leifeld co used for sale

Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 720x1000x1900 mm Weight: 300 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 540 mm swing diameter over face slide: 370 mm centre distance: 3000 mm centre height: 270 mm turning dia. in gap: 815 mm bed width: 344 mm spindle bore: 88 mm spindle diameter in front bearing: 133 mm spindle taper: 11 D1 Camlock turning speed range: 18-1400 U/min turning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mm face feeds: 0,03-0,5 mm metric threading: 0,4-14 mm inch threading: 2-72 G/1 thread - module: 0,3-3,5 mm thread - DP: 8-60 Pitch tailstock quill diameter: 75 mm quill stroke: 230 mm taper of tail spindle: MK 5 slide valve travel: 280 mm upper head travel: 150 mm Overall size: ca. 4700 x 1100 x 1400 mm weight: ca. 3200 kg power capacity: 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rea ...

Article No.: 91256 // S. No.: 91228 Work Surface: 48,3 cm W x 34,3 cm H

Pester PEWO-collect packing table, electrical connection 220V/50Hz, drive motor 0.55 kW, working height approx. 930 mm, machine footprint approx. 1300 x 1300 mm (LxW), machine height approx. 1400 mm, machine net weight approx. 220 kg

Costarelli inclined Conveyor Belt, Sturdy and reliable construction, Dimensions 5.300 x 950 mm, adjustable height (now loading 500 - discharging 1.600 mm), 1,5 kw motor, PVC carpet with drive lugs, 800 mm pitch, 200 mm roller diameter, 650 mm sidewall height, Constructed in 2001, very good working conditions, working width: 950 mm wide x 5,3 mt.long, conditions: used, checked, type: inclined

Size: 0x0 Equipments: Corner cutter, manual

Size: 0x0 Equipments: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Size: 0x0 Equipments: Corner cutter

Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...

Screw compressor GA132VSD Atlas Copco. 132 kW 8.5 bar 26.06 m3/min. Inverter integrated.

Deck Oven Miwe Condo CO 4.1208 - Manufacturer: Miwe - Model: Condo CO 4.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function -each floor individually 9.45 kW together 37.8kW Entire furnace with proofer 39.7 kW - with proofer Proofer 1.9kW - With exhaust hood - Can be moved on castors - Year of construction 2004

Key data: 30 , 16 , 4

Screw compressor Weight: approx. 750Kg Volume flow: 4.88 m³ Suction pressure: 1.0 bar Speed: 3000 1/min Motor power: 30 kW

The Corosys CCS DN50 is a carbonation and process plant used in beverage manufacturing plants. It injects CO₂ into fruit juices, lemonade and other carbonated beverages in a controlled manner and ensures the desired degree of carbonation. In addition, CIP (cleaning), steam and cooling connections enable integrated hygienic production and sterilization processes, allowing the production line to operate both efficiently and hygienically.

Engine Brand: SCANIA, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: SAE 14 , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: NEE , Starter Voltage: 24 Volt , Rated Power: 640 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/scania-di16-90m-core/42359 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.670 kg, Type number: DI16.90M

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train

General SKU336X761 LocationBarneveld CEcheck MakeBusch Pressure Working pressure0.0005 Bar Main Features MaterialMild steel/Stainless steel Volume650000 Ltr. Motor12.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity650 m3/h With motor12,5 kW, 400/690 volt, 2935 rpm Inletdia. 90 mm Outletdia. 90 mm MaterialMild steel, Stainless steel General TypeCobra NX0650 A LZ1 Mach.No.CHM 121160... Year of construction2021 Mounted on framecheck Floorspace1,70x0,95 m Total height0,85 m Weight700 kg Extra SpecificationsSuction cap. 650 m3/h, water cooling, with filter&:nbsp:&:nbsp:&:nbsp:&:nbsp:Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalVacuum pumpsFood additivesSugarLubricants & oleoD ...

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

Ultrasonic cleaning system for anilox rollers and other parts. By means of a cleaning fluid and ultrasound, the rotating anilox roller is cleaned.

Blowing machine SIG Corpoplast type Blomax 20 capacity: approx. 30.000 bph year of manufacturing: 2002 min. bottle volume: 200 ml max. bottle volume: 3.000 ml max. bottle diameter: 126 mm max. bottle length: 350 mm min. bottle length: 107 mm incl. preform tipper incl. preform feeding system neck size: PCO 28 incl. spare part package

General SKU268K299 MakeRomaco AG Fryma Koruma Rheinfelden TypeCoBall mill MS-50 No.75439/00 Year of construction2000 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume9.8 Ltr. Motor55 KW Specified Features - Sand mill Vertical sandmill:Annular gap bead mill: (1x) Capacity9,8 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Max. temperature80 Degr. C. Motor55,0 KW, 400/690 Volt (Ex) Capacity150-1000 Ltr/Hr MaterialStainless steel With jacketcheck General With switchcheck Floorspace2,1x1,0 M Total height2,3 M Weight750 ATEX designedcheckStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsPaints & coatingsRomacoIndustries > Food & Feed > StarchIndustries > Chem ...

Included: 1 x Italgi Combimax Pasta Machine Extruder, Sheeter & Ravioli Unit (SN:286) 1 x TECO‑GS12PE Monobloc Refrigeration Unit 1 x Automatic Dough Roller (AP35-120) 1 x Teflon die 109 1 x Single Blade Cutter 1 x Dual Blade Cutter 1 x Stainless Steel Trolley With Wheels 4 x Combimax Rolling Pins 8 x Matfer Bourgeat 150103 Exoglass Plain Cutters (1 1/8-inch, 1 1/2-inch, 2-inch, 2 3/8-inch, 2 3/4-inch, 3 1/8-inch, 3 1/2-inch, 4-inch) 1 x Die Wrench 135-145 1 x 1/6 Gastro 162x176mm Key Features: Manufacturer: Italgi Model: Combimax Supplied With: TECO‑GS12PE Monobloc Refrigeration Unit Multi-function: Mixes, rolls, and extrudes fresh pasta Ideal for batch pasta production Professional-grade stainless steel build Reliable and compact design Easy disassembly for cleaning Made in Italy Production Capacity: Extruded pasta (short & long): 50–55 kg/h Ravi ...

General SKU441W1456 LocationBarneveld CEcheck MakeTool-temp Main Features Heating (medium)Electric Capacity24 KW Temp.140 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Temperature+140°C With pumpcheck Capacity110 l/min Motor1,8 kW, 380 volt With temperature controllercheck General TypeTT-138 N-B4 Mach.No.321-3416-4 Year of construction2021 Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,240x0,480 m Total height1,40 m Weight220 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubbe ...

Robot Coupe R10 VV food processor unit. It has an 11.5 L all-stainless steel mixing tank with handles. It is a single phase 230V machine had light use (making a chopped date and desiccated coconut mix) It’s in great condition and works perfectly, the blades are in perfect condition.

Qty. 1 Second-hand CI Flexo Printing Machine Brand & Model: Carint Geared/gearless: Geared Built: 2000 No. of colours: 6 colours (6+0) Material to print: PE, PP, OPP, PET, Paper Printing width: 1250 mm Material width: 1280 mm Print repeat: 360 mm – 1040 mm Mechanical speed: Up to 300 m/min Un-winder and winder: Un-winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Pumps: 6 x pcs, Pneumatic pumps Drying system: Electrical drying

General SKU213X072 LocationBarneveld MakeHosokawa Nautamix NV Haarlem (NL) Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Conical mixer Conical mixercheck Capacity300 l. Largest cone diameter1200 mm Cone height1600 mm Dished topcheck Top drivecheck Motor1,5 kW, 230/400 volt, 1459 rpm Motorca. 0,4 kW Cantilevered screwcheck With jacketcheck Bottom dischargeDia. 270 mm MaterialStainless steel 1.4301 (304) With jacketcheck General TypeDBX-300 No.M18123 With switchgearcheck Floor space1,40x1,40 m Total height2,40 m Weight800 kgStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsConical mixersMinerals & inorganicTea, herbs & coffeeGeneric medicinesPowdered foodsHosokawa ...

General SKU336X765 LocationBarneveld CEcheck MakeBusch Pressure Working pressure0.0005 Bar Main Features MaterialMild steel/Stainless steel Volume650000 Ltr. Motor12.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity650 m3/h With motor12,5 kW, 400/690 volt, 2935 rpm Inletdia. 90 mm Outletdia. 90 mm MaterialMild steel, Stainless steel General TypeCobra NX0650 A LZ1 Mach.No.CHM 121160 Year of construction2021 Mounted on framecheck Floorspace1,70x0,95 m Total height0,85 m Weight700 kg Extra SpecificationsSuction cap. 650 m3/h, water cooling, with filterFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalVacuum pumpsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfe ...

General SKU321W1336 MakeBrabender LocationBarneveld CEcheck Type8150.0 1 Main Features Motor3.1 KW Inlet diameter30 mm L/D25 Specified Features - Viscosity test machine Single screw extrudercheck Screw diameter19 mm L/D25 D Number of heating zones:4 Electric heatingcheck Water cooling1 zone DC-motor3,1 kW, 400/460 volt Screw speed0,2-150 rpm Inlet30 mm Feeding with hopper230x460x670 mm Number of temperature controllers:6 Max. temperature450°C Viscosity test machines MaterialStainless steel General No.971288 Year of construction1998 With switchgearcheck Sizes switchgear0,65x0,51x0,33 m Floorspace1,80x0,55 m Total height0,58 m Weight280 kgRubberPlastic & polymersFeed additivesFood additivesOintmentsViscosity test machinesBrabenderIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > Fo ...

General SKU426U1359 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume150 Ltr. Motor11 KW Specified Features - Universal mixer Universal mixercheck Capacity150 Ltr. Vessel sizesDia. 700x450 mm With covercheck InletDia. 80 mm Pneumatic operated outletcheck OutletDia. 200 mm With motor7,5/11 kW, 380 volt With lump breakercheck With motor3/4 kW, 380 volt Rotor speed2840/1430 rpm MaterialStainless steel General TypeGral 150 Mach.No.84MG15031 Year of constructionunknown With switchgearcheck Floorspace2,60x1,00 m Total height2,20 mCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicUniversal mixersGeneric medicinesPowdered foodsPaints & coatingsColletteIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergen ...

General SKU300U597 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume75 Ltr. Motor7.5 KW Specified Features - Universal mixer Universal mixercheck Capacitybruto 75 Ltr. (netto 50 Ltr.) Vessel sizesDia. 520x350 mm With covercheck InletDia. 50 mm, 20 mm Pneumatic operated outletcheck OutletDia. 130 mm With motor7,5 kW, 380 Volt, 1440 rpm Rotor speed203/306 rpm With lump breakercheck With motor2,2-3,3 kW Rotor speed1500/3000 rpm MaterialStainless steel 1.4306 (304L) General TypeGral-75 Mach.No.90M67561 Year of construction1989 Mounted on framecheck With switchgear(as is) Floorspace2,2x0,90 m Total height2,2 m Weight1680 kg Extra SpecificationsThe stainless steel contact surfaces in the machine are polished.The machine is supplied with:- Extra agitator equipped with scrapers.- Extra pan with transport cart.- Separate transport cart.Cat ...

General SKU244X191 MakeKöllemann LocationBarneveld CEcheck TypeDT KSF 2XDN300 5500 lg Pressure Working pressure jacket3 Bar Technical specs Max. temperature550 °C Main Features MaterialMild steel Motor1.1 KW Length5500 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter2x 300 mm Length5500 mm Between inlet and outlet4950mm Shaft diameter140mm Pitch150mm InletDia. 200 and 350 mm Outlet400x150 mm With jacketcheck Max. temperature35°C Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed2,0 rpm MaterialMild steel With jacketcheck General No.0603120/2081250/01 Mach.No.0603120/2081250/01 Year of construction2006 Floorspace8,0x1,10 m Total height2,0 m Weight2800kg Extra Specificationsthe screw is coolableStarchRubberAgrochemicalsSpicesPlastic & polymersCata ...

General SKU302N426 MakeBrabender OHG Duisburg TypePlasticorder PLE 330 No.183518 Mounted on framecheck Main Features Volume0.03 Ltr. Motor2.3 KW Specified Features - Viscosity test machine Viscosity meter:Torque Rheometer: Motor3,3 KW, 220 Volt Variable speedcheck Speed10-250 rpm Analogue metercheck With recordercheck Type:Servogor 320: With kneadercheck TypeW 30 H, with pneumatic feeder No.181510 Electric heatingcheck Capacity0,03 Ltr General LocationBarneveld With switchgearcheck Floorspace1.5x0.6 M Total height1.2 M Weight600 KGRubberPlastic & polymersFeed additivesFood additivesOintmentsViscosity test machinesBrabenderIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Pharmaceutical > OintmentsPlastic machinery > Viscosity test machinesBrand  ...

Manufacturer: Wagner Type of machine : Powder Coating System Year of Manufacture: 2000 The powder system consists of the following individual components: - 1x Powder coating booth – FBC – plastic booth with discharge conveyor - Cabin extraction system – 1x monocyclone 1x closed post-filter - 2x powder collection containers - 1x Powder Center - PZ - 2008 with its own extraction system - 8x Automatic Powder Guns – PEA – T2 - 2x hand powder guns – PEM – T2 - Control unit for automatic pistols – 8x PM 401 pneumatic module 1x PG 650 control module - 2x Control for handguns – EPG – 2007 in Tribo mode - 2x lifting devices – EBA – 3 - 2x electric sliding unit – VT – 1400 - Light strips – height + gap + depth - 1x external safety device – fire detection (Minimax company) - Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU332X712 MakeJulius Montz LocationBarneveld CEcheck TypeDN900/FS-K004 Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume1950 Ltr. Specified Features - Distillation Distillation installationcheck Column sizesø 900 mm x 3700 mm MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General No.214-0163-03 Year of construction2014 Floorspace1,40x1,40 m Total height3,70 m Weight1060 kg Extra Specifications- packing material: 9 units A3-500 (MoC 1.4404/1.4571)-&:nbsp:with expansion jointFine chemicalsOther chemicalSolventsDetergent & surf.Other pharmaceuticsDistillationLubricants & oleoBeveragesAPIOils & fatJulius Montz GmbH HildenIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceu ...

General SKU330W710 LocationBarneveld CEcheck MakeGEA Collette N.V. Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor37 KW Specified Features - Universal mixer Gral-granulatorcheck CapacityGross 600l, net 300-400l, 600kg Vessel sizesDia. 1100 x 700 mm With covercheck InletDia, 100mm, 45 mm, 30 mm Pneumatic operated outletcheck OutletDia. 250mm With jacketcheck With motor37kW (400/690 V, 1480 rpm) With variable speed driveFrequency controller With lump breakercheck With motor15kW (400/690 V, 2900 rpm) MaterialStainless steel 1.4401 (316) With jacketcheck General Typeultimagral 600 Mach.No.06G0600036 Year of construction2006 Mounted on framecheck With switchgear(as is) Extra Specificationsscope of this machine:- Collette Ultimate Gral 600.- system for cleaning (CIP) with 2x Milton pumps.- vacuum pump, Busch, typ ...

Available immediately from operational European factory. Equipment professionally maintained and in excellent technical condition. FLAT KNITTING MACHINES - Steiger Antares 3.130SC Freegauge, E14 (E7/E14), Switzerland Quantity: 1 unit Year: 2019 - Steiger Antares 3.130 SC, E14, Switzerland Quantity: 5 units Year: 2019 - Steiger Antares 3.130 SC Fully Fashion, E16, Switzerland Quantity: 1 unit Year: 2019 - Stoll ADF 530-32 Multi Gauge Quantity: 1 unit Year: 2018 SOFTWARE Programming Software Model+ by Steiger, Switzerland Quantity: 1 unit Year: 2019 LINKING MACHINES - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2019 - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2018 - Exacta Ultravision Stoptronic Italy E22 Quantity: 4 units Year: 2019 SEWING MACHINES - Exacta Cupseamer Quantity: 1 unit Year: 2019 - Durkopp Adler 281-140342-03, Single Needle  ...

• For single and multiple containers with straight infeed • Running from left to right • For PP films • Output max. 22 containers/min. • Infeed width 100-200 mm • Infeed length 50-350 mm • Infeed height 30\endash150 mm • Erecting device for 90° rotation of folding cartons • Stacking station • Automatic film change from working roll to storage roll using film splicer • Camera/track & trace system for serialisation and aggregation with PLM direct software • ZEBRA ZE500 label printer with label applicator and PCE camera • Handheld scanner • Schneider Electronics PacDrive LMC/Lexium LXM62 P/LXM 62 D control system • 15.6 HMI with tangius 4.0 visualisation software • User management • Format management • Audit trail • Ethernet connection • Folding box formats used Infeed (a x b x h) 55 x 26 x 110/160/185 mm • Container dimensions used (IW x IL x IH) 1 ...

Height 2700 mm Width 2400 mm Length 3200 mm Capacity 2000 l Electrical Supply: 400V 50Hz 3N Total power 75 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 250 mm Wolf type Straight wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant Description The wolf-mixer has an infrared MultiTrack analyzer. It analyzes the fat, protein and water content of meat. Approximate accuracy: approx. 2%.

Band saw CENTAURO mod. CO700 - CE rules - CE rules - Year 2014

Orbital sander COMEC mod. LC20AV - CE rules - Adjustable feeding speed - Min/max. working diam. 30/150 mm. - Min. bending radius 200 mm. - Complete with feeding units - Year 2006

General SKU312W1494 LocationBarneveld CEcheck MakeAnlagenbau Stampfer GmbH Main Features Motor2.2 KW Length11466 mm Width1637 mm Specified Features - Conveyor belt Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 11,466 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) General TypeAS-WRB-1000 Mach.No.144.0001 Year of construction2014 Floorspace11,4x1,6 m Total height1,0 m Weight5500 kg Extra Specificationsbelt rolls HDPEStarchRubberAgrochemicalsSpicesPaper & otherConveyor beltsOrganicsE-waste & metalAnimal feedOther feedPlastic & rubberConsumer wasteStampfer HaanIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Recycling > Paper & otherConveying systems > Conveyor beltsIndu ...

Pall Supradisc Filter - Secondhand, Unused Item: Manufacturer: Pall Corporation Type: SUPRADISC Model: WSFZ161 (038.161.1) Year of Manufacture: 2021 Made in Germany This is a secondhand item that remains completely unused since purchase in 2021. All components are present and correct. (Offered in "As-is" condition) This is a SECOND HAND ITEM and is sold as is For more information and more available stock please visit us at - advancedbrewing.co.uk

4 spindles moulder SCM mod. COMPACT 23K Composition: - 1st bottom horizontal spindle - 2nd vertical spindle right - 3rd vertical spindle left - 4th horizontal top - Working width mm. 230 mm. - Infeed table 2000 mm. - Year 2000 - CE rules

Double sided cutting saw COMEC mod. TD1200 - CE rules - N. 2 motors 2 hp - N. 2 blades diam. 350 mm - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Volt. 380/50 - S/N 961228 - Year 1996

General SKU334T899 MakeFriedhelm Stechel GmbH LocationBarneveld CEcheck TypeADE120-100 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter748 mm Specified Features - Coating pan Coating pancheck Capacity150 Ltr. Batch sizemax. 130 kg Pan diameter1200 mm Pan depth620 mm In-/Outlet748 mm Motor1,5 kW 230/400 Volt Pan speed19 rpm MaterialStainless steel 1.4301 (304) General No.D20909 Year of construction2009 Mounted on framecheck Floorspace2,5x1,8 m Total height2,3 mStarchSugarCoating pansConfectionerySolid pharmaceuticsFriedhelm StechelIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarCoating pans > Coating pansIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

This SPINNER TC46-COMPACT was manufactured in 1999. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their turning capabilities. Contact us for more information.

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015.

This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information.