leifeld co used for sale

Manufacturer: Year of Manufacture: Model: WN29/ WPC-ELT-001-0248 Type of Machine: 400 Ton Hydraulic Press - Press Model: 225.400 - Weight (Net): 75,000 Kg - Maximum Force: 4000 KN - Nominal Distance from Bottom Dead Center: 12 mm - Normal Stop Position of Crankshaft: Top Dead Center Tooling and Capacity: - Maximum Tool Dimensions (Height x Width x Depth): 700 x 2500 x 160 mm - Maximum Weight of Upper Tools: 7000 Kg - Maximum Permissible Flywheel Speed: 489 RPM Operational Parameters: - Continuous Stroke Rate (Min/Max): 12 - 30 Strokes/Min - Maximum Clutch Engagements per Minute: 20 Strokes/Min - Maximum Effective Clutch Engagements per Minute: 10 Strokes/Min - Stroke Range (Min/Max): 200 mm - Slider Adjustment Stroke: 300 mm - Maximum Tool Speed (Adjustable Stroke): 700 mm Power and Pneumatics: - Electrical Supply (Voltage/Frequency): 400V / 50Hz - Installed Electrical Power: 4 ...

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

x-travel: 6000 mm y-travel: 3500 mm z-travel: 1500 mm total power requirement: kW weight of the machine ca.: 161 t dimensions of the machine ca.: m x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm CNC control 840 D Table load 12 t Table dimensions - lengthways 5000 mm Table dimensions - crossways 2500 mm ATC tool changing device 200-pos. Tool weight max. 30 kg Tool holder HSK A 100 Tool diameter 250 mm Tool length - max. 500 mm Spindle speed: 5 - 6000 rpm C-axis -10 to 370 deg B-axis 5 to -95 deg Column distance 3000 mm Machine weight approx. 161 t Space requirement approx. 20.5 x 11 x 6.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1168 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

SPECIFICATIONS: Machining length: max. 3000 mm - min. 250 mm Processing thickness: min. 30 - max. 155 mm Processing width: max. 200 mm Tenon cutting area 01 Tenon cutting unit - max. Ø 400 mm - 3 kW 01 Spigot cutter - length 600 mm - 7.5 kW - shank Ø 50 mm - 3100 rpm 01 Electronic guidance Roll forming area: I Roll forming unit - length 600 - 7.5 kW - shank Ø 50 mm - 6000 rpm II Roll forming unit - length 600 mm - 7.5 kW - shank Ø 50 mm - 6000 rpm 01 Glazing bead unit - Ø 200 mm - 2.2 kW 01 Rubber roller drive unit

Control Cabinet for Tetra Pak Conveyor Systems Industrial control cabinet designed for operating and controlling Tetra Pak conveyor systems in beverage and packaging lines. The cabinet is equipped with reliable automation components, ensuring stable and efficient conveyor operation. General Information - Application: Control system for Tetra Pak conveyor lines - Condition: Used Installed Components Control System - PLC: Siemens PLC Electrical Components - Circuit Breakers: Schneider Electric Drives - Frequency Drives: 4 × Danfoss frequency drives Sensors - Detection Switches: 8 × SICK detection switches Key Advantages - Designed for Tetra Pak conveyor system control - Equipped with Siemens PLC automation - Reliable Schneider Electric electrical protection components - Includes Danfoss frequency drives for motor speed control - SICK detection switches  ...

grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW The data for this ad was created with ModulMWS - the  ...

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: 7 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m Year of construction approx. 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AKR-KNOCK CONTROL RS - 12404594

AKR-KNOCK CONTROL RS - 12473957

AKR-KNOCK CONTROL RS - 12473965

Description : Corazza FB 230 butter portion Packer for 7-20g butter hotel size portions. The Corazza FB 230 is capable for forming, filling and wrapping the portions ending up in the collator (Box Packer ) ie. 7g in 200 pcs per box. The machine has been under full rewiring and refurbishment with full strip down. The product feed has twin screw motor driver augers . Paper feed is direct from reel with photo mark sensors. Main parts of filling and product parts are stainless steel . Vacuum pump proving the vacuum for the paper handling and pocket vacuums. Technical Description Make : Corazza Model : FB 230 Filling Volume : 7-20g Cell Dimensions: 30 x 45 mm Speed :0 - 220 pcs per minute Height Adjustment : 7 mm to 18 mm Paper Forming : Single reel that is cut in two parts Product Feed : Hopper Photocell : Paper correction Unit Box Packing : 200 pcs per box ( ...

Automatic capsule filling machine for dosing liquids into hard gelatin capsules. Incl. liquid dosing unit and feeding unit for capsule-in-capsule applications. The system is in containment version and equipped with capsule formats for sizes 0 and 00. PLC: B&R APC 3100. Output: Liquid in capsules: up to 14,760 pcs/h, Capsule-in-capsule: up to 12,600 pcs/h

Göpfert Ovation HBL 16/24 6 colours flexo printer for corrugated board – complete line Very nice 6 colours flexo printing line with prefeeder and stacker Sheet size max.: 1.530 x 2400 mm / 60.25" x 94.25" Sheet size min.: 460 x 600 mm / 18" x 24" Print area.: 1,520 x 2400 mm / 60" x 95" Corrugated board thickness: Max.: 1.0 – 9.0 mm – 0.039" – 0.354" Mechanical Speed: 10.000 sheets/hour Machine is in production in western Europe Can be tested Please contact PP Machinery Team

Bobst Flexo 200 5 colours flexo printing machine for corrugated board 5 flexo printing units Prefeeder Automatic Delivery Machine is in a very good condition Available immediately Location: Western Europe Manufacturer: Bobst SA Switzerland Type: Flexo 200 Year of manufacturing: 1988 Max. Sheet size: 1270 x 2032 mm Min Sheet size: min. 600 x 520 mm Max. printing area: max. 2032 x 1270 mm Material thickness max. : 9 mm

Key data: 2400 KW, 400 V

Diesel Generators 4 x 2400 kW / 50Hz Containerized CAT C175-16 Gensets Never operated, new like condition, containerized diesel generators made in year 2016 and 2017. Generating sets have modern, low fuel consumption optimized CAT C175-16 diesel engines running in 1500 rpm and having standby electric capacity of 2400kW and 2000kW in continues operation. Units include all necessary auxiliaries for full operation. Technical characteristics Manufacturer: Caterpillar USA Diesel Engines: CAT C175-16 Manufacturing year: 2016 and 2017 Operating hours: Zero (New condition) Number of units: 4 pcs Output – Stand-by: 2400kW / 400V / 50 Hz Output – Continuous duty: 2000kW / 400V / 50Hz Fuel: Diesel oil Control system: EMCP 4 Control Panels Container dimensions: 16 x 4.1 x 4.1 m (L x W x H) Container weight: 56’000 kg

Sell some of our machines from our warehouse

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

Manufacturer: COMUNA-Metall Year of Manufacture: 2008 Gas type: Category 12HL Connection pressure: 20-50 mbar Nominal power range: 150/195 kW Voltage: 230/400V, 3-phase, 50Hz Fuse: NH 00, 100A Permissible operating pressure: 6 bar Thermal power: 100 kW Electrical power: 50 kW Protection class: IP 54 Permissible operating temperature: 90/70°C Find more here - / Contact us at -

VA-10. Residual Gas Compression/Separation Stages (V 671A/B, B670) 3-stage complete system, Type SN, Built: 1990 Incl. necessary equipment, functional, part of the overall system Residual gas compression consisting of pulsation damper B674, separator B670, Tank B673, heat exchanger W672, filter B679, slop tank B675, Gas/liquid separator B661, pipelines Manufacturer: Andreas Hofer Hochdrucktechnik GmbH Technical Data: Steel sheet construction, BMG 5709/968; Find more here - / Contact us at -

2. Other and Auxiliary Systems - SNA-15. Low Voltage Control Technology Switching and control systems Siemens / AEG, system-related, Built: 1991 (Main distribution / Cabinet systems) Manufacturer: Siemens, 8PU:011, 30 fields NS switchgear combination (Motors, shunting distributions, etc.) Technical Data: - 6 relay cabinets - 2 PLC cabinets - 2 converter cabinets for fire extinguishing pumps - NS fuse outputs, etc. Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -

Crushing system force: 120 t, Open box dimensions: 5000x2400 mm, Engine: Scania, Type: diesel, Year of construction: 2001

Steinemann Colibri 104, Year 2007 1040x1420 mm (41x56") UV-Varnishing machine Mabeg feeder Calender Unit UV coating unti UV Drying unit Delivery Available: at short term

CNC processing centre with 5 axes Brand: Cosmec Type: Conquest 715 New machine Just an example for a configuration, other equipment is available on request: High-precision CNC - centre with camera centering system. Ideal machine for milling works in digital print, wood- and plastics as well as in the advertising technique Gantry drive system 5-axis main spindle complete interpolating Moving route: - X - axis 4.850 mm - Y - axis 2.630 mm - Z - axis 880 mm Working table: Vacuum grid table system, made out of Sandwich-Bakelit and, consisting of: - 1 Upper plate with grid 50 mm, also the use of COSMEC vakuum cups is possible (vacuum cups optional available) - 1 Lower plate with rectangular chanels for ideal vacuum distribution Dimensions: X - axis 4.210 mm Y - axis 2.210 mm Table can be split in 2 working fields Each field with 3 workpiece stops in X - d ...

New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...

new CNC working center Brand: Cosmec Type: Smart 30, 4 Axis example configuration: other equipment on request the smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces the controlling: OSAI CNC system controlling + Aspan CAD-CAM Software: - Aspan uses simple commands to perform machining - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Various macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing - Different door types are already stored (doors with milled arches, round doors...) - Doors can be modified individ ...

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Inv. Num. : 8262 Type: PR 99-20 Producer: Cobalm Created: 2011 Parameters: Axis X: 3400 mm Axis Y: 1900 mm Axis Z: 280 mm Cutting thickness: 200 mm

Nachi - Fujikoshi Corp Robotic Manipulator, FD -MC10L Six-axis robotic manipulator Nachi Nachi - Fujikoshi Corp (2015) Confessions: Item Description, Parameters Quantity Robotic Manipulator, FD-MC10L 1 pc ∼ Six-axis robotic manipulator nachi ∼ Max. Reach Radius 2019 mm at p-Point ∼ Repeatable Position Accuracy ± 0.06 mm ∼ Wrist Load Capacity 10KG ∼ Arm Load Capacity in the 3rd Axis Location 15kg Absolute Position Readout ∼ High Dynamics of Movements and Arm Rigidity ∼ Protection of the Wrist of the Robot Robot IP65 Control System, nachi FD11 Control Unit of Six-Axis Manipulators nachi ∼ Modular Construction ∼ ∼ ∼ Windows System Kits ∼ Application SW FOR PROGRAMMING MOTIONS FD CONTROL ∼ Built-in PLC module for peripherals ∼ Programming module teach pendant ∼ 15m ∼ JogDial Controller ∼ Ethernet Spread for network connections ∼ FTP client for data bac ...

Toothed Disc Mill CONDUX V3 5.5 kW adjustable 210 - 1577rpm V-belt drive (2x SPA 150-3), Overhauled, re-stored and sealed

Deck Oven Electric Oven Miwe Condo Model: Type: CO.5.1208 AS control Bottom heat and top heat can be controlled individually 5 baking shelves 1200 x 800 bottom 3 stoves with steam Chassis mobile with brake Connection 400V, 5 x 9 kW, 5 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 1500 x 1300 x 1950 mm, WxDxH Used oven

Manufacturer: SEW Mowiedrive Compact MDX60A0110-503-4-00, Type: MDX60A0110-503-4-00, Sale without warranty: 16,8 KVA, No right of return: 0-180 Hz, Installation height: 24 Ampere,

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

Manufacturer: Commander Frequenzumrichter, Type: SE 23400150 SE T 2,5, Serial number: 3781643037, FREE TEXT: kw 1,5, Free text 1: 0-1000 Hz, Free text 2: 6,4-4,2 Ampere,

Manufacturer: KEB, Type: Combivert, Model: 10.56., Hz: 50/60Hz, Output DC Volt: 380/415 V, Output PpK= kW: 2,2 kW,

Manufacturer: Commander SE, Type: SE 23400220, Model: SE 3,5 T, Serial number: 2083802671, Frequency converter: yes, mH/Hz: 0-1000, FREE TEXT: 380-480 Volt, Free text 1: 2,2 kw, Free text 2: 9,0-5,0 Ampere,

Manufacturer: Commander SE, Type: SE 23400400 SE 5,5 T, Serial number: 2083802671, FREE TEXT: 4 kw, Free text 1: 50-60 Hz, Free text 2: 0-1000 Hz, Free text 3: 14-9,5,

Manufacturer: Commander SE, Model: SE 2,5 T, Serial number: 3781643041, Frequency converter: yes, FREE TEXT: Ampere 6,4-4,2, Free text 1: kw 1,5,

Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011

Manufacturer: KEB Homag Umrichter, Type: Combivert, Model: 09.F0.R11-3429, Serial number: 93410337/021161, FREE TEXT: AC-MOT 1,5 kw, Free text 1: 2/4 P, Free text 2: 50-60 Hz, Free text 3: 2,8 Kva,

Manufacturer: Homag, Type: CPU PC Controlleinheit, Model: 5003, Serial number: 2-083-01-6902,

Manufacturer: Commander SE Frequenzumrichter, Type: SE 23400150 SE 2.5 T, Serial number: 3781484007, FREE TEXT: kw 1,5, Free text 1: 50-60 Hz, Free text 2: Ampere 6,4-4,2,

Manufacturer: Robatech, Type: Coceptb 5/4, Year: 2006, FREETEXT1: Wachsauftragsgerät , FREETEXT2: mit Düsensystem , FREETEXT3: für Wachsversiegelung, FREETEXT4: inkl. Düsen und Halter, Year :2006

Manufacturer: Commander SE Frquenzumrichter, Type: SE 23400150, Model: SE 2,5 T, Serial number: 3781643022, Hz: 0-1000, FREE TEXT: kw 1,5, Free text 1: Ampere 6,4-4,2,