leifeld co used for sale

AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850

Collette SM200 high speed bowl mixers 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls

Collman Buffing / Building / Peeling Machine Ref: RB007 Year 1980’s 50 volts 50 cycles 20kw Manual peeling, buffing, building Good for PCR truck and Light OTR tyres Latest standards

Collman Building Machine Ref: RB008 Quick building due to double rollers Manual With full rack of plates

Collman Building Machine Ref: RB003 For tyres up to 2.5m and 1m wide With hydraulic cutting unit Can use for smooth and groove Buffing arm can be supplied but will need to be rebuilt with spare motor before being able to use as a Buffer Fully operational Peel, Buff (with arm), Build, Cut Hydraulic motor you can use to cut through cured tyres (very strong arm) Modern Panel

COMPART S44.004 die cutting press was manufactured in 1995 in Germany. This production-oriented machine is mainly designed for fast and accurate cutting in various types of soft non-metallic materials but it can also be used as an extruder. Materials taken from rolls or sheets are machined by a cutting head moving along a horizontal beam. This solution allows the cutting plane to be extended to allow the operator to position the die and to insert or remove cut material. The COMPART die cutting press is offered with a screw compressor and an air tank with a capacity of 400 litres. The machine has so far been used for the production of polyethylene-based foam parts. The S44.004 cutting machine weighs 2700 kg. Technical specifications of the COMPART S44.004 die cutting press - maximum cutting force: 25 t (250 kN) - cutting speed: approx. 85 mm/s - stroke adjustment range: 15-120 mm - ...

C arm, monitor cart with dual monitor (TFT, 2 x) digital multi image storage (MX 200), good condition DICOM, 23 cm image intensifier

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edgebander Symbel Coronel; good condition; cleaned and checked, installed new bearings; Working width 60 mm; 2-roll; suitable for cold glue; Glue tank height-adjustable. Edge gluing machine Symbel Coronel; good condition; cleaned and checked; New bearings; working width 60mm; two rollers; used for cold glue; Glue reservoir adjustable in hight.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lefort / Corema lid press P400 TE for bale size 400x400 mm, press box 3 m length, opened 1.2 m wide, each wing 90 t and final compressor 100 t pressing force. Drive 30 kW Rexroth pump.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum width of forming film : 150 mm Maximim forming depth : 12 mm Mechanical output : 65 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 450 mm diameter Reel of lidding film : 250 mm diameter Air consumption : ca. 10 Nm3/h Operating pressure : 6-7 bar Cooling water : 0,12 M3/h power consumption : 12 Kw Weight : 1600 Tablet feeding system : Dedicated feeder for 3 differents tablets color Camera system with automatic discharge

Key data: 300 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04001 Type of machine CNC Lathe - Inclined Bed Type Make HARDINGE Type CONQUEST T 51 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin UK Delivery time Immediatly Freight basis ex warehouse, loaded Technical details turning diameter 300 mm turning length 500 mm control fanuc 18 T max. swing diameter 400 mm spindle head A 2-5 Bar Material Dia. 51 mm turning speed range 4000 rpm spindle drive 11/15 kW Torque 168 Nm Tool Diameter 32 mm Rapid traverse 30 m/min total power requirement 15 kW weight of the machine approx. 3.2 t dimensions of the machine approx. 2.0 x 1.7 x 1.8 m Accessories cooling attachment Additional information FANUC 18T CONTROL 3 JAWE CHUCK + taistock CHIP CONVOYER

Paper boring machine Dürselen Corta PB 04; Cleaned and tested; 4 drill heads (up to 6 stick.usable); Drill cooling and lubrication; Sliding table; Endless drilling tape; Inlay depth behind the holes 65mm; Max. Stack height 50mm; Sliding table size before the drills 300mm; Max. Drilling distance over sliding table 420mm. Paper drilling machine Dürselen Corta PB 04; The cleaned and checked; Four heads (up to 6 heads); Driller cooling and lubrication; Sliding table; endless drilling band; size behind drillers 65mm; Max.pile hight 50mm; Seft of table in front of the drillers 300mm; max.drilling distance over the table 420mm.

Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UK Power Generators Ltd have in stock the container for the generators to be inserted and perform their energy production operations. Ideal for Jenbacher 320,316, 314 312 series generators Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen it has a separate panel room for the breaker panel, control panel. Everything inside the empty container excluding the breaker panel is included in the sale. Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please see attached the pictures for the units available for sale. Kind ...