126,702 used machines on RESALE, but how to find them? Machine Search
x-travel: 3.500 mm y-travel: 2.600 mm z-travel: 1.000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm distance between columns: 2.300 mm rapid motion - x-axis: 15.000 mm/min rapid traverse: Y,Z 12.000 m/min feed: 5.000 m/min tool taper: ISO 50 number of spindle speeds: 5.000 U/min/rpm milling head -swivable: UAGA 3.000 U/min 45 Grad spindle drive: 22 kW transmission ratio: 2 table weight: 15.000 Kg Tools changer: 30 fach/tools handwheel: HEIDENHAIN HR 410 air pressure: 6 bar total power requirement: 44 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m - Auto Indexing Head 2, 5º /2.5º - Automatic Support in the right side for Head UAGA - Direct Output Head. - Automatic Head Changer - Automatic tools changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 10 liter, 8 liter, 1
available 10l tangential mixer Description attached!
Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x1170x2300 mm Weight: 650 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 3500 kN, 70 mm
DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm
Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 720x1000x1900 mm Weight: 300 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filling and packaging line for spirits in glass bottles (0.2 L, 0.5 L, 0.7 L, 1.0 L bottles with PP31.5), Pos.1:, 1 piece vacuum filler Seitz Compakta incl. vacuum, Solomaschine with 15 filling valves, Direction of rotation: right-left, Year of manufacture: not specified, Very good condition, Pos.2:, 1 piece Alcoa aluminum screw cap, Solomaschine mit einem Verschließkopf, Direction of rotation: right-left, Year of manufacture: not specified, Very good condition, Pos.3:, 1 piece TLG cap setter and BEER, Shrink wrap machine – never in operation, Pos.4:, 1 piece bottle handling system including accumulation table, Good condition, Pos.5:, 1 piece labeling machine KOSME for self-adhesive labels, with four bottle disc for abdomen, chest and, Back label, Year of construction: 2007, Very good condition, Pos.6:, 1 piece carton sealing machine Brand: Strapex /Switzerland, Type: Locktape 50, Yea ...
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine ...
AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...
mit neuem Vakuum Transportband. With new vacumm transportbelt. - Producer Costa - Type S3 CTT 1350 - Year of construction 2003 - Max. part height 3 - 160 mm - 1. Unit - Length belt - Sanding roller ~ 70 Shore - Measure sanding belt 2620 x 1380 mm (1350) mm - 2. Unit - Length belt - Electronic sanding beam Costa, 42 Segmente, Raster 32 mm - Sanding belt speed infinitely adjustable - Measure sanding belt 2620 x 1380 mm (1350) mm - 3. Unit - Length belt - Electronic sanding beam Costa, 42 Segmente, Raster 32 mm - Sanding belt speed infinitely adjustable - Measure sanding belt 2620 x 1380 mm (1350) mm - Distance follower roller 32 mm - Width, segmented sandingbeam 32 mm - Operating side, right - Aggregate height adjustment - Vacuum transport belt - Total connection power 103 A / 48 kW - Voltage / HZ 400 / 50 - Commodity code 84659300
- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %
Photos are examples, not original photos. - Producer Venjakob - Type VEN SPRAY COMFORT - Year of construction 2005 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Dust removing system on infeed conveyor - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 6000 - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - Number of lacquer pumps 2 Stk. - Producer lacquer pump Kremlin - Supply air box - Switch cabinet built into the machine - Voltage / HZ 400 / 50 - Location, on stock
- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %
- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet
greates pass round over bed: 540 mm swing diameter over face slide: 370 mm centre distance: 3000 mm centre height: 270 mm turning dia. in gap: 815 mm bed width: 344 mm spindle bore: 88 mm spindle diameter in front bearing: 133 mm spindle taper: 11 D1 Camlock turning speed range: 18-1400 U/min turning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mm face feeds: 0,03-0,5 mm metric threading: 0,4-14 mm inch threading: 2-72 G/1 thread - module: 0,3-3,5 mm thread - DP: 8-60 Pitch tailstock quill diameter: 75 mm quill stroke: 230 mm taper of tail spindle: MK 5 slide valve travel: 280 mm upper head travel: 150 mm Overall size: ca. 4700 x 1100 x 1400 mm weight: ca. 3200 kg power capacity: 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rea ...
Article No.: 91256 // S. No.: 91228 Work Surface: 48,3 cm W x 34,3 cm H
Pester PEWO-collect packing table, electrical connection 220V/50Hz, drive motor 0.55 kW, working height approx. 930 mm, machine footprint approx. 1300 x 1300 mm (LxW), machine height approx. 1400 mm, machine net weight approx. 220 kg
Size: 0x0 Equipments: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth
Costarelli inclined Conveyor Belt, Sturdy and reliable construction, Dimensions 5.300 x 950 mm, adjustable height (now loading 500 - discharging 1.600 mm), 1,5 kw motor, PVC carpet with drive lugs, 800 mm pitch, 200 mm roller diameter, 650 mm sidewall height, Constructed in 2001, very good working conditions, working width: 950 mm wide x 5,3 mt.long, conditions: used, checked, type: inclined
Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...
Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...
Screw compressor GA132VSD Atlas Copco. 132 kW 8.5 bar 26.06 m3/min. Inverter integrated.
Deck Oven Miwe Condo CO 4.1208 - Manufacturer: Miwe - Model: Condo CO 4.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function -each floor individually 9.45 kW together 37.8kW Entire furnace with proofer 39.7 kW - with proofer Proofer 1.9kW - With exhaust hood - Can be moved on castors - Year of construction 2004
Key data: 30 , 16 , 4
Screw compressor Weight: approx. 750Kg Volume flow: 4.88 m³ Suction pressure: 1.0 bar Speed: 3000 1/min Motor power: 30 kW
Item condition: in working order Availability: from 31.12.2025 Location: near Hamelin Dismantling: by buyer Number of ovens: 1
Engine Brand: SCANIA, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: SAE 14 , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: NEE , Starter Voltage: 24 Volt , Rated Power: 640 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/scania-di16-90m-core/42359 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.670 kg, Type number: DI16.90M
The Corosys CCS DN50 is a carbonation and process plant used in beverage manufacturing plants. It injects CO₂ into fruit juices, lemonade and other carbonated beverages in a controlled manner and ensures the desired degree of carbonation. In addition, CIP (cleaning), steam and cooling connections enable integrated hygienic production and sterilization processes, allowing the production line to operate both efficiently and hygienically.
A vertical panel saw Striebig is available. Cutting length: 4600mm, cutting width: 2070mm, cutting thickness: 60mm, vertical cutting position spacing: 1000mm, saw blade diameter: 250mm, motor power: 3kW, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 5750mm/1500mm/2850mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.
Type: Flip-over conveyor 650 Serial number: E050970105101 Year of construction: 2016 Belt width: 650 mm Flip-over: 90 - 200 mm Power: 3 x 400V, 50Hz, 0.5kW Dimensions: 2100 x 1300 x 1450 mm
For logs / logs, the BBS750 machine is a loyal partner. The performance of the sawmill depends on the thickness of the planks and beams. However, the average volume throughput can be estimated at 1-1.5 cbm/h. The Bockbandsäge Bochsäge sawmill is used by forest farmers and other wood processors and is used as an entry-level saw. Technical data: - Weight: approx. 600 kg - Machine dimensions: width approx. 220cm - height approx. 170cm - Total length:600cm (in standard version but also extendable) - Cutting length: 480cm - Main motor power: 5.5kW - Power requirements:
Key data: 2500 kN, 579 g/PS, 60 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train
General SKU336X761 MakeBusch TypeCobra NX0650 A LZ1 Mach.No.CHM 121160... Year of construction2021 Pressure Working pressure0.0005 Bar Main Features MaterialMild steel/Stainless steel Volume650000 Ltr. Motor12.5 KW Specified Features - Vacuum pump MaterialMild steel, Stainless steel Pumpcheck Number of pumps:1 Capacity650 m3/h With motor12,5 kW, 400/690 volt, 2935 rpm Inletdia. 90 mm Outletdia. 90 mm Information Mounted on framecheck LocationBarneveld Floorspace1,70x0,95 m Total height0,85 m Weight700 kg CEcheck Extra SpecificationsSuction cap. 650 m3/h, water cooling, with filter : : : :Vacuum pumpsBuschPumps > Vacuum pumpsBrand > Busch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...
Key data: 600 kN, 94 g/PS, 30 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train
Ultrasonic cleaning system for anilox rollers and other parts. By means of a cleaning fluid and ultrasound, the rotating anilox roller is cleaned.
Blowing machine SIG Corpoplast type Blomax 20 capacity: approx. 30.000 bph year of manufacturing: 2002 min. bottle volume: 200 ml max. bottle volume: 3.000 ml max. bottle diameter: 126 mm max. bottle length: 350 mm min. bottle length: 107 mm incl. preform tipper incl. preform feeding system neck size: PCO 28 incl. spare part package
Offer 25496 Hydr.- Univ. - Two-station – sheet metal notching machine + hole punch Technical data: Station 1. Notching device - Cutting length up to 220 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Infinitely variable cutting angle adjustment by handwheel 30 - 140 ° - Pneumatic clamping - Locking stops left + right - Table support surface 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Station 2. Kanteinrichtung oder Lochstanzeinrichtung - Max. pressure capacity 200 kN - Working speed 0 to 10 mm/sec - Bending device up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive 400 V / 4 kW - E – Footswitch - Space requirement approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg
General Manufacturer: MEP Type: Cobra 352 NC 5.0 Year of Make: 2017 Control: Volution TS50 Cutting speed: 1,700 / 3,400 rpm Saw blade diameter: 350 mm Cutting performance Round tube: 120 mm Square tube: 105 / 100 mm Rectangular tube: 180×70 / 135×60 mm Solid material round: 50 mm Solid material square: 80 / 55 mm Solid material rectangular: 160×35 mm Dimensions and weight Dimensions: 1,750 mm x 2,360 mm x 1,700 mm Weight: approx. 600 kg Condition Condition: Used Functional: Tested and fully functional
General SKU268K299 MakeRomaco AG Fryma Koruma Rheinfelden TypeCoBall mill MS-50 No.75439/00 Year of construction2000 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume9.8 Ltr. Motor55 KW Specified Features - Sand mill Vertical sandmillAnnular gap bead mill (1x) Capacity9,8 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Max. temperature80 Degr. C. Motor55,0 KW, 400/690 Volt (Ex) Capacity150-1000 Ltr/Hr MaterialStainless steel Information With switchcheck Floorspace2,1x1,0 M Total height2,3 M ATEX compatiblecheckSand millsRomacoMills > Sand millsBrand > Romaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...
Included: 1 x Italgi Combimax Pasta Machine Extruder, Sheeter & Ravioli Unit (SN:286) 1 x TECO‑GS12PE Monobloc Refrigeration Unit 1 x Automatic Dough Roller (AP35-120) 1 x Teflon die 109 1 x Single Blade Cutter 1 x Dual Blade Cutter 1 x Stainless Steel Trolley With Wheels 4 x Combimax Rolling Pins 8 x Matfer Bourgeat 150103 Exoglass Plain Cutters (1 1/8-inch, 1 1/2-inch, 2-inch, 2 3/8-inch, 2 3/4-inch, 3 1/8-inch, 3 1/2-inch, 4-inch) 1 x Die Wrench 135-145 1 x 1/6 Gastro 162x176mm Key Features: Manufacturer: Italgi Model: Combimax Supplied With: TECO‑GS12PE Monobloc Refrigeration Unit Multi-function: Mixes, rolls, and extrudes fresh pasta Ideal for batch pasta production Professional-grade stainless steel build Reliable and compact design Easy disassembly for cleaning Made in Italy Production Capacity: Extruded pasta (short & long): 50–55 kg/h Ravi ...
Robot Coupe R10 VV food processor unit. It has an 11.5 L all-stainless steel mixing tank with handles. It is a single phase 230V machine had light use (making a chopped date and desiccated coconut mix) It’s in great condition and works perfectly, the blades are in perfect condition.
Brand: Collin Pilot & Lab Solutions Model: P300 Presse Year of construction: 1987 Plate dimensions: 296 x 296 mm Machine nr.: 6300 22 86 Connected load: 18 kW Dimensions (LxWxH): 1.150 x 530 x 1.750 mm Weight: 650 kG
used
Qty. 1 Second-hand CI Flexo Printing Machine Brand & Model: Carint Geared/gearless: Geared Built: 2000 No. of colours: 6 colours (6+0) Material to print: PE, PP, OPP, PET, Paper Printing width: 1250 mm Material width: 1280 mm Print repeat: 360 mm – 1040 mm Mechanical speed: Up to 300 m/min Un-winder and winder: Un-winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Pumps: 6 x pcs, Pneumatic pumps Drying system: Electrical drying
A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible.
Type: CookStar CKH400/8/130 Serial number: 138 Year of construction: 1994/2002 Belt width: 400 mm Tiers: 2 x 4 pc. Belt length: 44 m Product gap: 130 mm Retention time: 2.5 - 75 min Temperature: max 200°C Heating: thermal oil, 300kW Exhaust: 2 x 2000 m³/h Steam: NW40, 4 - 8 Bar Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 35kW Dimensions: 8250 x 3150 x 4250 mm Weight: 12000 kg With belt washer and CIP system
maximum number of results exceeded
please refine your search
