leifeld co used for sale

AIR TEMP.: 600 °C, 2 CHAMBERS, SLAB DIM.: 1.54 x 3.0 x 0.35 M - W x L x T

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000

<br><br><br>Still in operation: Yes<br>Available: immediately

PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

R26097/16 EDELMANN reel offset printing machine model: COLOR PRINT V72 SL age: 2008 paper web width: max. 720 mm printing width: max. 710 mm available: about 12/2011 Servo- drive microprocessing control reel/reel, reel/ sheet unwinder: reel diameter max. 127 cm BST web edge – and centre control Web length control 2 offset printing units automatic ink unit wash-up web turn hole punch device cross cutter UV dryer plow fold system Available: nach Absprache

R25532/08W Cosmos Vega folder gluer model: 145 age: 2003, full overhauled 2010 available: immediately for corrugated board Available: sofort

3-color R23501/15 HOLWEG flexo printing machine model: Colorado age: 1971 available: short dated 3 printing units printing width: max. 100 cm Secare – reel rewinder Available: nach Absprache

R25897/18 SCHIAVI laminating machine model: ECO Convert Junior age: 1997 size: 1.350 mm available: short dated Duplex- wet- laminating with solvent-free glue sleeve diameter: 76 mm 1. unwinding max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 35 kg 2. unwinding max. reel dimater: 1.000 mm core diameter: 75- 150 mm max. reel weight: 1.600 kg web tension: 2- 20 kg rewinding: max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 40 kg Available: kurzfristig

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

24 V/ 40 A battery charger from Convertitori Statici

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

Plate filter with pump Manufacturer: Rover Pompe Type: Colombo Field of use: Olive oil Filter plates: 25 PCs. End plates: Stainless steel Sheet size: 20 cm x 20 cm Pump: Capacity: 28 l / min Conveying height: 22 m Water temp. Max: 35 ° C In very good condition! Plate filter incl. new replacement filter plates and replacement filters!

with 30 filling valves 5stelligem natural corker 5stelligem aluminium screw capper for 28 mm standard caps Direction: left - right

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM

AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Compressor ATLAS COPCO Z 55 model oil free with dryer 8 bar 55 KW

1 x Rodolfo Comerio 2200mm wide x 700mm dia two roll mill, Year of manufacture: 1981, motorised nip adjustment, Rollers bearings, Direct drive gearbox (no bullgear) With 138Kw DC variable speed motor and controls Stip knives to back roll?. In very good condition.

Universal mill for the grinding. Drive: 75 KW / 2966 UPM; 5 identical machines on stock!

Product number:M15-4194 Cooling capacity:41,6 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:10 kg Voltage:400 Volt Power consumption:16,5 kW Dimensions:2085 x 1230 x 2300 mm Weight:1013 kg Year:2012 Number in stock:2 piece(s) Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. These chillers are equipped with an expansion tank and a water pump. Please visit also our website: used-refrigeration

Impact cross mill Drive: 75 KW 6 x sieves: 4-20 mm; fully assembled on a steel substructure, with Electr. Control.

We can offer: Fischer + Krecke Type : Combi 31bb Year: 1980 Bag width 90 - 260 mm. Tube length 250 - 470 mm. Bottom width 40 - 140 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels

Atlas Copco compressor type 1202 8784 82 ed 02, 1991, serial No. ARP11832-9

for manual cutting of punched oil carton stencils, with autom. Cardboard feed, font size 7/8inch = 22 mm with the letters of the alphabet, numbers and all common Punctuation.

Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements

Full automatic video inspection and packaging system for plastic caps. Different sizes. Include elevators, hopper ZALKIN, two camera video inspection COGNEX, packaging system.

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned

Used PRALINES production line: Producer: Aasted-Microverk APS. Model: 275 MINI for a cold stamp Year: 1996 (commissioning year 1997) The line used in 1997-2014 (2015) Description: forms: approx. 3500 items (molds are in different technical condition) Types of Forms: · Molds - number of places for pralines - 28: o "rectangular" forms 28 places for pralines (14 pralines, "violin" shape, 14 pralines each) trumpet shape) o "rectangular" forms 28 places for pralines (14 pralines, harp shape, 14 pralines each) shape "piano") o Molds in the shape of a "trunk" 28 places for pralines o "Small ball" shaped molds 28 places for pralines o "Big ball" forms 28 places for pralines o "Square" forms 28 places for pralines There are approx. 2500 items of this kind. · Molds - number of places for pralines - 56: o Forms "bears", "cats" 56 places for pralines (28 "bears", "cats" each)  ...

Lid FP 4 MA Used machine (Very good) Control type CNC Built in 1990 Operating hours n/a Price 8,000 net plus VAT Dimensions 2500x2000x2500 Weight 1800 kg Location Haiger Description Universal tool ingescent machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 465x385x380mm Control: Contour 2 Technical data Technical data: Lid FP4 MA (527) Built in 1992 Control CNC Hand / Contour 2 Table 800x465mm Laengsweg (X,Y,Z axis) 465x385x380mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-3150rpm Vorschuebe 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW Machine weight approx. 1900kg Dimensions 2800x2000x2500mm

Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...

- High pressure cleaner PTC Torpedo Eco Compact 16/200 and 21/160 similar but no Dynajet, Oertzen, Falch, DIBO, - Cold water / hot water approx. 95°C, steam 32 bar to 140°C and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Eco Compact 16/200 | 16l/min. at 200bar | Diesel engine: Yanmar L100N 8.5kW - Torpedo Eco Compact 21/160 | 21l/min. at 160bar | Diesel engine: Yanmar L100N 8.5kW - Dimensions and weight without water tank: 1200x930x1080mm, approx. 230kg - Dimensions and weight with 300 l water tank: 2000x1050x1100mm, approx. 300kg - Dimensions and weight with 500 l water tank: 2000x1050x1100mm, approx. 350kg Bhdw89emgf - 80/100 kW diesel burner with electronic temperature control - High pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hours - Manometer - Pressure regulator - Safe ...

2006 completely rebuilt Clamping surface: 1,800 x 1,800 mm Table height: 800 mm Maximum table load: 20 tons. Table displacement: 850 mm Electrics: 400 V / 50 Hz

- High pressure cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 similar but no Dynajet, Oertzen, Falch, - Cold water / hot water approx. 95°C and steam 32 bar to 140°C + high pressure steam up to 150°C at 200 bar (only for versions with 250 and 350 bar) and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23l/min. at 350bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16l/min. at 500bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 hp (high-pressure steam) | 16l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 hp (high pressure steam) | 16l/min. at 350bar | Di ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...