leifeld co used for sale

Hazardous materials drip tray with cage, hinged Bauer-Südlohn Type: GD-C Best.Nr.: 206 Drip tray with cage, hinged Dimensions: W138 x H143 x D81cm³ Collection volume: 220l Material: ST37-2 Weight: 265kg Accessible from all sides with a forklift The lock has been removed. However, a new one can be inserted. The pictograms can of course be removed and/or replaced.

Controller, programmer, program controller -Manufacturer: SBF, converter dimmer with button connection with base plate -Dimmer: Type PWM -Voltage: In: 24V DC 17-32V -Number: 9x controllers available -Price: per piece -Dimensions: 120/80/H40 mm -Weight: 0.1 kg/pc.

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Gefran, power controller power regulator -Type: GTF-25-480 -Number: 5x power controllers available -Price: per piece -Dimensions: 150/60/H135 mm -Weight: 0.9 kg/pc.

Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Counting scales, scales, parcel scales, digital scales -Manufacturer: Kern, counting scale type CFS 6KO.1 -Weighing range: max. 6 kg -Division: 0.1 g -Dimensions: 340/315/H130mm -Own weight: 3.2 kg

Control panel, operating unit, control board, operating panel, operating unit, keyboard, CNC control -Manufacturer: Deckel, control unit from milling machine Deckel FP4L -Transport dimensions: 1200/800/H220 mm -Weight: 33 kg

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

Operator panel, machine control, operating unit, operating panel, handheld terminal, handheld control unit -Control unit: Hand terminal for press brakes or similar use -Connection cable: see photos -Transport dimensions: Ø 400 x 200 mm -Weight: 4.8 kg

Connectors, plugs, sensor modules -Connectors: 3-pin, 44 pieces Type: unfortunately without a designation -Price/Sale: complete -Dimensions: 41/39/H17 mm -Weight: 2.2 kg

12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204

5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204

Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.

PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU, processor, Microbox PC -Manufacturer: Siemens, Simatic Microbox PC Simatic IPC427C -Type: 6ES7647-7BJ30-3XM0 -Dimensions: 320/165/H70 mm -Weight: 2.7 kg

Connectors, plugs, single-conductor spring strip -Connectors: 3-pin, 60 pieces -Type: unfortunately without a type designation -Price/Sale: complete -Dimensions: 35/25/H15 mm -Weight: 0.05 kg/pc.

clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 26.8 kg

clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 27,1 kg

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

1. AKKORDEON-LACKIERKABINE Einfahrbare Spritzkabinen sind für manuelle Lackierarbeiten mit seitlicher Belüftung konzipiert, um überschüssigen Flüssiglack abzusaugen. Der Vorteil der einfahrbaren Flüssiglackspritzkabinen besteht darin, dass sie Platz in der Werkstatt sparen. AUFBAU Sie bestehen aus einem Scherenmechanismus aus elektroverzinktem Rechteck- und Rundrohr und sind von außen mit PVC-Gewebe verkleidet. Das Bewegungssystem umfasst Industrierollen oder ein Schienen- und Rollensystem, das je nach Außen- oder Innenbereich und Länge der Spritzkabine empfohlen wird. Eine Vorhangtür dient zum Schließen der Tür während des Lackiervorgangs. BELÜFTUNGSSYSTEM Die seitliche Belüftung sorgt für hohe Effizienz während des Lackiervorgangs. Die Filterwand ist modular aus verzinktem Blech gefertigt und mit Regalen und einer Notfalltür an beiden Seiten ausgestattet. Der Abs ...

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles -Manufacturer: GH, angle connector with web 29 pieces -Type: GH-WVB 105x105x90x2.0mm -Price/Delivery: complete -Weight: 0.3 kg/piece

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector with web 27 pieces -Type: GH-WVB 90/100S 100x100x90x3 mm -Price/Delivery: complete -Weight: 0.4 kg/piece

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector 19 pieces -Type: GH-WVB 90/100S 100x100x90x2 mm -Price/Delivery: complete -Weight: 0.2 kg/piece

rubber damper, engine damper, clutch, rubber coupling -Rubber coupling: rubber damper engine damper -Dimensions: see photos -Total dimensions: 240/210/H130 mm -Weight: 4.5 kg

metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Type: KS 7 -Bore: Ø 19 mm -Total dimensions: Ø 69 x 68 mm -Weight: 1.0 kg

metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Type: MMS 16 N1-1 -Art.No.: 5-701320 -Bore: Ø 50 x 120 mm -Total dimensions: Ø 128 x 120 mm -Weight: 3.0 kg

Inductive sensor, electronic sensor, sensor cable, connection cable, connecting cable -Connection cable: with plug and console -Type: 5-pin -Console: Designation A8.7465.7670.0 -Transport dimensions: 150/100/H15 mm -Weight: 0.1 kg

CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application

4-column punching tool, separating tool, punching tool, punch, punching die, punching stamp -Punching tool: 4 column punching tool long hole 10 x 7.5 mm -Punching dimensions: see photo with dimensions -Dimensions: 800/315/H320 mm -Weight: 120 kg

Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns, Ø 10/14/10 mm -Punching dimensions: see photo with dimensions -Dimensions: 265/105/H150 mm -Weight: 11.7 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm -Weight: 2.0 kg

PICKLING CABINET FOR CLEANING INOX PRODUCTS BEIZSCHRANK FÜR DIE REINIGUNG VON INOX-PRODUKTEN CABINET INTERNAL DIMENSIONS Length : 5.000 mm Width : 2.800 mm Height : 2.900 mm Material : Insulated sandwich panels, fire protected Basement : 150mm Illumination : 2x36W Exproof Zone-2 Entry door : Insulated sheet metal door Emergency door : 1 set Working temperature: RT WORKBENCH Length : 1.800 mm Width : 800 mm Height : 900 mm Ventilation : AISI304 extraction fan, circular air duct Material : PP material body, removable splash covers Grid : AISI304 stainless steel Sink : PP material Accessories : Hose reel, wardrobe Droplet separator WASTE WATER ROOM Length : 2.000 mm Width : 2.800 mm Height : 2.900 mm Basement : 150mm Illumination : 2x36W Exproof Zone-2 Entry door : Insulated sheet metal door Working temperature: RT Emergencydoor  ...

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg

Compressors, screw compressors, compressor coolers, compressor coolers -Manufacturer: Steeb-Industriekühler, compressor cooler with filter from screw compressor BlitzTyp Monsun 7.5 P -Art.No.: 100213 -Dimensions: 455/350/H190 mm -Weight: 8.1 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: MK5 -Type: F BF 5d4-36 MK M20 -Clamping sleeve: Ø 15 mm -Total dimensions: Ø 90 x 250 mm -Weight: 4.4 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK40 2 pieces -Type: Ø 63 x 150 mm -Clamping sleeve: Ø3 mm / Ø10 mm -Price/Delivery: complete -Transport dimensions: 150/120/H63 mm -Total weight: 2.6 kg

VM PLC CONTROLLED POWDER COATING RECIPROCATOR The powder coating reciprocator is designed for automated painting applications. It ensures perfect coating of the work pieces passing in front of it by moving the spray guns up and down in a single axis. It moves in one axis along the vertical guide column, providing maximum performance under daily working conditions withstanding continuous load. The brake drive motor and gearbox have been choiceed to ensure the reciprocator’s long life and performance under heavy working environment conditions. The mechanical system design with chain or belt provides silent and vibration-free vertical movement. Perfect coating is achieved with easy adjustment of stroke and speed. RECIPROCATOR CONTROL UNIT • Remote control panel 7" 65K color hand touch LCD screen, • Two reciprocators can be controlled independently from the same display, � ...

clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 80 mm, 5 pieces -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg

c

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK50 -Clamping sleeve: Ø31 mm -Dimensions: Ø 88 x 200 mm -Weight: 3.0 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK40 -Bore: Ø 16 mm -Total dimensions: Ø 64 x 170 mm -Weight: 1.0 kg

clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 115 mm, 20 pieces -Sizes: Ø 2 - 14 mm, see photos -Price/Delivery: complete -Transport dimensions: 330/190/H120 mm -Weight: 3.6 kg

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 80 mm, 23 pieces -Sizes: Ø 8 - 40 mm, see photos -Price/Delivery: complete -Transport dimensions: 360/260/H80 mm -Weight: 19.2 kg

clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 70 mm, 17 pieces -Sizes: Ø 10 - 40 mm, see photos -Price/Delivery: complete -Transport dimensions: 300/170/H70 mm -Weight: 9.3 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven -Roll width: 480 mm -Rollers: Ø 80 mm -Roll spacing: 200 mm -Dimensions: 1920/520/H150 mm -Weight: 50 kg

Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: without drive -Roll width: 1150 mm -Rollers: Ø 82 mm -Roller spacing: variably adjustable -Dimensions: 2300/1350/H200 mm -Weight: 231 kg

The system consists of 9 different roller conveyor belts and 1 plastic link belt: • Roller conveyor belts, short, 2 pieces, type ITF/R-VV50, L 135 cm, roller width 35 cm, interroll drives • Roller bridge belts, 2 pieces, type ITF/R-VV50, L 98 cm, roller width 35 cm, interroll drives, fold-up • Accumulation roller conveyor belt, long, 1 piece, type ITF/R-FT50, L 294 cm, roller width 37 cm, slide belt drive, only runs when rollers are occupied • Accumulation roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 195 cm, roller width 35, belt drive, runs only when rollers are occupied • Roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 188 cm, roller width 35 cm, interroll drives • Roller curve belts 90°, 2 pieces, type ITF/RK-RT30-90° left/right, roller width 35 cm, interroll drives • Plastic link conveyor belt, long, 1 piece, type ITF/MGK, L 646 cm ...

length: 4.000 mm width: 160 mm height over floor: ca. 850 mm total power requirement: ca. 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK50 -Clamping sleeve: Ø 16 mm -Total dimensions: Ø 100 x 245 mm -Weight: 4.1 kg