129,676 used machines on RESALE, but how to find them? Machine Search
approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg
Didar Part Number2600208001 NSN 2930-12-A01-6407 Original Part Number 0030983920 In-Pipe Water Pressure 6.0 – 9 bar Out of Pipe Air Pressure 3.3 – 5 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 225 °C Amount of Water in the Pipe 4 Lt. Amount of Air Outside the Pipe 14 Lt.
Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.
Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.
Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.
Frequency converter F4, 45KW, 21.F4.COR-3420/2 2, KEB, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - The device has been tested and shows no faults. Technical data: - Frequency converter F4, 45KW, 21.F4.COR-3420/2 2, KEB, used - Input: 3x 305-400V 100A, 460-500V 85A, - Output: 0 - 1600Hz, 0-440V/90A, 480V77A, - Power 62KVA, 45 KW - incl. control unit Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. ...
Belt conveyor / conveyor belt / belt approx. 15.23 meters Manufacturer: Costo Year of Make: 2009 Model: Belt Condition: Used Total length incl. feed belt: approx. 15230 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 790 mm Belt width: approx. 700 mm Strap Type: Longitudinal Grooves Steel frame Frame height: approx. 105 mm Colour: Dark grey Plant consists of 8 segments 6 segments: approx. 2000 mm 1 segment: approx. 2130 mm 1 segment: approx. 1100 mm (feed belt) Internal Article Number: 2026022102 SEW motor included Feet To be ordered separately The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even und ...
Belt conveyor / conveyor belt / belt 18000x870 approx. 18 meters Manufacturer: Costo Year of construction: 2009 Model: Belt Condition: Used Total length: approx. 18000 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 790 mm Belt width: approx. 700 mm Strap Type: Smooth Steel frame Frame height: approx. 105 mm Colour: Dark grey Plant consists of 8 segments 7 segments: approx. 2250 mm 1 segments: approx. 2330 mm Feet to be ordered separately SEW motor included Internal Article Number: 2026022103 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralo ...
Bitzer CO2 composite system type TPS4-2FHC-3K with 4 compressors type 2FHC-3K for TK
Year of Make: 2014 Machine Number: API730798 Hours: 504 New compressor at 504 hours New operating hours display April 2025 Make: Atlas Copco Made in Belgium Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient motor with belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Nominal power motor 3.7 kW Engine rotation 2885 rpm Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressur ...
Control OKUMA ... OSP P300M Clamping table surface ... 400mm Axis X ... 762 mm Axis Y ... 460mm Axis Z ... 460mm Spindle speed... 1000-15000 rpm. controlled axes ... 5 cooling... 20bar SK40 Main engine power ... 22/18.5kW Magazine slots ... 48 The machine is in good condition, possible to test under power.
Compressor CompAir L 75 Operating hours approx. 3100 h was used as a reserve compressor Volume flow 10.25 m³/min Motor power 75 kW Very good ready-to-use condition, directly from production!
Condenser LUVE Contardo Type HCE 74, with three fans 630mm, approx. 80 KW
Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5
Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water
Brand: Ambaflex Type: Apollo Width of the band: 400mm Transport height at the bottom: 400 mm Transport height above: 2000 mm
1 used residual concrete recycling plant BIBKO ConTec, year of construction 1992, without control, spare parts available, rep. needy, sale ex location Upper Franconia
Compressors, control, compressor control, control panel -Handover: in its current condition as inspected -Cover bottom: damaged, see photo -Manufacturer: Ecoair -Type: Multitronic Control -Dimensions: 280/295/H120 mm -Weight: 2.6 kg
2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection
PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: PSI-MOS-DNET CAN/FO 850/BM -Price: per piece -Number: 59 pieces -Dimensions: 100/23/H110 mm -Weight: 0.2 kg/piece
CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg
Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph
Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph
PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: FL MC 10/100BASE-T/FO G1300 ST -Price: per piece -Number: 6 piece -Dimensions: 100/20/H120 mm -Weight: 0.1 kg/piece
Interface converter, converter module, FL Comserver -Manufacturer: Phoenix Contact, FL Comserver -Type: Basic 232/422/485 Ord.-No. 23 13 478 -Price: per piece -Quantity: 3 available -Dimensions: 100/20/H110 mm -Weight: 0.1 kg/pc.
Connector, plug, sensor module -4-pin -Screw locking: M12 x 1 -Nominal voltage: 250 VAC/DC -Cable entry: max. 6 mm -Connection: max.0.75 mm² -Number: 60x available -Price: per piece -Minimum order: 4 pieces -Weight: 20 g
CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg
Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 -Type: M4 -Weight: 0.3 kg
High-intensity cold light lighting system for macroscopic applications, lamps, luminaires, lighting -Handover: in its current condition as inspected -Condition: Sold as a parts donor without light bulbs (without light bulbs) -Case dimensions: 520/220H440 mm -Weight: 16.4 kg
Copy head, copy head, copy device, copy lathe -Copy head for: lathe -without: hydraulic unit -Dimensions: 1100/170/H370 mm -Weight: 143 kg
Output module, control card, output card, controller -Control -Component carrier type: C-SPS-14 -Dimensions: 375/200/H200 mm -Weight: 3.8 kg
Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg
Copy head, copying head, copying device, copying lathe -Copy head for: lathe -with: hydraulic unit -Transport dimensions: 1200/800/H650 mm -Weight: 216 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 2.2 kW -Input: 380-480 V 50/60 Hz -Output: 4 kVA 5.8 A -Number: 2x available -Price: per piece -Dimensions: 340/85/H230 mm -Weight: 4 kg
Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg
Motor control, controller -Manufacturer: Phoenix Contact, Mosca Motor Control -Type: EG 45 ME2213 -Number: 12x available -Price per piece -Dimensions: 75/45/H130 mm -Weight: 0.3 kg/pc.
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 380 V 100 Hz -Power: 18 KVA -Dimensions: 1160/480/H540 mm -Weight: 290 kg
Control unit, control, for power generator, emergency power generator, generator, aggregate, power generator, emergency power generator, power generation aggregate -Type: Compact 166-S -Number: 2x controls available -Price per piece -Dimensions: 490/110/H110mm -Weight: 2kg
Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer
Plastic crates, reusable containers Transport box, storage container, picking box Color: Blue toothed with lid Dimensions: approx. L 600 x W 400 x H 353 mm approx. 1,000 pieces available
Converter module -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg
maximum number of results exceeded
please refine your search
