129,015 used machines on RESALE, but how to find them? Machine Search
Key data: 2 mm
Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.
Ref. -No.: 10258 Manufacturer: SCHAERER Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Lining: Forkardt F315 Brand Machine length: 3.800 mm Machine width: 1.300 mm Machine Height: 1.500 mm Weight Of The Machine Ca.: 4 t Tool holder type: Multifix Typ C Turning Length: 1.800 mm Turning Diameter Over Bed: 520 mm Turning Diameter Over Slide Rest: 320 mm Spindle Bore: 62 mm Bezel diameter (inside): 270 mm Hole in the jaw chuck: 84 x 120 mm
Ref. -No.: 10257 Manufacturer: HEIDENREICH & HARBECK Year of construction: 1981 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPM Machine length: 2.900 mm Machine width: 1.200 mm Machine Height: 1.800 mm Weight Of The Machine Ca.: 3,5 t Tool holder type: Multifix Typ B Turning Length: 1.000 mm Turning Diameter Over Bed: 480 mm Turning Diameter Over Slide Rest: 295 mm Bezel diameter (inside): 1 x 145, 1 x 255 mm
Automatic Vial or Ampoule Leak Detection Machine Bosch KLD1042 Year of construction: 2008 Diameter of ampoules min./max.: 10 - 32 mm Speed: 24,000 ampoules/hour up to Ø 13 mm (3ml ampoule) 18,000 ampoules/hour up to Ø 18 mm (5ml ampoule or 4R vial)
centre height: ca. 150 mm centre distance: 1300 mm : vorhanden diameter: ca 250 mm digital readout: 1x make: Heidenhain u. Werkzeug-Sc serial number: 63-06 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3000 kg -Chain length: 1200 mm -Number: 29 available Price: per piece -Weight: 12 kg/piece
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 6000 kg -Chain length: 16 m -Quantity: 2 available Price: per piece -Weight: 80 kg/piece
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 115.163 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 1500 kg -Chain length: 1 m -Weight: 12 kg
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 1500 kg -Chain length: 1.5 m -Weight: 20 kg
colour units: 1 0 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.285 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 100.524 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11700 ( 3 ...
Key data: 2 mm
Strip width 1,500 mm, strip thickness 0.5-2.0 mm, number of straightening rollers 6 pcs., feed rollers 2 pcs., coil weight 3,000/ 5.000 kg., longitudinal shears 4 cutting heads manually adjustable, min. width 100 mm electric control new, Hasp can be used as both an unwinding and rewinding reel. Appendix cpl. Outdated, i.e. new.
Transnorm Rising falling Incline belt conveyor with leading belt GF 1300+6000+1900-700-600 RA2072 Technical data: Conveyor length (NL): 9200 mm ( 1900 mm arch + 6000 mm riser segment + 1300 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9200 ...
Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4250 ( 8 ...
Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 180 x 4 mm -Dimensions: 800/400/H900 mm -Weight: 60 kg
Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 240 x 4 mm -Handover in its current condition as inspected -Dimensions: 400/150/H1200 mm -Weight: 46 kg
Sourdough Mixing Kettle Anneliese Biomat -Sourdough machine -Anneliese -Biomat -mobile on castors -Stainless steel
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 175.887 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1 t
Machine Type: Toggle Press Manufacturer: Schmidt Type: 14R-08-2007 Year of construction: 2007 Weight: approx. 23kg Force max. 12KN Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 590 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-9 DESCRIPTION We offer you a used toggle lever press from the manufacturer Schmidt. A further 54 presses are on offer. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...
Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fram ...
Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2116 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of ...
SECOND-HAND CN SELF-LEARNING CARVING MACHINE GIORDANENGO - center distance 20 mm. - 10+10 bit each side - total 40 bits
SPECIFICATIONS: Aggregates: 04 1 fixed unit 3 more swivelling/oscillating units Max. machining thickness mm: 100 Grinding speed adjustable Installed capacity KW: 15.0 Conveyor belt width mm: 250 Pneumatic adjustment Upper pushers arranged on 2 rubberized rails Side bracket for wide workpieces
Container conveyor system Knapp Over 650 meters Knapp conveyor system with 57 and 65 cm width, many special components, year of construction 2010 This very well-maintained conveyor system from Knapp serves 6 packing stations and 6 picking stations and offers the possibility of putting together any desired system of similar size. The components are diverse: • Pressure-free roller conveyors with pneumatics • Over 15 roller conveyor curves with flat belt and round belt drive • Some routes are suitable for transverse transport (conveyor width over 60 cm) • 2 Nerak conveyors with a lifting height of over 10 metres • Over 20 belt converters • Belt conveyors of various lengths • Packing tables and scales General conditions The system can be dismantled by the buyer. Or we offer dismantling. The system can be reconfigured together with us. The combinat ...
sheet width - max.: 170 mm plate thickness: 3,4 mm angle steel/side length: 50 mm weight of the machine ca.: 70 kg dimensions of the machine ca.: 0,7 x 0,16 x 2,1 m Is cutting flat steel, L-beam, Scorper, round and square material. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Aperture F 1.4 , focal length 16 mm + linear polarizing filter PR032-25.5 + red bandpass filter BP660-25.5
Length stop with roller conveyor Length: 3 meters Handwheel adjustment Measuring tape with magnifying glass
Level controller -Type: ENH-10 -Number: 2x switches available -Price: per piece -Weight: 1.3 kg
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.346 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Monitor LED 46\" seamless SAMSUNG UD46C Auction-ID: A1-44225-247
NEC NP08ZL 1.78-2.35:1 VPR Lens Auction-ID: A1-44225-144
NEC PA653ULG with NEC P41ZL r.p. 1.3-3.02:1 optics Auction-ID: A1-44225-38
SANYO LNS-S20 1.78-2.35:1 VPR Optics Auction-ID: A1-44225-223
SANYO LNS-S20 1.78-2.35:1 VPR Optics Auction-ID: A1-44225-215
Monitor LED 46\" seamless SAMSUNG UD46C Auction-ID: A1-44225-244
SANYO LNS-S20 1.78-2.35:1 VPR Optics Auction-ID: A1-44225-218
Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...
SANYO LNS-S20 1.78-2.35:1 VPR Optics Auction-ID: A1-44225-228
NEC PA653ULG with NEC P41ZL r.p. 1.3-3.02:1 optics Auction-ID: A1-44225-34
Monitor LED 46\" seamless SAMSUNG UD46C Auction-ID: A1-44225-245
Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...
Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Drive: Round belt continuous curve + straight section Scope of delivery: including side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: nominal voltage: 400 Running direction: LEFT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside w ...
PANASONIC ET-D75LE3 R.P. OPTICS 2.40 – 4.66:1 Auction-ID: A1-44225-4
maximum number of results exceeded
please refine your search
60 € 
