leifeld co used for sale

filling valves: 40 capacity / hour ca.: 10000 capping heads: 8 working direction: right-left (CCW)

filling valves: 24 capacity / hour ca.: 4500 working direction: left-right filling system: vacuum filling Dim. L x W x H [m]: 1,8 x 2 x 2,4 Details: zentrale Höhenverstellung 1,80 Breit, 1,80 Tief, 2,50 Höhe

For filled products, Diaphragm: 4 pieces, Capacity: up to 100 strokes/min., Product diameter: max. 60 mm, Product temperature: -2 °C to +45 °C, Belt width: 440 mm, Belt length: 1920 mm, Belt speed: 3 - 15 m/min., Power: 3 x 400V, 50Hz, 20kW, Dimensions: 2030 x 1625 x 2281 mm, Weight: 2500 kg

Kawasaki RS05L Robot E-Controller with Cabin Control: E-Controller Number of axes: 6 Max. load capacity: 5 kg Max. working range: 902 mm Year of manufacture: 12/2012 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams, floppy disk drive for data backup In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Palletizing robot Kawasaki CP300L E-Controller Profibus Control: E-Controller Number of axes: 4 Max. load capacity: 300 kg Max. working range: 3255 mm Year of manufacture: 2/2015 Scope of delivery: robot, controller, cable, teachpanel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Hitbot S922 Cobot Collaborative Used for Testing Purposes Only Year of manufacture: 06/22 Number of axes: 6 Max. load capacity: 5 kg Max. working range: approx. 922 mm Scope of delivery: robot, controller, cable In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Collaborative Cobot Aubo-i5 Year of construction 06/2018 Was only used for test purposes Scope of delivery: 1) Robot Cobot Aubo i-5 Manipulator SerialNr. ABCE18061010IV4 Weight: 24 kg 2) Aubo i5 control box, model CB, Serial No. ABCE18061010IV4 Weight: 31 kg In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

KUKA KR200 comp Series 2000 robot with traversing axis, 4 meters long Control: KRC2ed05 Number of axes: 7 Max. load capacity: 200 kg Max. working range: 2400 mm Year of Make: 2009 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

900 mm wide Breyer sheet coextrusion line for PP/PS:, Refurbished in 2011., Complete automatic Material Feed System., 3 component Dosing Mixing Station, Main Extruder, diameter 120 mm L/D 32, 350 - 375 kg/ hr through-put., Coextruder diameter 90 mm L/D 32, 300 - 350 kg/ hr through-put., Combined Output approximately. 700 kg/ hr with PP, 6 x Zone Electrically heated fan cooled barrel., Both Extruders with Hydraulic Double Pot type screen changers with Hydraulic Power Pack., Both Extruders equipped with EXTREX Melt-Pumps, ABA Configuration Adapter, Breyer 900 mm wide Inclined flex lip sheet Die. Thickness Range 0.5 mm to 2 mm, 1200 mm wide Breyer 5-Roll Polished Chrome cooling stack, only three Polished Chrome Rolls installed with 670 mm, 400 mm, 400 mm dia. Rolls., Driven by individual Indramat Servo Motors, 2 x Extra Rolls available but not installed on the Stack, Roller Conveyor, 2 x Ru ...

General SKU219X100 MakeXplore TypeMicro 5 Mach.No.5-03-12 Year of constructionUnknown Sizes Screw diameter10 mm Main Features Motor0.55 KW Inlet diameter5 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter5-10 mm L/D10 Number of heating zones:6 Electric heatingcheck Air coolingcheck Water coolingcheck DC-motor550 watt, 208-240 volt Screw speed1-400 rpm Capacity5 ml MaterialChromed steel General LocationBarneveld With switchgearcheck Floorspace0,70x0,40 m Total height0,85 m Weight220 kg Extra SpecificationsScrew length 107 mm, volume 5,5 ml., (5 ml.), max barrel temperature 450°C, RKC SR mini touchscreen system, max vertical force 5 kN, pressure 200 barAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extruders-Industries > Chemical > AgrochemicalsIndustries > Chemical > Plasti ...

- 5 Printing units (letterpress) with magnetic cylinders, - 1 Flexo-Varnishing-Unit, - 6 UV drying (air-cooled), - Rotary die-cutting unit with a magnetic cylinder, - GAP Master, - BST POWER SCOPE 3000 Pro Mark Edition - Video system for print image inspection, The scope of delivery also includes a rear-side rotary die-cutting unit;, this can be fitted in place of the flexo varnishing unit., Web width max.: 340 mm, Web width min.: 120 mm, Track width max.: 340 mm, Maximum track width: 340 mm, Bag width min.: 120 mm

Atlas Copco A-66 CLL crawler drilling rig with center fifth wheel on crawler undercarriage, pump foaming agent, double clamp Ø 310 with hydraulic piston puller 20 ton, mast with useful stroke 12.00 m, torque 1300 kgm, 6 cyl Deutz diesel engine. 106 HP

Key data: 50 mm, 300 , 970

Used shelf Shelf : 300 x 970, 1900 pcs Frame : 300 x 1830. 330 pcs

A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement.

This 5-axis WALDRICH COBURG 17-10 FP NC/5 was manufactured in 1985 and lastly retrofitted in 2011. It features a maximum workpiece weight of 60 tons and a substantial table size of 2,500 mm by 5,000 mm. The machine is equipped with a Sinumerik 840 control system, ensuring precision in operations. If you are looking to get high-quality milling capabilities, consider the WALDRICH COBURG 17-10 FP NC/5 gantry milling machine we have for sale. Contact us for further details.

This 3-axis Fidia CORTINI HS 644 was manufactured in 2001. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine has a maximum linear axis speed of 30 m/min and a robust table size of 1000 x 500 mm with a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Fidia CORTINI HS 644 vertical machining centre. Contact us for further details.

General SKU062A298 MakeGlatt TypeGC-1000 No.100594 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor1.1 KW Inlet diameter500 mm Specified Features - Coating pan Coating pancheck Coating installation:Drum coater: (1x) Pan diameter1000 mm Pan depth800 mm In-/Outlet500 mm Motor1,1 KW, 380 Volt (Ex) With spraying armcheck MaterialStainless steel 1.4552 General Floorspace1,8 x 1,8 m Total height2,2 m Weight1500 kg ATEX designedcheckStarchCoating pansSugarConfectionerySolid pharmaceuticsNew arrivalsGlattIndustries > Food & Feed > StarchCoating pans > Coating pansIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsNew arrivalsBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippin ...

Inv. Num. : 9154 Type: 17-10 FP NC/5 Producer: Waldrich Coburg Created: 1985, GO 2011 Parameters: Operating system: Sinumerik 840 Table length: 5000 mm Table width: 2500 mm Max. workpiece weight: 60000 kg Weight: 125000 kg Coolant leaks out in the spindle area of the machine. GOs were carried out on the machine in 1997/2008/2011.

x-travel: 6500 mm y-travel: 1500 mm z-travel: 2000 mm control: HEIDENHAIN iTNC 530 HSCI total power requirement: kW weight of the machine ca.: 58 t dimensions of the machine ca.: 14,5x7 m The ANAYAK HVM-65 traveling column milling machine stands for high rigidity, precision and machining performance. Equipped with a Heidenhain iTNC530 HSCI control, this CNC milling machine is ideally suited for demanding heavy-duty machining applications. The proven traveling column design with a fixed distance between column and spindle axis ensures consistent accuracy across the entire working range. The cross movement is performed by the column, eliminating the need for a contoured foundation. The orthogonal milling head with 28/42 kW power output reaches speeds of up to 6,000 rpm and features a precise 0.02° x 0.02° indexing resolution. The rigid auxiliary table offers a large clamping surface of 7 ...

General SKU255T403 MakeManesty (UK) LocationBarneveld TypeAccela-Cota 10 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter280 mm Specified Features - Coating pan Coating pancheck Coating installationcheck Batch size15 kg Pan diameterdia. 610 mm Pan depth440 mm Cylindrical width280 mm In-/Outletdia. 280 mm Motor0.55 kW (400 V) Pan speed6 - 30 rpm MaterialStainless steel 1.4552 General No.1001N0 Year of constructionunknown With switchgear(as is) Floorspace0,8 x 1 m Total height1,8 m Weight550 kgStarchCoating pansSugarConfectionerySolid pharmaceuticsManestyIndustries > Food & Feed > StarchCoating pans > Coating pansIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

General SKU268N293 MakeManesty machines ltd TypeAccelacota 10 No.280188 Year of constructionca. 1986-1988 LocationBarneveld Main Features MaterialStainless steel Motor2 KW Inlet diameter600 mm Specified Features - Coating pan Coating pancheck Coating installation:Tablet coater: Batch size15 Kg Pan diameter610mm Pan depth± 450mm Cylindrical width± 220mm (screen) Motor0,5 KW With variable speed drivecheck Pan speed6 - 30 rpm With electric heating(external) With fancheck Capacity500 m3/h Motor0,25 kW (400 V) With spraying armcheck MaterialStainless steel 1.4552 General With switchgear(as is) Floorspace1,7x1,2 m Total height1,9 m Weight500 kg Extra Specifications- air heater includedStarchCoating pansSugarConfectionerySolid pharmaceuticsManestyIndustries > Food & Feed > StarchCoating pans > Coating pansIndustries > Food & Feed > SugarIndustries > Food & Fee ...

General SKUR1114 MakeManesty (UK) LocationBarneveld TypeAccela-Cota 10 Main Features MaterialStainless steel Inlet diameter600 mm Specified Features - Coating pan Coating pancheck Pan diameter610 mm Pan depth400 mm In-/Outletdia. 280 mm Motorcheck With fancheck Motor0.18 kW 220/380 Volt With spraying armcheck MaterialStainless steel 1.4552 General No.7 Q 178 Year of constructionunknown With switchcheck Floorspace1,8 x 1,3 m Total height2,1 m Weight930 kgStarchCoating pansSugarConfectionerySolid pharmaceuticsManestyIndustries > Food & Feed > StarchCoating pans > Coating pansIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...

Material Name: Coagulant Tank 1540mm(W) x 4600mm(L) x 700mm(H) Material Brand: Generic Model: Coagulant Tank Material Type: Tank Material Specification: 1540mm(W) x 4600mm(L) x 700mm(H) SS304-2B, 3mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

General SKU255X232 MakeCos.mec LocationBarneveld CEcheck TypeG30 Main Features MaterialStainless steel Motor1.1 KW Width100 mm Specified Features - Sieve granulator Granulating sieveoscillating Rotor sizesDia. 100x330 mm Sieve sizesDia. 110x330 mm Sieve perforation0,5x0,5 mm InletDia. 200 mm, with pneumatic valve OutletDia. 200 mm, with pneumatic valve Motor1,10 kW (400 V, 1400 rpm) With variable speed drivecheck Speed324,6 rpm MaterialStainless steel 1.4306 (304L) General No.017/01 Year of construction2000 Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,10x0,95 m Total height1,90 m Weight380 kgSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsNew arrivalsMinerals & inorganicPowdered foodsCosmecSi ...

Bread roll line König Classic Rex Combiline 800 This system is currently still being repaired (pictures are from the bakery) Suitable for the production of round, oval and die-cut rolls as well as other stamped rolls Year of Make: 2008 Dough divider and rounder, type: Classic Rex T6 Proofer, Type: Combiline 800 Weight range: 45-100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proofer Proofer with air conditioning (temperature, humidity) side discharge belt for further production (e.g.: downstream

WP Kemper Softstar Evolution Compact Bread Roll Maker Year of Make: 2013 Suitable for the production of round, elongated, cut or punched dough pieces (e.g. Berliners, cut rolls, after-work rolls, etc.) Max. hourly output (6 rows): approx. 12,000 pieces Weight range approx. 45-95g 6-row head machine with pre-portioner Blockable rows for e.g. 4-row production (sliced rolls) Touch control with program memory Incl. chamber drum for various weight ranges Proofer with air conditioning Long rolling unit with motorized upper belt  Punching unit incl.

Biscuit dosing machines Comas DLV 450 Year of Make: 2008 Condition: very good Siemens control system Working width: 450 mm

Bread roll line König Basic Rex II Combiline 600 Year of Make: 2008 Condition: Currently under maintenance, pictures before maintenance For the production of round, oval, punched, elongated and flat products from wheat dough, mixed Swiss dough, cereal or fine yeast dough Suitable for shaped buns, elongated buns, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Max. hourly output: 4,500 pieces (3 rows, for elongated pasta) Weight range: 35-85 g Dough divider and rounder, type Basic Rex II, 5 rows Long knitting board in front of proofer Proofer with

Atlas Copco GA11VSD+ screw compressor Inverter integrated 11 kW 13 bar 1.95 m3/min Year of Make: 2013 Hours: 20,453

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

The machine is in perfect condition

Maximum Spindle Speed 2800 RPM Brand Weiler Power Source Electric Control Type Conventional Machine Weight (kg) 800 Chamfer Triple Model/Type VS1 Year of Manufacture 1979

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cage2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Hammer Mills MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General TypeSmimo-MI-100L No.010.00.01.001 Year of construction1999 Mounted on framecheck With switchcheck With switchgear(as is) Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

Key data: 480 mm, 785 mm, 45 1/min

Control OKUMA ... OSP-P300LA Turning diameter... 480mm Turning length... 785mm Inclined bed Axis Y ... 115mm Sub-spindle Spindle bore ... 80mm Tool turret ... 12/12 Bar Feeder Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 45-5000 rpm. Speed of the driven tools ... 45-6000 rpm Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power ... 22kW L x W x H ... 3330 x 1800 x 2250 mm Machine weight ... 5250kg Chip conveyor

With belt washer and CIP system, Belt width: 400 mm, Tiers: 2 x 4 pc., Belt length: 44 m, Product gap: 130 mm, Retention time: 2.5 - 75 min, Temperature: max 200°C, Heating: thermal oil, 300kW, Exhaust: 2 x 2000 m³/h, Steam: NW40, 4 - 8 Bar, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 35kW, Dimensions: 8250 x 3150 x 4250 mm, Weight: 12000 kg

Belt width gross: 1060 mm, Belt width nett: 1015 mm, Tiers: 36 pcs., Product gap: 65 mm, Link height: 80 mm, Belt length: 738 m, Infeed height: 925 mm, Outfeed height: 4120 mm, Refrigerant: NH3/Ammonia, Cooling power: 640 kW, Evaporator: 4000 m2, Power: 3 x 400V, 50Hz, 92kW, Dimensions: 11020 x 8300 x 5100 mm

Tank capacity: 5l, melting capacity: 5kg/h, adhesive type: granules and blocks (thermoplastic), operating temperature: 20-200°C, heating-up time (160°C): approx. 30min, adhesive viscosity: 100-20,000mPas, heated hose connections: 1 to 4, filling: manual or automatic (RobaFeed 3), number of delivery pumps: 1, pump type: piston or gerotor pumps, supply voltage: 200-400V, 1-3 LNPE, connected load: 1.8kW, compressed air supply: 6bar, dry, oil-free, according to ISO 8573-1, class 4, electronics: CLS, operating panel: membrane keypad (TRM), integrated application control: Robatech ICS TRM 4, weight: 34kg, safety standard: CE, CSA. An on-site inspection is possible.

Fully reconditioned Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top slide and a bottom valve. Framework, lid and side covers are all made of stainless steel. The bowl is equipped with a single jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, temperature sensor in the product, 3x double cutting knives, max. working pressure in the bowl -1 / 0.3 bar (protected with pressure relief valve), maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x hydraulic inlet slider at the top for the main product, including large funnel, 1x outlet valve at the bottom for the outlet of the finished product, 1x connection for pneumatics controlled ingredient valves on the side of the ...

NR KATALOGOWY 7926 DANE TECHNICZNE - długość robocza 6200mm - szerokość robocza 150mm - wysokość robocza 1350mm - 12 pionowych siłowników hydraulicznych - wymiary dł/szer/wys 6580/1270/2350mm - waga około 4000kg ATUTY – stan bardzo dobry – prasa używana – niemalowana – przeznaczona do profesjonalnego użytku Cena netto: 69900 PLN Cena netto: 16643 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

ago congelo Chiller 130 -8 26 95 82 absorption chiller from 2015, was used as a chiller for a 372 KW CHP plant. unit with control, Ammonia 370 kg, water 290 kg, 16 bar, 680 KW recooling capacity Manufacturer: AGO AG Energie + Anlagen Model No.: ago congelo 130 -8 26 95 82 Serial Number: 62669 Heating capacity [KW]: 500 Cooling capacity summer [KW]: 180 Cooling capacity winter [KW]: 235 Recooling capacity [KW]: 680 Flow rate [m3/h]: 34,09 Type: Absorption Refrigeration System Refrigerant: ammonia, 370 kg Solvent: Water, 290 kg Pressure [bar]: 16 bar Year of Make: 2015 Weight [kg]: 5,000 Dimensions LxWxH [cm]: 5.35 x 2.55 x 3.50

General SKU089F487 MakeEMB Elektromotorenbau Birsfelden TypeDKF-10 No.447753 Year of constructionunknown LocationBarneveld Motor Motor power9 kiloWatt Main Features MaterialMild steel/Stainless steel Motor9 KW Inlet diameter95 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesdia. 95 mm With hopper(± dia. 370x600mm) InletDia. 95 mm Outlet170x40 mm Motor± 9 kW, 380/660 V, 2880 rpm Speed2880 rpm MaterialMild steel, Nickel alloy (201) 2.4068, stainless steel 1.4006 (AISI 410), Stainless steel 1.4552, Stainless steel 1.4301 (304) General With switchcheck Floorspace0,6x0,5 m Total height1,4 mOintmentsBiotechnologyColloid millsFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicGeneric medicinesPaints & coatingsOils & fatEmb BirsfeldenIndustries > Pharmaceutical > Oint ...

COTTON SPINNING SMALL OPEN END LINE – YOC – 2007 Composition: 1. Cotton Blow room – 1 set ( capacity 500-800 kgs/h cotton), composed of: - Blendomat – 36 m rails for 36 bales, 2 rollers bale plucker - Staend.Br – condenser - SP-EM – metal separator - CL-C3 - Cleanomat ( fine cleamer) - MX-1-10 – multimixer - SP-DX - Dustex 2. Flat cards model TC-03 - 3 sets ( 60-90 kgs/h /each)- with: - DFK chute feeds - 3 liker in ; 12 stat.flats front and 6 st.flats back - IDF – autolevellers - Automatic can changer – cans dia 1000x1200 mm 3. Drawing frames TD -03 - 2 sets ( prod. Speed 600-800 m/min) - Creel for 8 slivers/cans - Cans delivery – 450 x1000 mm 4. Rotor spinning machines AUTOCORO 360 of 168 rotors /each – 2 sets - Delivery – 6” cylindrical ( waxing) - Rotors – type BD ( cotton) ( S556-BD & G536-BD on second machine) - Combers – B 174 DN  ...

Belt width: 1100 mm, Grill length: 11000 mm, Heating: thermic oil, Cooking time: 3 - 50 min., Max. temperature: 250 degrees Celsius, Power: 25 kW, Dimensions: 12825 x 1740 x 2323 mm, Weight: 10000 kg

Belt width: 650 mm, Flip-over: 90 - 200 mm, Power: 3 x 400V, 50Hz, 0.5kW, Dimensions: 2100 x 1300 x 1450 mm

The Florin Mini Compact Dryer is a compact drying system for applications where residual moisture must be removed or products must be blown off specifically. The system was developed as an energy-efficient alternative to classic compressed-air blow-offs and operates without a compressed-air supply., Typical application areas are blowing off coded surfaces before labeling, removal of residual moisture after washing or filling processes, drying of closures, cap feeding, and ejection of empty bottles. The compact design allows the system to be integrated into existing production lines even in confined spaces., With a power consumption of up to 180 watts and an air flow rate of 52 m³/h, the Mini Compact Dryer offers an energy-efficient solution for numerous applications in the beverage, food, and packaging industries. The IP67 protection rating enables use in demanding production environmen ...

This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details.

Equipment: integrated Leica 16x/14B binocular microscope with 6.8 eyepieces, protective viewing window, digital panel, emergency stop button, key switch, status indicator LED displays, two integrated gas pressure gauges with brass connections and hoses. With Rofin Sinar laser, voltage: 230V, PE, frequency: 50Hz, max. current consumption: 16A, laser safety class: 4, the laser requires new flash lamps. An inspection on site is possible.

General SKU094Y625 MakeCondux TypeHR9/N3 No.92 Year of construction1988 LocationBarneveld Main Features MaterialStainless steel Motor13 KW Specified Features - Cutter Cutter:Slicer/chipper: (1x) Knife diameterdia. 900mm Inlet480x160mm, Outlet 700x250mm Motor± 13,0 KW MaterialStainless steel General Floorspace1,3x1,2 M Total height1,8 M Weight800RubberAgrochemicalsPlastic & polymersFeed additivesPaper & otherDiscountDetergent & surf.CosmeticsOrganicsCuttersFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberPowdered foodsConsumer wasteConduxIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > Recycling > Paper & otherDiscountIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Recycling > OrganicsMills > CuttersInd ...

For sale is a small complete filling line for vinegar or oil in plastic bottles. Currently, the line is at 0.75 ltr. cylinders and has a maximum output of 4,000 bottles/h. The entire plant consists of the machines listed below: 1. Bunker for empty plastic bottles, about 6m long, capacity: about 400-600 containers 2. Kamman bottle sorting system type K23F Machine ensures that the bottles to be filled are transported out of the machine vertically, with the mouth facing upwards Sorting capacity: approx. 3,000-6,000 pieces/h 3. Conveyor belts 4. Leicht vacuum filler, make Cobert type Olimpia20/95 With 20 filling stations Dimensions: LxWxH: 1,520x1,250x2,330 mm Possible bottle diameter: 55-120 mm Built in 1989 6. Inkjet encoder, make REA-JET, for applying the lot marking or best-before date coding to the filled and sealed bottle Year 2008 5. Capper for plastic c ...

General SKU160P705 MakePallmann TypePP 4 No.0668145 Year of construction1968 LocationBarneveld Main Features Motor22.5 KW Inlet diameter155 mm Width100 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorsimpeller &: co-rotating baffle plate Rotor sizeInner roter ø 396 mm: Outer roter 400 mm Grinding room sizeø 600 Inlet155 x 100 mm Motor15 kW + 7,5 kW, 380 V SpeedMax. 4100 rpm: Grinding disc 1450 rpm Fine Impact Mills MaterialMild steel General With switchgear(as is) Floorspace2,1 x 1,1 m Total height0,8 mStarchAgrochemicalsSpicesPlastic & polymersFine Impact MillsCatalysts & fillersFeed additivesDiscountDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicGeneric medicinesPowdered foodsPaints & coatingsConsumer  ...