leifeld co used for sale

14-speed mounting screwdriver AC, for cylinder head mounting etc. Next: 3 spindle assembly screwdriver AC 3 and 6-spindle screwdriver ATLAS-COPCO 2 spindle screwdriver AC 3 spindle assembly screwdriver SPS & AC 1 spindle assembly screwdriver SPS

Spindle cone MK 4 Machine weight approx. 2.5 t Space requirements approx. 2.2 x 0.7 x 2.5 m

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

Charge air cooler for Wichmann 12V28 Part no: 530302 Vestas type CB32 Can be sold "as is" or overhauled, ready to fit.

Semico screw pump +booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul at Busch 6 months ago! Performance: without delivery time: ex stock

Semico screw pump + booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul for Bush months ago! Warranty: without Delivery time: In stock

U5 Lab Package For Pilot & Development Construction: 305 stainless steel with 316L stainless steel product contact parts. Surface Finish: Product contact surfaces mirror polished (Ra 0.10 micron), non-contact surfaces 150 grit (Ra 1.06 micron); welds cleaned and polished and all material contact welds ground flush and polished. Infeed Opening: 3.25" (83 mm) diameter with grid bars to prevent operator access to the rotating impeller. Infeed Chute: Hand-fed funnel, 6.4" diameter x 5" high (163 mm x 127 mm) with magnetic actuated safety interlock. Spindle Assembly: Sanitary pharmaceutical duty with pre-lubricated, sealed bearings, viton O-ring, two shaft seals, and double varilip seal in a stainless casing. Also suitable for use with vacuum. Impeller Speed: Approximately 1000 - 6500 RPM. Capacities: Varies based on tooling, feed and speed used. Discharge: 6" (152mm) tri-clamp di ...

Robots industrial robots KUKA KR200-2 comp Built in 2007 Reach 2400mm Weight 1267kg Load 200kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)

Robots industrial robots KUKA KR200L140-2 comp Built in 2007 Range 2800mm Weight 1267kg Capacity 200kg, 140kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)

Robots industrial robots KUKA KUKA KR100-3 comp safe­robot KRC2ed05 Year 2011 Reach 2400mm Weight 1155kg Load 100kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 4.14 Software safe­robot V1. 1.1 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)

Screw vacuum pump Manufacturer: Busch Type: NX 450 A Suction capacity: 450 m ³/h Warranty: 12 months Includes: user manual, oil filling status: as good as new Delivery time: Please enquire; ready for operation

1 piece flat grinding machine COSMOS E 7040 NC grinding range 700x400x350mm electric magnetic clamping plate 700x400mm single set-up, fixed for straight-straightering with compensation Programmable display 4.7 . . . . -level grinding spindle drive Universal paper strip filter; as good as new, ready for use

NILPETER MO4 - 6 colours offset label press + 4 flexo NILPETER MO4 6 COLOURS OFFSET AND 2 COL. FLEXO PRINTING UNITS LABEL PRESS WITH SLEEVE SYSTEM  Age: 2014  Unwind  Rewind  Corona treatment  2 Flexo printing units  6 offset printing units  Sleeve system for offset units  2 Flexo printing units  Cold foil application  Lamination  Web cleaning  GEW UV curin  Delam Relam unit Kocher & Beck Automatic unwinder and roll changer (Butt splicer) Kocher & Beck Automatic rewinder and roll changer (Butt splicer)  Kocher & Beck Automatic Waste Rewinder with turret  Chilled rollers for printing on film  Rotary Die Cutter with Kocher & Beck GapMaster  Slitting unit  Backside printing  Perforation cross: YES in the die cutter  Perforation lengthwise: YES in the die cutter  Screen printing 1C, then 6c offset  ...

GALLUS LABELFIRE 340 7. col. digital – 4 colours flexo – digital varnishing – cold foil – label press VERY NICE DIGITAL HYBRID LABEL PRESS WITH DIGITAL VARNISHING AND COLD FOIL GALLUS LABELFIRE 340 ECS HYBRID DIGITAL AND FLEXO PRESS UV Inkjet system with 1200 dpi  Age: 2017  2 Flexo printing units for digital printing and 2 x Flexo printing units after  Digital printing station with 7 colors  UV Inkjet  Digital colors: Cyan, Magenta, Yellow, Black, Viollet, Orange, Green  2 Flexo printing units after digital unit  Steinemann Digital Varnishing Unit  Matt  Glossy  Spot varnishing  Metal Doming  Semi Rotary Die cutter  Cold foil unit  Turning bars  Laminating  Materials: mono films 30 - 200 μm , paper 30 - 400 μm, composite materials 30 - 400 μm  Spindle core diameter: 76 mm  Max. Roll weight: 250 kg  ...

Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Collmann 23558 Lübeck Type : Hydo 24, chocolate dosing machine/chocolate depositor YOM : 2001 Output : up to 25 Takte/min We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex warehouse Hess. Lichtenau (EXW),unpacked

MPS EF330 Servo Flexographic Label Press  Age: 2004  Automatic register control  Web width: 330mm  Servo unwind  BST Electronic web guide  Vacuum web cleaner  8 x Servo Driven Flexo Print Stations  8 x UV dryers  8 x water cooled chill rolls  2 x Rotary Die Stations  Waste Rewind  Edge Slitting Unit  Rewind  BST camera system To include: Magnetics: 80z, 96z, 100z, 104z, 108z, 116z, 124z Print tooling: 7 x 80z, 5 x 96z, 1 x 104z, 6 x 108z, 7 x 116z, 7 x 124z Anilox x 8 Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly) -Online Video Inspection by WhatsApp Video-

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Collmann Type: stainless steel tank Volume ca. 3600 l dimensions: diameter 1700 mm length 1600mm different: 2 sight glasses opening 530mm x 1080mm 4 standing feet bottom outlet We offer this machine in as-is where-is condition

Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity

SOS block bottom bag machine 2 plies 4 colour tail end printer photo cell for preprinted paper Bag width: 12-26 cm Tube length: 25-47 cm Bottom width: 4-12 cm

SOUND TOP ENERGY 250 – COSTAN Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and REFURBISHED product. Latest generation products, LED lighting and years of production 2016 – 2017-2018 Dimensions: (additional dimensions can be found in the details of the images) Length: 250cm Depth: 75cm Height: 230cm Technical details: Very recent vintages: 2016 – 2017 - 2018 State-of-the-art product Regenerated Equipped with Automatic Defrost Inverter. R290 Propane Gas LED Lighting Plug-ins Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 780Lt Each product is refurbished, freezer line is tested and cleaned internally and externally. Ready to use

SOUND TOP ENERGY 250 – COSTAN Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and tested. NOT REFURBISHED Latest generation products, LED lighting and years of production 2016 – 2017-2018 Dimensions: (additional dimensions can be found in the details of the images) Length: 250cm Depth: 75cm Height: 230cm Technical details: Equipped with Automatic Defrost Inverter. R290 Propane Gas LED Lighting Plug-ins Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 780Lt Each product is tested to guarantee the perfect operation. NOT REFURBISHED.

120 ton x 4100mm (3700mm between frames) MODEVA 10 CNC Complete with STARMATIC ROBOT AUTOMATION TOOLING PACKAGE SOFETWARE PACKAGE

used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg

Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm or square 80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Qty. 1 Second-hand vertical saw Mfc.: COSEN Type: SVT-6070H Built: 2015 Capacity Height 600 mm (23.6") Capacity Throat 700 mm (27.69") Cutting Length 1250 mm (49.2")) Blade Speed: 20-80 m/min (65-262 ft/min) Blade Size (LxWxT): 6040x54x1.6 (237.8"x2"x0.06")

AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850

- Cover Lid MWM 12420476 - Please note! Price per piece! - 12420476 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into our ...

Collette SM200 high speed bowl mixers 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls

Pester Pewo pack 250 compact The basic machine PEWO-pack 250 compact comprises the following assemblies (standard equipment): - Degree of protection : IP54 (ST) - Control cabinet : Swivel - Proximity Switch : Wenglor (ST) - Pneumatic version : Pneumatics (ST) - Traffic light indicator : Tricolor (ST) - Electrical version : Electrical standard S rev 15 - Frequency converter : Lenze (ST) - Product feed : straight in the middle Specifications: - Control unit HMI - Type : HMI 15" Pester Tangius (ST) - Control : Elau PacDrive - Voltage : 3x400V+N+PE, 50 Hz/60 Hz - Operating side : right - Protective cover : Acrylic glass (ST) - Paintwork : VA - Design (ST) - Packaging material - film : PE flat film - Documentation - Language : 2x French+1x CD - Documentation - Execution : Standard - Documentation - Supplier : 1x (ST) - Validation : Standard - Machine marking : F ...

Collman Buffing / Building / Peeling Machine Ref: RB007 Year 1980’s 50 volts 50 cycles 20kw Manual peeling, buffing, building Good for PCR truck and Light OTR tyres Latest standards

Collman Building Machine Ref: RB008 Quick building due to double rollers Manual With full rack of plates

Collman Building Machine Ref: RB003 For tyres up to 2.5m and 1m wide With hydraulic cutting unit Can use for smooth and groove Buffing arm can be supplied but will need to be rebuilt with spare motor before being able to use as a Buffer Fully operational Peel, Buff (with arm), Build, Cut Hydraulic motor you can use to cut through cured tyres (very strong arm) Modern Panel

C arm, monitor cart with dual monitor (TFT, 2 x) digital multi image storage (MX 200), good condition DICOM, 23 cm image intensifier

Edgebander Symbel Coronel; good condition; cleaned and checked, installed new bearings; Working width 60 mm; 2-roll; suitable for cold glue; Glue tank height-adjustable. Edge gluing machine Symbel Coronel; good condition; cleaned and checked; New bearings; working width 60mm; two rollers; used for cold glue; Glue reservoir adjustable in hight.

COMPART S44.004 die cutting press was manufactured in 1995 in Germany. This production-oriented machine is mainly designed for fast and accurate cutting in various types of soft non-metallic materials but it can also be used as an extruder. Materials taken from rolls or sheets are machined by a cutting head moving along a horizontal beam. This solution allows the cutting plane to be extended to allow the operator to position the die and to insert or remove cut material. The COMPART die cutting press is offered with a screw compressor and an air tank with a capacity of 400 litres. The machine has so far been used for the production of polyethylene-based foam parts. The S44.004 cutting machine weighs 2700 kg. Technical specifications of the COMPART S44.004 die cutting press - maximum cutting force: 25 t (250 kN) - cutting speed: approx. 85 mm/s - stroke adjustment range: 15-120 mm - ...

UK Power Generators Ltd have in stock the container for the generators to be inserted and perform their energy production operations. Ideal for Jenbacher 320,316, 314 312 series generators Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen it has a separate panel room for the breaker panel, control panel. Everything inside the empty container excluding the breaker panel is included in the sale. Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please see attached the pictures for the units available for sale. Kind ...

POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.

Lefort / Corema lid press P400 TE for bale size 400x400 mm, press box 3 m length, opened 1.2 m wide, each wing 90 t and final compressor 100 t pressing force. Drive 30 kW Rexroth pump.

Maximum width of forming film : 150 mm Maximim forming depth : 12 mm Mechanical output : 65 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 450 mm diameter Reel of lidding film : 250 mm diameter Air consumption : ca. 10 Nm3/h Operating pressure : 6-7 bar Cooling water : 0,12 M3/h power consumption : 12 Kw Weight : 1600 Tablet feeding system : Dedicated feeder for 3 differents tablets color Camera system with automatic discharge

Paper boring machine Dürselen Corta PB 04; Cleaned and tested; 4 drill heads (up to 6 stick.usable); Drill cooling and lubrication; Sliding table; Endless drilling tape; Inlay depth behind the holes 65mm; Max. Stack height 50mm; Sliding table size before the drills 300mm; Max. Drilling distance over sliding table 420mm. Paper drilling machine Dürselen Corta PB 04; The cleaned and checked; Four heads (up to 6 heads); Driller cooling and lubrication; Sliding table; endless drilling band; size behind drillers 65mm; Max.pile hight 50mm; Seft of table in front of the drillers 300mm; max.drilling distance over the table 420mm.

Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...