leifeld co used for sale

Güntner GVX 071V.1A/3-ED. E axial fan condenser Fan 500mm ⌀  Number of fans 3 Extremely quiet design  Voltage 400 V 3~ 50 Hz Year of construction: 2010 Max/Min Pressure 32bar/-1bar Max/Min Temperature -50 to + 100 degrees Volume: 29 litres  Total dimensions approx.: L:410cm D:110cm H:125 cm  Condition: Used More condensers - new and used - can be found in our shop! International shipping costs on request!

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg

Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier Base Board, Steam Generator Board -Manufacturer: Hygromatik, MP humidifier control display -Type: MP E-2522450 -Dimensions: 155/50/H95 mm -Weight: 0.3 kg

CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Container, granule container, storage tank, powder container, storage tank, color powder container -Container: Stainless steel container with sieve insert -Capacity: approx. 500 liters -Strainer: Ø 10 mm -Container contents: color powder -Dimensions: 1070/860/H950 mm -Weight: 201 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m -Roll width: 1200 mm -Roller diameter: 83 mm -Roller spacing: 200 mm -Dimensions: 3600/1220/H265 mm -Weight: 206 kg

Complete used concrete block plant Fabr Henke with core and attachment lifting ladder lowering ladder vehicle group packager about 25 molds, batching plant, core concrete mixer, attachment mixer, paint dosing. The facility is very well maintained and in a condition that can be used directly. The facility can be visited at any time in consultation with us. More details on request.

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Unfortunately the type is no longer readable -Container content: approx. 25 liters -Total dimensions: 420/360/H3500 mm -Weight: 13 kg

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 -Type: RC-E 10 -Total dimensions: 380/180/H125 mm -Weight: 2.2 kg

Cold room lock, cold storage lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock, unused, original packaging -Type: 3.16.416.2 Links -Number: 8x door locks available -Price: per piece -Cardboard dimensions: 260/150/H40 mm -Weight: 1.1 kg/pc.

Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...

Henke Variant concrete block production plant, core and attachment Complete with lifting ladder, lowering ladder, vehicle group, drying rack, mixing plant, core and attachment mixer, aggregate silos, cement silos. The facility is very well maintained and ready for immediate use and can be visited at any time in consultation with us. For more information, please do not hesitate to contact us.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 4x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

Cold room lock, cold room lock, mortise snail lock, cold room door lock -Manufacturer: STUV, cold storage lock unused Ovp -Type: 3.16.416.1 KRT Lock V2A -Number: 5x door lock available -Price: per piece -Carton dimensions: 260/150/H40 mm -Weight: 1.1 kg/piece

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 1,99 m -Roll width: 630 mm -Roller diameter: 90 mm -Roller spacing: 200/300 mm, adjustable by 100 mm -Dimensions: 1990/800/H300 mm -Weight: 107 kg

Weiss SC 1000/+20IU Corrosion Climate Alternating Test Chamber White SC 1000/+20IU down to –20 °C Salt spray chamber More items - new and used - can be found in our shop! International shipping costs on request!

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered -Roll width: 795 mm -Rollers: Ø 90 mm -Roller spacing/axle distance: 100 mm, 10 rollers are missing, see photos -Total length: 3.73 m -Transport dimensions: 3730/970/H155 mm -Weight: 307 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: without drive motor -Roll width: 1160 mm -Rollers: Ø 90 mm -Roller spacing/axle distance: 200 mm, 2 wheels are missing, see photos -Total length: 2.49 m -Transport dimensions: 2490/1230/H95 mm -Weight: 145 kg

Key data: 400 mm, 400 mm, 375 mm

Machine Details Stock-No. 1105-03922 Type of machine Machining Center - Universal Make DMG DECKEL MAHO Type DMU 40 EVO Year of manufacture 2013 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 400 mm Y-Travel 400 mm Z-Travel 375 mm control iTNC 530 Heidenhain Turning speed range - Main spindle max. 20,000 min/-1 power capacity - main spindle 19 kW max. torque 130 Nm tool taper SK 40 swivellable -105+ 40 ° table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load approx. 275 kg rotatable C: 360° Max. workpiece diameter 500 mm max. workpiece height 400 mm number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip to chip a ...

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: Festo, compact cylinder type ADNGF-25-50-PA 554236 -Stroke: 50mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -Quantity: 1x cylinder available -Dimension: 105/40/H40 mm -Weight 0.3 kg

Vehicle group with turntable and support arm adjustment Fabr. Locksmith 16 floors 320 / 640 mm control Simatic S 7 board size 1400 x 950 mm double joint. Lifting ladder Fabr Schlosser with buffer / storage Floor spacing 320 / 640 mm 16 floors double joint Countersunk ladder Fabr locksmith with buffer / storage Floor spacing 320 / 640 mm 16 floors double joint The machines and plant components are still in operation and can be inspected in consultation with us.

Compressed air filters, fine filters, filters, flange filters, compressed air microfilters -Manufacturer: Domnick Hunter, compressed air filter -Type: unfortunately no exact type designation -Dimensions: see photos -Dimensions: 270/150/H495 mm -Weight: 7 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Vehicle group with turntable and support arm adjustment Fabr. Locksmith 16 floors 320 / 640 mm control Simatic S 7 board size 1400 x 950 mm double joint. Lifting ladder Fabr Schlosser with buffer / storage Floor spacing 320 / 640 mm 16 floors double joint Countersunk ladder Fabr locksmith with buffer / storage Floor spacing 320 / 640 mm 16 floors double joint The machines and plant components are still in operation and can be inspected in consultation with us.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -IDENT NO.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.6 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: HACO, control panel with foot switch from press brake type PPES 30135 -Footswitch: Amber, with 2 pedals -Connections: see photos -Dimensions: 800/740/H1095 mm -Weight: 25 kg

CNC control, power supply, power supply, switching power supply, power supply, servo module, control unit, Promodul -Manufacturer: Schleicher, Promodul control unit from Ilsemann KCD 1 packaging machine -Type: KEG 24-30 -Dimension: 600/145/H180 mm -Weight: 7.7 kg

2 KR C2 robot arms with KCP2 controller. Of these, one system is complete and operational and will be in use until October 2023. There is a factory warranty for the control system with a remaining term of 20 months The other serves as a spare parts donor. The system is replaced by the successor and is fully functional.

Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Manufacturer: Robosoft, Control Unit from HACO press brake type PPES 30135 -Type: HACC 013 -Dimensions: 100/85/H80 mm -Weight: 0.2 kg

Recon Part number: 555 030 20 20/42 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Control card: from press brake HACO type PPES 30135 -Type: HACE 032 -Dimensions: 95/70/H50 mm -Weight: 0.1 kg

CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board, main relay board -Manufacturer: Robosoft, main relay board from press brake HACO type PPES 30135 -Type: PC15 PPESV2 -Board: 338-0149V3 -Dimensions: 400/200/H85 mm -Weight: 2.2 kg.

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, steep conveyor, steep conveyor, chip conveyor, chip conveyor -Conveyor belt: conveyor belt -Speed: 25 m/min -Strap width: 450 mm -Conveying length: 795 mm -Engine/gearbox: WEG OCG 532 0.08 kW -Total dimensions: 800/670/H155 mm -Weight: 23 kg

Recon Part number: 524 030 12 20 EX59403800070/42 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN16 -Quantity: 1x valve available -Dimension: 180/140/H280 mm -Weight: 7.2 kg

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN20 PN16 -Quantity: 1x valve available -Dimension: 150/130/H260 mm -Weight: 4.4 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered -Roll width: 395 mm -Rollers: Ø 50 mm -Roller distance/axle distance: 125 mm -Conveying length: approx. 1375 mm -Transport dimensions: 1500/440/H145 mm -Weight: 11.6 kg

Recon Part Number: 1212 8921 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Containers, transport containers, sea containers, steel containers, ISO containers -Container: Steel container with underframe, can be driven under -Container interior dimensions: 6930/2450/H2350 mm -Gross weight: 6000 kg -Transport dimensions: 7200/2500/H2570 mm -Transport weight: 2880 kg

Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Manufacturer: Stöber, frequency converter type -Input: 3x 400 V - 50/60 Hz -Output: Hertz 0-150 Hz max. 4 kVA -Dimensions: 270/100/H300 mm -Weight: 5.9 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1680 mm -Recordings: M10 -Quantity: 1 piece available -Dimensions: Ø 60 x 1680 mm -Weight: 7.1 kg

Recon Part Number: 1230 7743 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1370 mm -Shots: M10 -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 1370 mm -Weight: 5,7 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1250 mm -Shots: M10 -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 1250 mm -Weight: 5,7 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Diameter: 60 mm -Total length: 840 mm -Shots: 15/12 mm / Ø15 mm M10 see photos -Quantity: 1 piece available -Dimensions: Ø 60 x 840 mm -Weight: 3.6 kg

Transnorm conveyor belt GF 6600-600-500 RA2137 Technical data: Conveyor length (NL): 6600 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4 Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentrala ...