max. loading weight65 kg Motor22 kW, 380 v Max. basket speed2000 rpm Max. temperature100°C Pusher centrifuges Pusher centrifugecheck Basket diameter600 mm Max. loading weight65 kg Motor14 kW, 380 V, 150 rpm, (Ex) Max. basket speed2000 rpm Mechanical operated pushercheck Motor2,2 kW, 380 V., 950 rpm, (Ex) MaterialStainless steel 1.4404 (316L) Information LocationBarneveld With switchgearcheck(as is) Floorspace1,30x3,60 m Total height2,70 m Weight4000 kg Extra SpecificationsCake volume 52 dm3, slurry density 1,25 kg/dm3, filter surface 0,45 m2 New ar ...

General SKU255X232 MakeCos.mec TypeG30 No.017/01 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Motor1.1 KW Width100 mm Specified Features - Sieve granulator Granulating sievecheck oscillating Rotor sizesDia. 100x330 mm Sieve sizesDia. 110x330 mm Sieve perforation0,5x0,5 mm InletDia. 200 mm, with pneumatic valve OutletDia. 200 mm, with pneumatic valve Motor1,10 kW (400 V, 1400 rpm) With variable speed drivecheck Speed324,6 rpm MaterialStainless steel 1.4306 (304L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,10x0,95 m Total height1,90 m Weight380 kg CEcheckNew arrivalsSieve granulatorsCosmecNew arrivalsSieves > Sieve granulatorsBrand > Cosmec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

General SKU404U1204 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 Ltr. Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket11 Ltr. Max. temperature-15/150 ºC With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.208.09.006-05 Year of construction2009 Floorspace0,75x0,75 mtr Total height1,40 mtr Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmetics ...

General SKU404U1205 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume167 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity167 Ltr. Vessel sizesdia. 500x868 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket18 Ltr. Max. temperature-15/150 °C With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm Information No.208.09.006.28 Year of construction2009 Floorspace0,75x0,75 m Total height1,5 m Weight310 kg Extra SpecificationsRa ≤ 0,6 µm Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosm ...

General SKU312X492 MakeALLGAIER PROCESS TECHNOLOGY GmbH LocationBarneveld CEcheck TypeWS-R-V-T-2.80-0.50-0.30 Main Features MaterialStainless steel Motor11 KW Surface2.8 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Continuous operation, pressure/suction mode Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)check (Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) Information No.380 Year of construction2013 Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m Extra Specifications Not suitable  ...

General SKU014G031 MakeMachinefabriek Vrieco Zelhem B.V. TypeS 70 RB-S Mach.No.52624 Year of construction1978 Pressure Working pressure0.2 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume7000 Ltr. Motor15 KW Specified Features - Conical mixer Conical mixercheck Capacity8700 Ltr (7000 ltr nett) Largest cone diameter2950 mm Cone height4300 mm Dished topcheck Manhole500 mm With stainless steel armcheck Top drivecheck Motor13,0/20,0 kW (380 V) Motor1,1/1,8 kW (380 V) Bottom bearing pintle bearingcheck With jacketcheck Max. temperature120 degC Outlet with sliding valvecheck MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace3,0 x 3,0 m Total height4,3 m Extra Specifications-- RECONDITIONED -- Catalysts & fillersFeed additivesPaper & otherDiscountOther pharmaceuticsSugarAnimal feedOther feedSolid pharmac ...

General SKU292T672 MakeVan Tongeren kennemer Mach.No.Z43752 Year of construction2015 Main Features Motor1.1 KW Length1900 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Tube-typecheck Diameter360 mm Length1900 mm Shaft diameter170 mm Pitch255 mm Inletdia. 175 mm (2x) Outletdia. 140 mm Motor1,1 kW 219-241/380-420 Volt With coverscheck Information LocationBarneveld Floorspace3,2x0,55 m Total height0,6 m CEcheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemic ...

General SKU043E201 MakeHüttlin Coating-Technik GmbH Steinen TypeButterfly HB-750 No.HUE-100794 Year of construction1994 Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Inlet diameter2070 mm Specified Features - Coating pan MaterialStainless steel 1.4301 (304) Coating installationFilm coating line (1x) Batch size200-600 KG Pan diameter2070mm Pan depth1560mm In-/Outletdia. 700mm Motor± 9,2 KW, 400 Volt With frequency controllercheck Pan speed± 1,5-15 Rpm With electric heatingcheck (210 KW) With fancheck (2x) Motor7,5 KW, 380 Volt + 15,0 KW, 400/690 Volt With air filtercheck (2x) DCE Unimaster, Type UMA-454 V With spraying armcheck With dosing pumpcheck make Walther Trowal Information LocationBarneveld With switchgearcheck Floorspace3,7x2,3 m Total height3,2 m Weight5000 kgDiscountCoating pansHuettlinDiscountCoating pans > Coating  ...

General SKU292T670 LocationBarneveld CEcheck MakeVan Tongeren kennemer BV Main Features Motor3 KW Length7000 mm Inlet diameter430 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) Horizontal conveyor screwcheck Tube-typecheck Diameter420 mm Length7000 mm Shaft diameter260 mm Pitch200 mm Inletdia. 430 mm Outletdia. 221 mm Max. temperature100 °C Motor3 kW 219-241/380-420 Volt (Ex) Height between in- and outlet5890 mm Information TypeZ43430 Mach.No.T4404 Year of construction2015 Floorspace0,7x8,9 m Total height0,9 m ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlas ...

General SKU053E227 MakeMixaco Maschinenbau Neuenrade TypeCM-1000 S No.22800 Year of construction1992 Mounted on framecheck Main Features MaterialStainless steel Volume800 Ltr. Motor37 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacitymax. 800 Ltr (useful capacity) Vessel sizesdia. 1450x1000mm (conical vessel) With covercheck Outletdia. 500mm With motor37,0 KW, 380/660 Volt With motor4,0 KW, 220/380 Volt tilting motor MaterialStainless steel Information LocationBarneveld With switchcheck Floorspace2,9x1,9 M Extra Specifications-- RECONDITIONED -- Technical specs Extra informationconical vesselDiscountReconditionedCold mixersMixacoDiscountReconditionedPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

General SKU345S802 MakeEnco Energie Componenten (AT) LocationBarneveld CEcheck Pressure Working pressure shell16 Bar Vacuum possible shellcheck Working pressure tubes16 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface13.5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Notified body(TuV) Heating surface13,5 m2 Tube capacity50 Ltr Number of tubes:73 Tube diameter20mm Tube length3000mm Wall thickness tubes1.5mm Max. temperature-15/150 degr.C. Shell capacity90 Ltr. Cover connections(2x) DN50 Information No.T7201/1 Year of construction2011 Floorspace3,1x0,5 < Total height0,5 M Weight350 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosm ...

General SKU316S544 MakeHosokawa Nauta LocationBarneveld TypeJ.P. K.T. Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor7.5 KW Specified Features - Conical mixer Conical mixercheck Double conecheck Capacity600 Ltr. Largest cone diameterdia. 1300 mm Cone height1560 mm Manholecheck(2x) With stainless steel armcheck Top drivecheck Motor7,5 kW 400/600 Volt Cantilevered screwcheck With jacketcheck Bottom dischargedia. 65 mm Suitable for liquid/pastecheck MaterialStainless steel Information No.unknown Year of construction1992 Mounted on legscheck Floor space2,5x1,3 M Total height3 M Weight1700 Kg Extra Specificationswith spare parts Feed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPlastic & polymersConical mixersOther chemicalStar ...

General SKU292T671 MakeVan Tongeren kennemer BV Mach.No.Z43721 / T4400 Year of construction2017 Main Features Motor1.1 KW Length5000 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Tube-typecheck Diameter380 mm Length5000 mm Between inlet and outlet4650 mm Shaft diameter160 mm Pitch245 mm Inletdia. 175 mm Outletdia. 180 mm Motor1,1 kW 219-241/380-420 Volt (Ex) With variable speed drivecheck (Ex) Screw speed27 rpm. (34 895 l/h) Information LocationBarneveld Floorspace6,5x0,7 m Total height0,7 m Weight700 kg CEcheck ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceu ...

General SKU035B246 LocationBarneveld MakeCosmit/CTI Monza No.0151 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume12465 Ltr. Motor90 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity12.465 Ltr. Vessel sizesDia. 2200 x 2400 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connections(10x) OutletDia. 100 mm Half coil jacketedcheck 460 Ltr. Max. temperature150°C With gate type stirrerequipped with scrapers (motor 30kW: 9 rpm Ex) With paddle stirrer/screw ribbon stirrer type DM-1250/300 (40 rpm) Motor90,0 kW (400 V, 1460 rpm) Stainless Steel Reactors MaterialStainless steel 1.4301 (304) Information Year of construction1996 Mounted on legscheck Floorspace2,8 x 2,8 m Total height7,0 m Weight7500 kg ATEX compatiblecheckCatalysts & fillersSolvents ...

General SKU362W1148 LocationBarneveld Main Features Motor1.1 KW Length3500 mm Inlet diameter150 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Vertical conveyor screwcheck Diameter150 mm Length3500 mm Between inlet and outlet2300 mm Shaft diameter55 mm Pitch90 mm InletDia. 150 mm Outlet200x180 mm Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed64 rpm With coverscheck Information MakeUnknown Year of constructionunknown Floorspace4,30x0,70 m Total height0,50 m Weight200 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIVertical screw conveyorsPlastic & rubberMinerals & inorganicPl ...

General SKU391T1170 MakeA. Smits constructies BV TypeSmimo-MI-100L No.010.00.01.001 Year of construction1999 Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cagecheck 2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Hammer Mills MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Information Mounted on framecheck LocationBarneveld With switchcheck With switchgearcheck Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgOther feedHammer MillsA.Smits constructiesIndustries > Food & Feed > Other feedMills > Hammer MillsBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a ...

General SKU362W983 MakeFas Förderanlage TypeA250 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor1.5 KW Length2500 mm Inlet diameter200 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4301 (304) Vertical conveyor screws Horizontal conveyor screwcheck Trough-typecheck Vertical conveyor screwcheck Trough-modelcheck Diameter250mm Length2500 Between inlet and outlet2100 mm Shaft diameter100 mm Pitch190 mm InletDia. 200 mm OutletDia. 200 mm With adjustable packing glandscheck Motor1,5 kW, 230/400 volt, 1405 rpm Screw speed80 rpm Conveying height± 2000 mm With coverscheck Information No.02/02/45 Mach.No.02/02/45 Year of construction2002 Floorspace3,90 x 0,60 m Total height0,70 m Weight390 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & met ...

General SKU201P110 LocationBarneveld MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity11000 Ltr (5000 Ltr nett capacity) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armwith mechanical seals Top drivecheck Motorscrew, 15,0 kW, 380 Volt (Ex) Motorarm, 1,35 Kw, 220/380 Volt (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100°C. Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information Mach.No.WK 109923A / WK 340369 Year of construction1988 Floorspace3,1x3,0 M Total height5,5 M Weight+/- 7000 KGCatalysts & fillersF ...

General SKU232U228 LocationBarneveld Main Features Motor0.37 KW Length4500 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter350 mm Length4500 mm Between inlet and outlet4400 mm Shaft diameter130 mm Pitch93 - 300 mm Inlet160x350 mm Outlet350x280 mm Motor0,37 kW 220-240/380-415 Volt Screw speed9,2 rpm Outlet height1430 mm Height between in- and outlet1030 mm Information Makeunknown: missing type plate Floorspace5,2x1,1 m Total height1,9 m Weight550 kg Extra SpecificationsCapacity: 4256 Ltr/hCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals  ...

General SKU026W131 MakeDrais TypeKT-400 Year of construction1991 Mounted on framecheck Main Features MaterialStainless steel Volume400 Ltr. Motor18.5 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Continuous mixercheck Capacity400 l. Trough sizesø 600 x 1450 mm Inlet250 x 300 mm Top connectionscheck 4x Inspection hatch400 x 370 mm Outlet290 x 250 mm With adjustable packing glandscheck Motor11,0 kW (380 V, 1450 rpm) Speed mixing shaft100 rpm With lump breakercheck Motor7,5 kW (380 V, 2780 rpm) Speed lumpbreaker2870 rpm MaterialStainless steel Information LocationBarneveld Floorspace2,8 x 1,5 m Total height1,7 m Weight1640 kgCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder turbo mixersSpicesOther chemicalSt ...

General SKU361W981 MakeLauda LocationBarneveld CEcheck TypeITH250/12KW Pressure Working pressure10 Bar Main Features Heating (medium)Electric Capacity15 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Electric heatingcheck Heating medium:Marlotherm LH Heating capacity12 kW, 400V Electric capacity15 kW, 400 volt Temperature-15/+200°C Tank capacity30 l. With pumpcheck With temperature controllercheck With controlcheck Information No.HKS15167 Mach.No.HKS15167 Year of construction2015 With switchgearcheck Floorspace0,64 x 1,1 m Total height1,78 m Weight360 kg Extra SpecificationsWith touchscreen control, Siemens, type Simatic hmiCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarTemperature co ...

General SKU418U1312 MakeGlatt LocationBarneveld CEcheck TypeLab-coater GC-300 Main Features MaterialStainless steel Motor4 KW Inlet diameter200 mm Specified Features - Coating pan Coating installationcheck Capacity2,5 Ltr . Batch size0,5-2 kg Pan diameter300 mm Pan depth300 mm Cylindrical width210 mm Conical width90 mm In-/OutletDia. 200 mm Motor0,10 kW, 200 Volt, 3000 rpm With frequency controllercheck Pan speed10-30 rpm With electric heatingcheck (capacity: 5 kW, max. temp.: 70°C) With fancheck (2x blowers) Capacity10-250 m³/h Motor0,36 kW 400 Volt, 2800 rpm & 4,0 kW, 400 Volt, 4670 rpm With air filtercheck With spraying armcheck MaterialStainless steel 1.4301 (304) Information No.100703 Year of construction2002 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,2x1,0 m Total height1.5 m Weight420 kgOther pharmaceuticsC ...

General SKU316W643 LocationBarneveld CEcheck MakeSB Schneckenbau GmbH Main Features Motor1.1 KW Length1634 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter270 mm Length1634 mm Between inlet and outlet1500 mm Shaft diameter85 mm Pitch200 mm Inletø 230 mm Outletø 290 mm Motor1.1 kW,(400 V, 1700 rpm) Screw speed40 rpm Height between in- and outlet500 mm With coverscheck Information TypeTSE 250/1634 Mach.No.04/3371 Year of construction2004 Floorspace2,60 x 0,40 m Total height0,90 m Weight320 kg Extra Specifications- opening for dust extraction/filter on top Catalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfec ...