le used for sale

Hänel Lean-Lift 3260-635 HS32 Vertical Lift Storage System Manufacturer: Hänel Büro- und Lagersysteme Type/Model: Lean-Lift 3260-635 HS32 Year of manufacture: 2021 Serial number: 700.112/10-0 Quantity: 1 unit Automated vertical lift storage and retrieval system with enclosed high-bay construction, motorized tray handling, extraction mechanism and operator access opening with Hänel control terminal/inventory interface. Electrical supply: 400 V, 3-phase, 50 Hz Rated current: 16.1 A Power: 7.5 kW Maximum supply protection: 20 A / 400 V Maximum tray/container load: 400 kg Maximum number of containers/trays: 81 Maximum total load capacity: 40,000 kg (2 × 20,000 kg) Approx. dimensions (L × W × H): 3,260 × 3,000 × 9,000 mm Approx. weight: 8,000 kg Vertical/horizontal motor types indicated on the identification plate: MB2501LS12VL-MG/FCRJ01 and S37DRS71M4/BE05/T ...

X / Y / Z axis strokes: 1020 × 510 × 550 mm Spindle power: 11 kW Max. spindle speed: 6,000 rpm Spindle taper: BT 40 Tool magazine: 22 positions Weight (kg): approx. 6000 Year & Manufacturer: 1993 – FONG LEE Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4060

Manual stainless steel mobile hoist, Sold without container, Capacity 120kg, Weight of the stem (kg): 190 , load capacity (kg): 120 , Weight of the gallows (kg): 190 , Dimensions (mm): 1645x800 H 1970, Maximum height (mm): 1620, Spacing dimensions (mm): 670, Minimum spacing dimensions (mm): 310, Max height (mm): 1620, Gap dimensions (mm): 670

NEW, 30 cm width, with Lehnhoff MS03 Symlock mount, 89 kg dead weight, suitable for 4 - 5.5 t excavators

Description: a three-point hitch for behind a tractor; a hydraulic cylinder to adjust a part; a large rear roller to flatten the bottom again and press it slightly; for the roller in combination of teeth/drag parts that loosen and level the top layer. Auction-ID: A3-46134-17526

Subaru Legacy Outback 2.0 Diesel, automatic gearbox 253.875 Original kilometers Euro 5B standard Multimedia System Navigation Rear camera Parking sensors Keyless entry & go Towbar Isofix Automatic Air Conditioning, 2 zones Seat heating Cruise Control Power windows Multifunction steering wheel Central locking with remote control Auction-ID: A3-46098-5884

Four-sided woodworking planer and moulder with five machining spindles, powered feed rollers and an extended infeed table with side guide. Equipped with adjustable spindle assemblies, mechanical position indicators, pneumatic feed-roller pressure cylinders and individual extraction hoods with flexible hoses. Enclosed machining area with lifting access covers, inspection windows and internal lighting. Front adjustment handles, push-button controls, emergency stop, rotary main switch and separate control console. LEADERMAC and ITALPRESSE markings. Auction-ID: A1-50699-45

Options: Air conditioning, Climate Control, Cruise Control, Auction-ID: A1-40324-50

Wood chipper 120 mm AND Daewoo Leaf Blower DABL7662 JCB - CH150120PE - Wood chipper 2026 - Shredding capacity 120 mm - 15hp AND a Daewoo - DABL7662 - Leaf blower 4-stroke - 2.2kW - 7000 rpm 15 hp 4-stroke JCB petrol engine, 457 cc, with electric start. Equipped with a 360° rotatable exhaust and guide, 400 mm diameter pneumatic tires and built-in off-road tow bar, belt drive. Shredding capacity 120 mm, opening size feed hopper 588x440 mm, feed opening 278x167 mm, disc size (diameter/thickness) 600 mm. Two robust rectangular cutting blades and six sharp triangular chipping blades designed to pull in and shred branches up to a colossal diameter of 120mm. Leaf blower 2.2 KW motor - 4 stroke - air speed 82 m/s - air volume 950 m2/h - 2000ml tank including accessories - max. Engine speed: 7000 rpm. Unused in the box. Auction-ID: A1-40324-74

Lelyterra 300-22 rotary harrow, with a working width of about 3 metres, equipped with a gearbox, PTO drive, rotors with tines and a rear bar roller for levelling and pressing the soil. Machine for seedbed preparation. Auction-ID: A3-46134-41041

This Harley Davidson Legend Drag Softtail Custom Built comes with original documentation such as registration documents. This vehicle was completely restored and Custom built at the time. The vehicle is equipped with various expensive accessories. This work was carried out well and expertly. This Harley Davidson Legend Drag Softtail Custom Built is both technically and cosmetically in very good and well-maintained condition and has been well and expertly maintained since its construction. Valuation report available worth 27,500.00 euros Viewing by appointment Auction-ID: A1-40324-26

material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:2,8 t Dimensions (WxDxH):1,6 x 2,2 x 2,3 m

material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:3,1 t Dimensions (WxDxH):2,2 x 1,5 x 2,8 m

material width:400 mm material thickness:0,6 - 2,8 mm no. of straightening rolls:5 straightening roll diameter:40 mm no. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mm material thickness at 65 mm material width:2,8 mm power capacity:3,0 kW weight:0,45 t Dimensions (WxDxH):0,8 x 1,8 x 1,35 m

material width:250 mm material thickness:0,4 - 3,5 mm no. of straightening rolls:9 straightening roll diameter:30 mm speed:3 - 15 m/min material thickness at 250 mm material width:3,0 mm material thickness at 200 mm material width:3,5 mm power capacity:1,8 kW weight:0,9 t Dimensions (WxDxH):1,45 x 1,4 x 1,55 m

material width:200 mm material thickness:0,8 - 3,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm material cross-cut:400 mm² speed:3 - 15 m/min power capacity:0,75 kW weight:0,5 t Dimensions (WxDxH):1,0 x 1,0 x 1,4 m

material width:250 mm material thickness:0,25 - 3,0 mm no. of straightening rolls:11 straightening roll diameter:30 mm speed:6 - 60 m/min power requirement:15,0 kW weight:1,1 t dimensions (WxDxH):1,1 x 1,7 x 1,5 m striaghtening pressure automatic:hydraulic coil loof control:ultrasonic

NEW, 100 cm width, with Lehnhoff MS03 Symlock mount, 207 kg dead weight, suitable for 4.0 - 5.5 t excavators